"wiremold"

Use as blank cover or tap off KO in center of plate for 1/2" trade size conduit. G3007C Device Bracket included. Ivory

Category: Small 2-Piece Metallic Raceway Covers

PN5 Series Drop Ceiling Connector for dropping cables from ceiling into the raceway. Has 1/2" and 3/4" concentric trade size KOs. Includes PN153R Reducer Adapter for use with PN03 Series Raceway. Finish - Ivory

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

90 degree internal corner, with integral dividers, that provides a 2" (51mm) cable bend radius for UTP and fiber optic installations. Ideal for lay-in or pull-through installations. Finish - White

Category: 2-Piece Non-Metallic Raceway Elbows

Eight outlets, lighted switch, rugged gray aluminum housing, 15A, 6' (1.8m) 14/3 SJT black cord with NEMA5-15 plug. Length 48" (1.2m). Receptacle center-to-center 5 1/4" (133mm). Snap-on, slide-off mounting.

Category: Work Surface Power Centers

Steel, Entrance End Fitting, V2400 Series. Size: 2-11/16" Length, 1-7/8" Width, 2-1/8" Height. Includes: 1/2", 3/4" Trade Size KOs, 1/2" Trade Size KO. Black.

Category: Small 2-Piece Metallic Raceway End Fittings

Aluminum, Prewired Plugmold, Tamper-Resistant, Length: 5 ft. Color: Aluminum. Outlets (6") O/C: Total Outlets: (9) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Non-Metallic, 1-Gang, Large Data Box, Series: Eclipse PN03, Pn05, PN10. Size: 3-5/8" Height, 2-7/8" Width, Color: Ivory. Surface Mount Box for Raceway or Standalone application. Accepts 1 front-loaded downward facing device

Category: 1-Gang Raceway Device Boxes

Nonmetallic Plugmold 6' in length with receptacles spaced 12" on center. Nonmetallic Plugmold has a textured ivory finish. For use with 20 amp circuit. Finish - Ivory

Category: Single Circuit Non-Metallic Plugmold

When using any of the 862 Series Floor Boxes in a concrete floor, this kit will provide a mud cap for the concrete pour, two 3/4" trade size conduit hubs, and a scrub water gasket. Not needed for wood floor installations.

Category: Recessed Floor Box Tools

Exterior-gang 1" trade size conduit service feed assembly. Designed to allow connection to 1" trade size conduit feed in one (1) of the four (4) exterior-gang locations.

Category: Recessed Floor Box Service Fittings

5" Round Cover, Non-Metallic, Cover Type: Slide. Device Type: Duplex Receptacle. Material/Finish: Polycarbonate/Gray. For use in Carpet and Tile Applications.

Category: Round Recessed Box Covers

Aluminum, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: Aluminum. Outlets (6") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

3-Wire 125V NEMA 5-15R orange receptacle. Includes 10 1/2" [267mm] pigtails and inline splice connectors.

Floor Box, Rectangular, (4) Compartment, Depth: 5 Inch, 1/2 & 3/4 Inch Knockouts, Housing: Die Cast Aluminum, Black Tile Lid.

Category: Recessed Compartment Boxes

120 Volt, 15 Amp, 6-Outlet Strip w/Switch, Medical/Dental Grade, 15 Feet 14-3 SJT Cord Length, Powder Coated Steel Housing - White.

Category: Medical Grade Power Strips

Recessed Prewired Poke-Through Assembly With Surface Style Cover, 10 Inch Diameter, Aluminum With Gray Powder Coat Finish, For Use in Tile, Wood, Terarazzo Applications

Category: Assembled Poke-Through Units

Includes round PVC floor box, one 15A, 125V tamper-resistant decorator style duplex receptacle, one coax F connector, one RJ45 Category 5e connector, and brass duplex opening cover plate with single flip lid.

Category: Assembled Recessed Round Boxes

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Tamper-Resistant Surface, Material/Finish: Die-Cast Aluminum/Bronze Powder-Coat.

Category: Poke-Through Cover Assemblies

Steel, Prewired Plugmold, Length: 2 ft. Color: Stainless. Outlets (6") O/C: Total Outlets: (4) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Steel Plugmold

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Tamper-Resistant Surface, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat.

Category: Poke-Through Cover Assemblies

1" (25mm) I.D. grommeted opening. NOTE: Four-piece service fittings include: housing and base plate. Receptacles included when indicated in part number description. 525 Series Service Fittings have 27 cubic inches (442ml) of capacity.

Category: Recessed Floor Box Service Fittings

Makes right angle turns around internal corners of 2900 Series Raceway running at right angles. Maintains 1 1/4" (32mm) bend radius when installing UTP and fiber optic cable. Finish - Ivory

Category: 1-Piece Non-Metallic Raceway Elbows

4-1/4" Round Cover, Metallic, Cover Type: Brass or Aluminum cover plate (1/2" Opening). Device Type: Communications or Power Cover Plate. Color: Brass. For use in Carpet Applications.

Category: Round Recessed Box Covers

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Tamper-Resistant Flush, Material/Finish: Die-Cast Aluminum/Black Powder-Coat.

Category: Poke-Through Cover Assemblies