"wiremold"

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Flush, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat.

Category: Poke-Through Cover Assemblies

For hanging fixtures, smoke/fire alarms and other security devices with 3 1/2" (89mm) or 4 1/16" (103mm) mounting centers. 5 1/2" (140mm) diameter with open base. Not for use with fans. White

Category: Round Raceway Extension Boxes

Flangeless cover for use in tile installation. Die-cast aluminum assembly. Insert in lid allows for tile cutouts to match finished floor. Finish - Gray

Category: Square / Rectangle Recessed Box Covers

Quad 15A receptacle included for standard or isolated ground wiring. Unit complete with link straps, adapter plate and receptacle bracket to attach preset or afterset. Anodized Aluminum

Category: Round Recessed Box Covers

Raceway Back Feed Fitting, 2400 Series, Steel, White, 1/2" Trade Size Male Bushing and Lock Nut Washer for Grounding

Category: Small 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Use with RC9CMD and RC9AM2TC Series Covers to complete installation. NOTE: RC9AMD and RC9AM2TC Series Poke-Thru Devices require a 3" (76mm) diameter hole. Not designed to work with bare concrete or terrazzo. Floor covering thickness 1/8" minimum.

Category: Assembled Poke-Through Units

Eight 20A outlets with t-slots, 6' (1.8m) cord. Length 20" (508mm). Receptacle center-to-center 1 1/4" (32mm). 2- Amp unit with a 20A resettable circuit breaker. Units available with straight blade or Locking Plug.

Category: Work Surface Power Centers

Available in 5' [1.5m] length with 12" spacing. USB is 2.4 Amps (shared between two ports) 5VDC. .040" [1.0mm] aluminum housing. Packed two per carton. Each unit supplied with one (1) Coupling and two (2) Blank End Fittings.

Category: Dual Circuit Steel Plugmold

To convert RFB4 Box to an RFB4-4DB Box. NOTE: For RFB4 only. For use on tile, terrazzo, carpet, or wood covered floors. Additional configurations available. Please consult your local Sales Representative for more information.

Category: Recessed Floor Box Service Fittings

PN 10 Series Radiused External Elbow. For right angle turns around external corners. Finish - White

Category: 1-Piece Non-Metallic Raceway Elbows

Blank Plate, Length: 12 Inch, Width: 4 7/8 Inch, Aluminum; Satin Anodized; Approval UL, CUL. Used On AL5200 Series Aluminum Raceway

Category: Large 2-Piece Metallic Raceway Cover Plates

Two-gang device plate that will accept up to four (4) Extron Electronics AAP style plates. This device plate takes up two of the three gangs in the center compartment. Devices supplied by others.

Category: Poke-Through Mounting Plates

Floor Box Assembly, Round, Type: 15 Amp Quad Receptacle, Diameter: 4 Inch, (3) 1/2 Inch Knockouts, Material/Finish: Aluminum/Gray, For Use in Raised Floor or Wood Floor Applications.

Category: Assembled Recessed Round Boxes

Flat Tee with Coupling, For Branch Connections of Two Runs of ALA4800 Series Raceway. Size/Dimensions: 9 Inches, Material: Aluminum, Includes Six ALA01 Couplings.

Category: Large 2-Piece Metallic Raceway Tee Fittings

Steel, Prewired Plugmold, Tamper-Resistant, Length: 3 ft. Color: Gray. Outlets (6") O/C: Total Outlets: (6) 15A, 125V: Single Circuit, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

Steel, Prewired Plugmold, Tamper-Resistant, Length: 5 ft. Color: Gray. Outlets (6") O/C: Total Outlets: (9) 15A, 125V: Single Circuit, (1) 2-Port 2.4 USB, 5V DC, Single Outlets.

Category: Single Circuit Tamper Proof Plugmold

For right angle turns around external corners. Integral dividers provide 2" (51mm) cable bend radius for UTP and Fiber Optic installations. Use the 5418FO for radiused alternative to 5418.

Category: 2-Piece Non-Metallic Raceway Elbows

For 90 degree tee connection at any point along a run of 6000 Series Raceway. Finish - Ivory

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

8" Round Cover Assembly, Evolution Series, Metallic, Cover Type: Tamper-Resistant Flush, Material/Finish: Die-Cast Aluminum/Gray Powder-Coat.

Category: Poke-Through Cover Assemblies

<p>Dual-service fitting includes housing, base, two mounting frames, divider, and mounting hardware. For use on one No. 2 and one No. 4 Duct. Has 1/2'' and 3/4'' trade size conduit knockouts on each end. 104.3 cu. in. (1709cm3) capacity.</p>

Category: Recessed Floor Box Service Fittings

Prewired snap-in 20A receptacle can be wired as standard duplex or isolated ground. Available only in black. See installation instructions with replacement receptacle for complete installation details.

Category: Recessed Floor Box Service Fittings

Nonmetallic Plugmold 5' in length with receptacles spaced 30" on center. Nonmetallic Plugmold has a textured ivory finish. For use with 20 amp circuit. Finish - Ivory

Category: Single Circuit Non-Metallic Plugmold

Non-Metallic, Prewired Plugmold, Length: 6 ft. Color: Ivory. Outlets (12") O/C: Total Outlets: (6) 15A, 125V: 2-Circuit, Duplex Outlets.

Category: Single Circuit Non-Metallic Plugmold

Prewired snap-in 20A receptacle can be wired as standard duplexor isolated ground. Available only in black. See installation instructions with replacement receptacle for complete installation details.

Category: Assembled Poke-Through Units