"wiremold"

Two-compartment large capacity pole. Furnished unwired without outlets. Box ended with industry sized knockouts. Standard height 15' 2" (4.6m) (NP800C-15-2B) Finish - Anodized Aluminum

Category: Aluminum Power Poles

For 30TP-2V / 30TC-2V and 30TP-4V / 30TC-4V Series. 12" (305mm) long. Communication covers for additional voice/data connectors. Each cover includes Kos for four RJ11/RJ45 connectors (.760" x .576" (19.3mm x 14.6mm)), mouse hole for exiting communication cables (grommet furnished).

Category: Power Pole Plates

Eight outlets, lighted switch, rugged gray aluminum housing, 15A, 15' (4.6m) 14/3 SJT black cord with NEMA5-15 plug. Length 48" (1.2m). Receptacle center-to-center 5 1/4" (133mm). Snap-on, slide-off mounting.

Category: Single Circuit Aluminum Plugmold

Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly. Insert in lid allows for carpet or tile cutouts to match finished floor. Finish - Brass

Category: Square / Rectangle Recessed Box Covers

Double Duplex Device Plate, For Installing a 15A and 20A Duplex Receptacles or Duplex Style Communication Devices. Accepts 106 Frame.

Category: Large 2-Piece Metallic Raceway Cover Plates

2-Gang, Adjustable Floor Box, Depth: 2-7/16 Inch, Cubic Inches: 76, (6) 1 Inch Conduit Openings, Cast Iron

Category: Square Recessed Floor Boxes

Flangeless cover for use in tile installation. Die-cast aluminum assembly. Insert in lid allows for tile cutouts to match finished floor. Finish - Gray

Category: Square / Rectangle Recessed Box Covers

Small, Round, Anodized Aluminum, 24" Extension With Anodize Panel

Large, Round, Anodized Aluminum, 24" Extension With Anodized Panel

Used for touching up small areas. Contains 0.3 oz. of paint. Designer Ivory

Flanged Cover for Use in Tile or Carpet Installation. Die-Cast Aluminum Assembly, Insert in Lid Allows for Carpet or Tile Cutouts to Match Finished Floor, Aluminum

Category: Square / Rectangle Recessed Box Covers

Steel, Fixture Box with Solid Base, 500 & 700 Series. Size: 5-1/2" Diameter, 1" Depth. Includes: (4) Holes, (4) 1/2" Trade Size KOs. White.

Category: Round Raceway Solid Base Boxes

Use with RC9CMD and RC9AM2TC Series Covers to complete installation. NOTE: RC9AMD and RC9AM2TC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Assembled Poke-Through Units

Eight 20A outlets with t-slots, 6' (1.8m) cord. Length 20" (508mm). Receptacle center-to-center 1 1/4" (32mm). 2- Amp unit with a 20A resettable circuit breaker. Units available with straight blade or Locking Plug.

Category: Work Surface Power Centers

Available in 5' [1.5m] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] aluminum housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings.

Category: Dual Circuit Steel Plugmold

To convert RFB4 Box to an RFB4-4DB Box. NOTE: For RFB4 only. For use on tile, terrazzo, carpet, or wood covered floors. Additional configurations available. Please consult your local Sales Representative for more information.

Category: Recessed Floor Box Service Fittings

PN 10 Series Radiused External Elbow. For right angle turns around external corners. Finish - White

Category: 1-Piece Non-Metallic Raceway Elbows

Blank Plate, Length: 12 Inch, Width: 4 7/8 Inch, Aluminum; Satin Anodized; Approval UL, CUL. Used On AL5200 Series Aluminum Raceway

Category: Large 2-Piece Metallic Raceway Cover Plates

5-1/2" Round Cover, Metallic, Cover Type: 2-5/8" Opening (w/o Abandon Plug), Device Type: Communication or Power. Material: Brass. For use in Carpet, Wood, Laminate, or Tile Flooring.

Category: Round Recessed Box Covers

Single-gang device plate that accepts standard 20A duplex receptacle or a duplex Turnlok receptacle. Fits in any one (1) of the shaded locations shown. Devices supplied by others.

Category: Recessed Floor Box Service Fittings

Steel, Plugmold Multioutlet Strip, 2400PM Series, Single-Channel, 5 Duplex Receptacle, Size: 5' Length, GBA Finish, Color: Ivory.

Category: Dual Circuit Steel Plugmold

Flush Style Floor Box Cover Assembly with Insert, Tamper-Resistant, Material/Finish: Die Cast Aluminum/Bronze

Category: Square / Rectangle Recessed Box Covers

Use with RC3C Series Covers to complete installation. NOTE: RC3 Series Poke-Thru Devices require a 4" (102mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Assembled Poke-Through Units

Surface mount box for use with Eclipse Raceway or standalone application. Has two 1/2" trade size KOs. Accepts four front-loaded downward facing Ortronics TracJack inserts.

Category: 2-Gang Raceway Device Boxes