"wiremold"

Mounts devices spaced 12" (305mm) on center using 4047 Series device plates. Ivory

Category: Large 2-Piece Metallic Raceway Covers

A radiused insert for the ALA3817 and ALA4817, ALA3817N, ALA4817N, ALA3818, and ALA4818 fittings to provide a bend radius of 2" (51mm) for Fiber Optic/Category 5e installations. The insert is ideal for new and retrofit applications whether the cable installation is lay-in or pull-through

Category: Metallic Raceway Clips & Couplings

Steel, Blank Cover, 500, 700 Series. Size: 2-3/8" Diameter, 1/4" Width. Includes: 1/2" Trade Size KO in Center. Ivory.

Category: Round Raceway 3/0 Outlet Boxes & Covers

5-1/2" Round Cover, Metallic, Cover Type: Single Service (1" Opening). Device Type: Single Receptacle or Data Port. Color: Brass. For use in Carpet Applications.

Category: Round Recessed Box Covers

Slide Holder Assembly, Hole Size: 3 Inch, Available Colors: Black, Gray, Ivory, Non-Metallic Brass, and Non-Metallic Aluminum, Assembled with Scrub Water Gasket, For Use on Tile or Carpet Floors.

Category: Assembled Poke-Through Units

A 90 degree internal corner with integral dividers to provide 2" (51mm) cable bend radius for UTP and fiber optic installations. Each leg is 4 1/2" (114mm). Ideal for lay-in or pull-through installations. Finish - White

Category: 2-Piece Non-Metallic Raceway Elbows

Use with AMD8C Series Covers to complete installation. AMD8 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Assembled Poke-Through Units

Steel, 90° Divided Internal Elbow, 2400 Series. Size: 1-3/4" Length, 1-29/32 Inch Height, Color: Fog White

Category: Small 2-Piece Metallic Raceway Elbows

5' Steel Plugmold Multioutlet Strip with 5 duplex receptacles spaced at 12" GB Finish - Ivory

Category: Single Circuit Steel Plugmold

One-gang pass through housing assembly. Designed to allow pass through of communication cables when no conduit is required. NOTE: When using on a 6ATCFF Furniture Feed unit, 1BHA (sold separately) is required.

Category: Poke-Through Mounting Plates

Steel, Prewired Plugmold, Length: 6 ft. Color: Gray. Outlets: (8) 15A, 120V: Single Circuit, Single Outlets.

Category: Single Circuit Steel Plugmold

Cover Assembly, Surface Style, Solid, Material/Finish: Die Cast Aluminum/Bronze, No Cutouts are Provided for Floor Coverings.

Category: Round Recessed Box Covers

Sixteen outlets, lighted switch, rugged gray aluminum housing, 15A, 6' (1.8m) 14/3 SJT black cord with NEMA5-15 plug. Length 48" (1.2m). Receptacle center-to-center 2 1/2" (64mm). Snap-on, slide-off mounting.

Category: General Duty Power Strips

<p>Adjusting ring (with three adjusting screws) for use with 437 Attaching Rings - communication only (brass and polycarbonate fittings) and power for polycarbonate fitting only. 3 25/32'' (96mm) O.D.</p>

Category: Recessed Box Adapters

3-Gang, Floor Box, Metallic, Depth: 3-7/16". Cubic Inches: 68". Knockouts: (9) 1/2", (11) 3/4" & (2) 1". For use in Wood Floors.

Category: Square Recessed Floor Boxes

For mounting Ortronics Series II modules into 5507 opening. Includes two outlet identification labels with clear covers and two matching screw covers. Ivory

Category: 2-Piece Non-Metallic Raceway End Fittings

Steel, 1-Gang, Single Channel Decorate Device Plate, DS4000 Series. Size: 6" Length. Fog White. For 15A or 20A Duplex receptacles, or 106 style Data Frames.

Category: 1-Gang Raceway Box Covers & Faceplates

Steel, Prewired Plugmold, Length: 5 ft. Color: Gray. Outlets (12") O/C: Total Outlets: (5) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Steel Plugmold

Floor Box Assembly, Round, Adjustable, Diameter: 4-3/16 Inch, Side Knockouts: (2) 1/2 Inch and (2) 3/4 Inch, Bottom Knockouts: (2) 1/2 Inch and (2) 3/4 Inch, Material: Steel

Category: Recessed Adjustable Floor Boxes

For installing three Ortronics TracJack device modules in 2400 Series Raceway. Does not accept Quad 106 Frame. Ivory

Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: Gray. Outlets (6") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Eight 20A, 120V, 60Hz, 2500 watt outlets, lighted switch, putty white aluminum housing, 6' (1.8m) 12/3 SJT black cord with NEMA5-20 plug. Length 17 1/4" (438mm). Receptacle center-to-center 1 1/2" (38mm). Snap-on slide-off mounting.

Category: General Duty Power Strips

Eight (4 duplex) outlets, nonmetallic housing with ivory finish. 6' (1.8m) cord. Length 48" (1.2m). Receptacle center-to-center 12" (305mm).

Category: Single Circuit Non-Metallic Plugmold

Allows outer compartments to be adapted to accept any of the 68 device plates. One 68DB is required to mount two 68 device plates in each outer compartment.

Category: Poke-Through Mounting Plates