"wiremold"

Steel, Entrance End Fitting, 3000 Series. Size: 2" Height, 2-1/8" Width. Includes: Concentric: 1/2", 3/4" and 1" Trade Size KOs. Ivory.

Category: Small 2-Piece Metallic Raceway End Fittings

Prewired 20A duplex receptacle can be wired as standard duplex or isolated ground. Flanges available painted in gray (GY), black (BK), ivory (VY). Flanges also available in plated brushed brass (BS) and brushed aluminum (AL). Slide covers match the painted flange colors, gray, black, ivory. Aluminum and brass flanges shipped with black slide cover. Brass flange also available with nonmetallic brass colored slide holder (AB). Aluminum flange also available with nonmetallic aluminum color slide holder (AA). Includes Wiremold Open System unloaded inserts. NOTE: Includes two Cat 6 TechChoice discrete keystone connectors, two Ortronics TracJack adapters, and two Wiremold Open System adapters. RC7 Series Poke-Thru Devices require a 3 1/16 (78mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8 minimum. RC7 Black Finish Flange and Black Slide Holder Assembly, 20A Duplex Standard or IG and Cat 6 Connectors

Category: Assembled Poke-Through Units

Steel, Prewired Plugmold, Length: 3 ft. Color: Black. Outlets (6") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Steel Plugmold

Steel, FiberReady 2" Radius Full Capacity Flat Elbow, 4000 Series. Size: 8-3/4" Length, 1-3/4" Width. Ivory.

Category: Large 2-Piece Metallic Raceway Elbows

A full capacity tee fitting for branching raceway at right angles. Provides separation of services and 2" (51mm) cable bend radius for UTP and Fiber Optic installations. Ivory

Category: 2-Piece Non-Metallic Raceway Tee Fittings

Steel, Prewired Plugmold, Length: 5 ft. Color: Ivory. Outlets (12") O/C: Total Outlets: (5) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Steel Plugmold

Male connector with 3/4 inch trade size conduit opening for connecting raceway to conduit boxes or panel boxes that have KOs for conduit. Can also be used with conduit type fittings. When used with 700 Series Raceway, break out crescent twistout in connector.

Category: Metallic Raceway Connectors & Adapters

Brass communication cover plate. Allows for up to four communication devices to be mounted in a recessed position within the 880S and 880CS Floor Boxes. Has removable slides for cable egress. NOTE: Not for use with 817C, 827C, and 837C Flanges.

Category: Recessed Floor Box Service Fittings

DATA BRKT - EXTRON

WMD ECB2SP-RLNK CEILING BOX R

Category: Media Center Enclosures with Covers

Plug-In Outlet Center Unit, Length: 24 Inch, 15' Cord, 8 Outlets, Lighted Switch.

Category: Work Surface Power Centers

For making smooth, accurate bends, saddles and offsets in Wiremold 500 and 700 Series Raceways. Two0piece handle fits in tool box.

Category: Raceway Tools

Closes off open end of 2400D Series Raceway. Fog White.

Category: Small 2-Piece Metallic Raceway End Fittings

Brushed aluminum GFI cover plate, 3.290" x 4.310" (83.6mm x 109.5mm). May be used with Wiremold CM Series adapters and Ortronics Connectivity Systems in conjunction with 817B, 827B, and 837B Flanges. Made in USA. Black

Category: Square / Rectangle Recessed Box Covers

Device plate that will accept up to four (4) ports of communications devices. Includes adapters for Ortronics TracJack, Series II, Pass and Seymour Activate inserts and Wiremold Open System communication modules.

Category: Metallic Overfloor Raceway Device Plates

Duplex Cover Plate with Flip Lid, Size: 4-1/4 Inch, Aluminum

Category: Round Recessed Box Covers

Available in standard width. Provided with bezel to accept up to three (3) dual Wiremold CM Series Open System communication modules or Pass and Seymour Activate Connectivity System inserts. Modules and inserts sold separately.

Category: 1-Gang Raceway Device Brackets & Plates

HDMI Female to Female Barrel, Wiremold Audio/Video Interface Plates (AVIP), Allow For A/V Connectivity in All Wiremold A/V Compatible Pathways. AVIP Series Device Plates are Metal And Have Screwed-Down Connectors, Which Ensure a Secure Connection that Cannot Be Easily Pulled-out or Disconnected While in Use. Available In Data, Audio, And Video Versions, AVIP Series Device Plates Help You Stay Connected in Meeting and Training Rooms, Collaboration Spaces, Or Work Areas.

Category: Snap-In HDMI Jack Inserts

Service Fitting, Type: 4-Piece, Duplex Receptacle 20A/125V on Both Sides, Material: Aluminum, For Use With Wiremold® 525 Series Service Fittings.

Category: Recessed Floor Box Service Fittings

4-Compartment Combination Box, Metallic, Depth: 3-7/16", Length: 12-3/4", Width: 10". Includes: (2) Receptacle Brackets. For use in Concrete Floor Applications. Floor cover is not included with box and needs to be purchased separately.

Category: Recessed Compartment Boxes

Non-Metallic, Device Bracket, 40N2 / 60N2 Series. Size: 5-1/4" Length, 2-3/16" Width. For use with Ortronics TracJack Individual Jack System, Ortronics Series II Front-Loading Module System, and Wiremold Open System Communications Modules. Color: Ivory.

Category: 2-Piece Non-Metallic Raceway Covers

Non-Metallic, 6A, Mini Adapter Bezel Opening. Ivory.

Category: 1-Gang Raceway Box Extension Adapters

Adjustable Floor Box, 1-Gang, Steel, Depth: 2-15/32". Cubic Inches: 37". Knockouts: (5) 1/2" & (5) 3/4". Adjustments: 1-3/4" (Before Pour) or 1/2" (After Pour)

Category: Recessed Adjustable Floor Boxes

Wlk 838tal-880s3 838tal-880s3

Category: Square / Rectangle Recessed Box Flanges