"the thomas"

Reinforcement bracket, for TS, SE, TP universal console, material: Sheet steel, surface: Zinc-plated, supply includes: Assembly parts, description: For use as an additional stabiliser to the clamping straps when populated enclosures are screw-fastened via the base tray to the base/plinth or pallet for transportation purposes. Packaging Unit: 4 pc(s).

Category: Enclosure Mounting Bracket Kits

Terminal boxes JB, Stainless steel, material: Cover: Stainless steel 1.4301 (AISI 304), all-round foamed-in PU seal, Enclosure: Stainless steel 1.4301 (AISI 304), surface: Enclosure and door: Brushed, grain 240, supply includes: 180¦ hinge, description: The JB enclosure offers protection for dense wiring and sensitive small instruments. These hinged cover junction boxes combine the advantages of the AE and KL series at an economical cost. Features include 180 degree hinge and slotted insert quarter turn latch. Foamed-in-place gasket and a knife-edge perimeter add extra protection.

Category: Stainless Steel Continuous Hinge Cover Junction Boxes

Snap-on nut TS, material: Precision-cast stainless steel, description: For mounting on the vertical TS/SE enclosure section. By tightening the screw, it is securely tightened against the section, and potential equalisation is automatically created. Packaging Unit: 20 pc(s).

Category: Rack Mounting Screws

Rare-Earth Magnetic Plates Hold Hand Tools, Sockets, Bits and Small Parts, Strong Enough to Hold Lineman's Pliers, Made With Impact Resistant Nylon to Stand Up to Tough Working Conditions, Robust Latches On Each Bucket Work Center Module Can Be Handled With Class 2 Insulated Gloves to Effortlessly Reorganize the Rail System to Help Improve Workspace Efficiency, The Bucket Work Center is an Ecosystem That Will Revamp the Way a Lineman Works Lineman Can Transform Their Workspace With the Bucket Work Center Modules to Become the Lineman's Office, Similar to How Other Professionals Customize Their Office Space, Multiple Rails on the Bucket Work Center Wall Assembly Allow Horizontal and Vertical Customization of Module Positioning, The Wall Assembly Rail System is Available in 3 Sizes to Accommodate the Standard 1-Man, 1.5 Man, or 2 Man Buckets (Cat. Nos. BC100WA, BC150WA, BC200WA Sold Separately)

Category: Components Kits

The S801S-K10 is a 1-pole High Performance Circuit breaker with K-Characteristic, with cage terminal and a rated current of 10 A. It is a current limiting device with a maximum breaking capacity of 50kA at 240/415V. It can be used for voltages up to 400/690V and in DC as well. It has two different tripping mechanisms, the thermal tripping mechanism for overload protection and the electromechanic tripping mechanism for short circuit protection. The S801S-K10 complies with IEC/EN 60898-1 and IEC/EN 60947-2 and allows the use for residential, commercial and industrial applications. It has numerous of approvals, therefore it can be used worldwide. The extensive range of accessory makes the use of S801S-K10 more comfortable. Due to the fast arc extinction of S801S-K10 your application will be secured.

Category: 1-Pole DIN Rail Mount Circuit Breakers

RED EXFU-5 1-1/2" F/F

3-1/2" Diameter, Ceiling/Fixture Box with Bar Hanger, Phenolic, Depth: 2-1/8". Cubic Inches: 13.5", Fixture Weight: 50 lbs. Adjustable Bracket Length: 16-1/2" - 27", Includes: High Clamps and Ground Strap, New Fire Rating, Carlon Phenolic Boxes Can Be Installed in the Same Stud Cavity of a Shared Two-Hour Wall, They May Also Face Opposite Directions with Only a 3" Horizontal Separation

Category: Non-Metallic Adjustable Ceiling / Fixture Boxes

1POLE INLINE FUSEHOLDER WITH CRIMP TERMI. The Littelfuse 600 V in-line watertight fuse holders are the ideal answer for all high humidity and corrosive environments where fuses are required. Available in both breakaway and non-breakaway, single and double pole versions, these fuse holders allow maximum flexibility for any application. Applications: Street, alley, and parking lot lighting. Security and perimeter lighting. Traffic signals. Outdoor illuminated signs. Sports lighting. Boat electrical circuits. Tractors and yard equipment. General outdoor circuit protection. Benefits: Safety-Permits individual fixture or device to be disconnected from circuit for servicing. Eliminates possibility of shock. Individual fixture fusing-Prevents loss of one fixture through accident, vandalism, or end of life from darkening the entire circuit. Simplifies maintenance- Being able to immediately identify the one faulted fixture eliminates testing the entire circuit, speeds repair and permits servicing the individual unit while the rest of the circuit is functioning. Reduces damage from fault-Can prevent faulted ballast or other failure from severely damaging fixture or device, reducing necessary repair or need of replacement. Features: Watertight-Internal O-ring provides watertight seal. Superior terminal seeds-Ultrasonically-welded terminals provide maximum strength and eliminate leaking at terminals. Break-Resistant- Fiberglass ûreinforced polymer body resists damage from dropping or impact much better than phenolic look-alikes. Flexible terminations-Accommodates a wide range of stranded or solid copper conductors, with either crimp or screw terminals. One-pole and two-pole models- available to accommodate all system voltages up to 600v.

Category: In-Line Fuse Holders

GE's circuit breaker enclosures are UL Listed, CSA Certified and are suitable for use as service equipment (except as noted). The short circuit rating of the enclosure/circuit breaker combination is equal to the short circuit rating of the installed circuit breaker. Frame notes and/or restrictions Enclosure can also be used with TJD. Enclosure notes and/or limitation Suitable for parallel 250 kcmil cable maximum (use 600 amp enclosure if larger cable is required). ACCESSORIES Neutral Kit (non-GF applications) TNIA400 GE's circuit breaker enclosures are UL Listed, CSA Certified and are suitable for use as service equipment (except as noted). The short circuit rating of the enclosure/circuit breaker combination is equal to the short circuit rating of the installed circuit breaker. Frame notes and/or restrictions, Enclosure can also be used with TJD. Enclosure notes and/or limitation: Suitable for parallel 250 kcmil cable maximum (use 600 amp enclosure if larger cable is required). Enclosure does not include nockouts (NEMA Type12). ACCESSORIES:Neutral Kit (non-GF applications):TNIA400

Category: Molded Case Circuit Breaker Enclosures

4" Diameter, Nail-On, Ceiling/Fixture Box with "N" Bracket, Phenolic, Depth: 1-5/8", Cubic Inches: 13.5", Includes: Nails, Clamps, New Fire Rating, Carlon Phenolic Boxes Can Be Installed in the Same Stud Cavity of a Shared Two-Hour Wall, They May Also Face Opposite Directions with Only a 3" Horizontal Separation

Category: Round Non-Metallic New Work Ceiling / Fixture Boxes

3-1/2" Diameter, Old Work Ceiling/Fixture Box with Brackets, Phenolic, Depth: 2-1/8". Cubic Inches: 14", Fixture Weight: 15 lbs. Includes: #9 Snap-In Bracket, High Clamps, #40 Ground Strap, New Fire Rating, Carlon Phenolic Boxes Can be Installed in the Same Stud Cavity of a Shared Two-Hour Wall, They May Also Face Opposite Directions with Only a 3" Horizontal Separation

Category: Round Non-Metallic Old Work Ceiling / Fixture Boxes

THB AHF612LHB9024 H BEAM 12 INCH VERTICAL OUTSIDE 90 24 INCH RADIUS ALUMINUM

Category: 90° Horizontal Cable Tray Bend

Clamp, PC Beam, Outer Diameter of Conduit or Pipe 4.000 Inches, Nominal Conduit Size 3-1/2 Inches, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: Malleable Iron EMT Parallel Type K-Clamps

Clamp, PC Beam, Outer Diameter of Conduit or Pipe 3.500 Inches, Nominal Conduit Size 3 Inches, Malleable Iron, For Mounting Pipe or Conduit Parallel to the Beam

Category: Malleable Iron EMT Parallel Type K-Clamps

AL.36INWX6IND HT 12INRAD

Category: Cable Tray Horizontal Tees

THB AHF518LVI9012 ALUM 90 DEG

Category: 90° Vertical Inside Cable Tray Bend

ALUMINUM 6 INCH SIDE RAIL HEIGHT 36 INCH WIDTH CLOSURE END PLATE

Category: Cable Tray Mounting Hardware

THB AHF518LVO9012

Category: 90° Vertical Outside Tray Bend

THB AHF624LHB9024 H BEAM 24 INCH90 DEG 24 INCH RADIUS ALUMINUM

Category: 90° Horizontal Cable Tray Bend

Start building tomorrow’s test tool system today with the Fluke 3000 FC Digital Multimeter. The new Fluke Connect system of test tools communicates with the new Fluke Connect mobile application on your Android™ or iOS smart device, allowing you to share live measurements, monitor readings from safe distances, and get your job done easier than ever before. The wireless digital multimeter functions as the mobile hub, displaying readings from up to three module tools simultaneously from up to 20 m away. The Fluke Connect modules also give you the flexibility to build your wireless test tool system how you want when you want. Fluke a3000 FC Kit includes multimeter, ac current clamp module and accessories.

Category: AC Clamp Meters

Easy-Splice H Tap Gel Splice Cover for 6 - 2 AWG The Easy-Splice low-voltage H-Frame closure insulates and seals low-voltage cable-taps and splices made with H-frame compression connectors. The closure utilizes sealing gel material to seal and protect the connection from moisture ingress, corrosion and pollution. To install, simply place the connection on the closure and press the closure together. The low-voltage H-frame closure is ideal for both underground and overhead applications and is especially useful for street lighting applications. Qualified to ANSI C119.1-1986 for underground splicing. Rated -40 degrees C to 90 degrees C, 1,000 volts, UV resistant. The Easy-Splice H tap gel splice covers do NOT include connector. Approved Connectors: Blackburn WR9 Burndy YPC2A8U Homac UB214 NSi Industries WR9 T&B 63105

Category: Low Voltage Gel Filled Splice Kits

The MT-13 Telescoping 13 ft MultiLadder is versatile and easy to transport. The telescoping design allows the ladder to be used in 4 different positions -- twin stepladder, stairway stepladder, extension ladder and as 2 scaffold bases. In the stepladder mode, the multiladder can be used for one or two person jobs with a duty rating of 300 pounds per side. The feet are slip resistant and the ends of the ladder are flared for firm support. Smooth curved rails allow for comfortable climbing. With its many uses, this ladder may fit all your climbing needs.

Category: 300 Pound Rated Stepladders

Long Impact Auger Wood Bit 11/16" x 30". Patented cutting edge for fast easy drilling of clean holes, especially in salt treated utility poles. Made from hardened alloy steel for added toughness. The self-feeding threaded screw point draws the bit completely through the wood - no need to push the bit while drilling. Over center flute for evacuating chips. Shaft is straightened for fewer vibrations to the hand and to help control the quality of the hole. Cutting edge can be re-sharpened multiple times and continues to self feed. 7/16" Hex Shank with easy to fit quick change groove for Impact Drivers.

Category: Knockout Punches

The ta25du-4.0 thermal overload relay is an economic electromechanical protection device for the main circuit. it offers reliable and fast protection for motors in the event of overload or phase failure. The device has trip class 10a. further features are the temperature compensation, trip contact (nc), signal contact (no), automatic- or manUAl reset selectable, trip-free mechanism, stop- and test function and a trip indication. The overload relays are connected directly to the block contactors. single mounting kits are available as accessory.

Category: Overload Relays - Thermal Type