"the thomas"

Wire Marker Cards - Vinyl Cloth, Solid Machine Tool Markers, 1-1/2 inch, Legend 2T2. Package of 25 Cards.

Category: Wire Marker Cards

PMAFIX Straight Black Connector with Metric Threads, Connector Material - Polyamide 6, Thread Material - Nickel Plated Brass, Thread Size - M32x1.5, Thread Length - 13, Conduit Size NW - 29

Category: Straight Non-Metallic Liquidtight Flex Connectors

THB OD581 COMP TOOL 5/8 DIE S

Category: Wire Crimping Tools

Crimp Tool for Shield-kon Outer Sleeve GSC Connectors Up To .348 I.D. And Insulated Outer Sleeve GSR Connectors Up To .297 I.D., Length 8 inches, weight without dies 1 pound.

Category: Wire Crimping Tools

3-1/2IN STAMPED STEEL CVR

Category: PVC Coated Conduit Body Covers

The S801S-K10 is a 1-pole High Performance Circuit breaker with K-Characteristic, with cage terminal and a rated current of 10 A. It is a current limiting device with a maximum breaking capacity of 50kA at 240/415V. It can be used for voltages up to 400/690V and in DC as well. It has two different tripping mechanisms, the thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. The S801S-K10 complies with IEC/EN 60898-1 and IEC/EN 60947-2 and allows the use for residential, commercial and industrial applications. It has numerous of approvals, therefore it can be used worldwide. The extensive range of accessory makes the use of S801S-K10 more comfortable. Due to the fast arc extinction of S801S-K10 your application will be secured.

Category: 1-Pole DIN Rail Mount Circuit Breakers

The next generation in our 10Gig Termination System combines two crimpers into a single tool, making 2-step crimping simple. First, insert the 10Gig connector into the front end to terminate the contacts and switch to the back end to crimp the external ground. Like the original, the new Tele-TitanXg 2.0, along with our 10Gig shielded connectors, are engineered specifically for CAT6A cables to provide true 10Gig performance each and every time., 849160007975

Category: Datacom Crimp Tools

Plasti-Bond Sealing Fittings are used in conduit runs to stop gasses, vapors or flames from migrating from one part of the conduit system to another. This limits the spread of any potential explosion, enhancing safety. The PVC and urethane coatings of the fittings protects them from corrosive atmospheres so they can continue to function in hazardous locations. These fittings are available in several different configurations and with optional breathers and drains to accommodate installation in a variety of locations and positions. The EY, EYM, EYD and EYDEF styles of fittings are for installation in vertical conduit runs. The EYA, EYAM and EYSEF style fittings are for installation in either vertical or horizontal runs. The EZS and EZDM style fittings may be used in any angle of conduit run. These Plasti-Bond sealing fittings should be used with a suitable system of sealing compound, such as Chico A, Chico X or Chico A-P from Crouse-Hinds. Follow the installation instructions included with the sealing compound.

Category: PVC Coated Type EYD Sealing Fittings

3-1/2" Diameter, Old Work Ceiling/Fixture Box, Phenolic, Depth: 2-1/8. Cubic Inches: 14". Includes: High Clamps. New Fire Rating. Carlon phenolic boxes can be installed in the same stud cavity of a shared two-hour wall. They may also face opposite directions with only a 3" horizontal separation.

Category: Round Non-Metallic Old Work Ceiling / Fixture Boxes

3-1/2" Diameter, Ceiling/Fixture Pan, Phenolic, Depth: 5/8". Cubic Inches: 3.5". New Fire Rating. Carlon phenolic boxes can be installed in the same stud cavity of a shared two-hour wall. They may also face opposite directions with only a 3" horizontal separation.

Category: Round Non-Metallic Ceiling Pans

4" Diameter, Nail-On, Ceiling/Fixture Box with "N" Bracket, Phenolic, Depth: 1-5/8", Cubic Inches: 13.5", Includes: Nails, Clamps, New Fire Rating, Carlon Phenolic Boxes Can Be Installed in the Same Stud Cavity of a Shared Two-Hour Wall, They May Also Face Opposite Directions with Only a 3" Horizontal Separation

Category: Round Non-Metallic New Work Ceiling / Fixture Boxes

3-1/2" Diameter, Old Work Ceiling/Fixture Box with Brackets, Phenolic, Depth: 2-1/8". Cubic Inches: 14", Fixture Weight: 15 lbs. Includes: #9 Snap-In Bracket, High Clamps, #40 Ground Strap, New Fire Rating, Carlon Phenolic Boxes Can be Installed in the Same Stud Cavity of a Shared Two-Hour Wall, They May Also Face Opposite Directions with Only a 3" Horizontal Separation

Category: Round Non-Metallic Old Work Ceiling / Fixture Boxes

THB AHF612LHB9024 H BEAM 12 INCH VERTICAL OUTSIDE 90 24 INCH RADIUS ALUMINUM

Category: 90° Horizontal Cable Tray Bend

ALUMINUM 6 INCH SIDE RAIL HEIGHT 36 INCH WIDTH CLOSURE END PLATE

Category: Cable Tray Mounting Hardware

Clamp, PC Beam, Outer Diameter of Conduit or Pipe 4.000 Inches, Nominal Conduit Size 3-1/2 Inches, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: Malleable Iron EMT Parallel Type K-Clamps

Clamp, PC Beam, Outer Diameter of Conduit or Pipe 3.500 Inches, Nominal Conduit Size 3 Inches, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: Malleable Iron EMT Parallel Type K-Clamps

AL.36INWX6IND HT 12INRAD

Category: Cable Tray Horizontal Tees

THB AHF518LVI9012 ALUM 90 DEG

Category: 90° Vertical Inside Cable Tray Bend

The Ta75Du-25 Thermal Overload Relay Is An Economic Electromechanical Protection Device For The Main Circuit. It Offers Reliable And Fast Protection For Motors In The Event Of Overload Or Phase Failure. The Device Has Trip Class 10A. Further Features Are The Temperature Compensation, Trip Contact (Nc), Signal Contact (No), Automatic- Or Manual Reset Selectable, Trip-Free Mechanism, Stop- And Test Function And A Trip Indication. The Overload Relays Are Connected Directly To The Block Contactors. Single Mounting Kits Are Available As Accessory.

Category: Overload Relays - Thermal Type

IEC Contactors & Starters. Type 2 Coordination. C-2000 Starters. Maximum Amps: 5.5 - 8.5. Type LPJ-SP or AJT Maximum Fuse: 12. C-2000 contactors and starters have been tested and certified to meet IEC 947.4 Type 2 coordination when protected with the type ôJö fuses. ôType 2 coordination requires that, under short-circuit conditions, the contactor or starter shall cause no danger to persons or installation and shall be suitable for further use. The risk of contact welding is recognized, in which case the manufacturer shall indicate the measures to be taken as regards the maintenance of the equipment.ö (IEC 947.4).

Category: Overload Relays - Thermal Type

IEC Contactors & Starters. Type 2 Coordination. C-2000 Starters. Maximum Amps: 30 - 43. Type LPJ-SP or AJT Maximum Fuse: 70. C-2000 contactors and starters have been tested and certified to meet IEC 947.4 Type 2 coordination when protected with the type ôJö fuses. ôType 2 coordination requires that, under short-circuit conditions, the contactor or starter shall cause no danger to persons or installation and shall be suitable for further use. The risk of contact welding is recognized, in which case the manufacturer shall indicate the measures to be taken as regards the maintenance of the equipment.ö (IEC 947.4).

Category: Overload Relays - Thermal Type

Filler Panel Kit, Used When Mounting The ProLine G2 Heavy-Duty Swing-Out Rack Frames In 800-mm Wide Frames, The Filler Panel Occupies The Extra Space Between The Frame And The Swing Frame, Includes A Handle And All The Hardware For Mounting To The Swing-Out Rack Frame

Category: Panelboard Filler Plates

Easy-Splice H Tap Gel Splice Cover for 6 - 2 AWG The Easy-Splice low-voltage H-Frame closure insulates and seals low-voltage cable-taps and splices made with H-frame compression connectors. The closure utilizes sealing gel material to seal and protect the connection from moisture ingress, corrosion and pollution. To install, simply place the connection on the closure and press the closure together. The low-voltage H-frame closure is ideal for both underground and overhead applications and is especially useful for street lighting applications. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C, 1,000 volts, UV resistant. The Easy-Splice H tap gel splice covers do NOT include connector. Approved Connectors: Blackburn WR9 Burndy YPC2A8U Homac UB214 NSi Industries WR9 T&B 63105

Category: Low Voltage Gel Filled Splice Kits

The MT-13 Telescoping 13 ft MultiLadder is versatile and easy to transport. The telescoping design allows the ladder to be used in 4 different positions -- twin stepladder, stairway stepladder, extension ladder and as 2 scaffold bases. In the stepladder mode, the multiladder can be used for one or two person jobs with a duty rating of 300 pounds per side. The feet are slip resistant and the ends of the ladder are flared for firm support. Smooth curved rails allow for comfortable climbing. With its many uses, this ladder may fit all your climbing needs.

Category: 300 Pound Rated Stepladders