"wiremold"

2-Gang, Cover Plate Flange, Metallic, Color: Bronze. WxL: 7.624" x 4.524". For use on: 880S2, 880M2, 880CS2-1, 880CM2-1 Floor Boxes in Tile Applications.

Category: Square / Rectangle Recessed Box Flanges

AL2400 Series grounding conductor to provide an additional ground to raceway.

Category: Small 2-Piece Metallic Raceway Grounding Clamps

Cover for Poke Thru Device, Series: RC9, RC3, and AV3 Poke Thru Assemblies, Flush, Flange: Aluminum, Non-Metallic Cover, Color: Aluminum, For Tile and Carpet Flooring.

Category: Poke-Through Cover Assemblies

For right angle turns on same surface. Maintains 1 1/4" (32mm) bend radius when installing UTP and fiber optic cable. White

Category: 1-Piece Non-Metallic Raceway Elbows

6' Steel Plugmold Multioutlet Strip with 6 duplex receptacles spaced at 12", GBA Finish - Ivory

Category: Dual Circuit Steel Plugmold

6' Plugmold Multioutlet System with 8 single outlets 9 inches apart, GB Finish - Gray

Category: Single Circuit Steel Plugmold

Flangeless Cut-Out Cover Assembly, For Use In Tile Applications, Material: Die Cast Aluminum, Color: Bronze

Category: Square / Rectangle Recessed Box Covers

5' Plugmold Plus Multioutlet Strip comprised of five 12 inches apart, GBA Finish - Ivory

Category: Single Circuit Tamper Proof Plugmold

Twelve outlets, 15' [4.6m] cord. Length 77" [2m]. Receptacle center-to-center 6" [152mm]. 15 Amp unit with a 15A resettable circuit breaker.

Category: Commercial Grade Power Strips

Service Fitting, 20A, Single U-Slot, Three Wire Grounded, Brass

Category: Recessed Floor Box Service Fittings

WMD DQFF15UBK DQF FIELD WIRED

Category: Assembled Recessed Countertop Boxes

For covering joint where two pieces of PN05 Series Raceway come together.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Two duplex KOs. For AC8840 and AC8104 Boxes. NOTE: AC8840 is a single-service box. Power plates cannot be used in conjunction with communication plates.

Category: Communication Module End Plates For Metallic Raceway

Wire Clip, Holds Conductors in Place in AL2400 Raceway Base, Plastic.

Category: Metallic Raceway Connectors & Adapters

Non-Metallic, 1-1/4" Bend Radius Internal Elbow, 2900 Series. Size: 3-1/4" Length, 2-1/2" Width. PVC, White.

Category: 1-Piece Non-Metallic Raceway Elbows

Non-Metallic, Flexible Corduct. 1600 Series. Size: 25' Length, 3-11/32" Width, 30/32" Height. Color: Black.

Category: Non-Metallic Overfloor Raceway

For right angle turns around external corners. Finish - White

Category: 2-Piece Non-Metallic Raceway Elbows

Four concentric 1/2" and 3/4" trade size KOs. Ivory

Category: Large 2-Piece Metallic Raceway Clips, Connectors, & Couplings

Two-compartment pole (one power, one communication with cross over below power devices). Nominal material thickness .040" (1.0mm). Length 12'5" (3.8m). Two 20A 125V duplex receptacles. One Ortronics Series II adapter. One Ortronics Series II dual Cat 5e insert, two blank inserts and labeling supplies. Maximum ceiling height 10'5" (3.2m).

Category: Steel Power Poles

Steel, Cover, DS4000 Series. Size: 5' Length, .040" Thickness. Fog White.

Category: Large 2-Piece Metallic Raceway Covers

Cover Plate, Powder-Coated Aluminum, 3/4" Plugs, Color: Bronze

Category: Square / Rectangle Recessed Box Covers

2" IPS Afterset insert - 3" Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

Poke-Thru, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Black

Category: Poke-Through Cover Assemblies

Steel, FiberReady 2" Radius Full Capacity Internal Elbow, 4000 Series. Size: 3-3/4" Length, 2-1/4" Width. Gray.

Category: Large 2-Piece Metallic Raceway Elbows