"wiremold"

Reducing Connector Fitting, For Transitioning From 800 Series Raceway To 400 Series Raceway. White

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Plastic clips on back of bracket provide cable storage loop. For use with WPACR. Activate 2A jacks snap directly into bracket.

Category: Recessed Floor Box Service Fittings

5' Plugmold Plus Multioutlet Strip comprised of five 12 inch parts, GBA Finish - Ivory

Category: Single Circuit Non-Metallic Plugmold

Twelve outlets, 6' (1.8m) cord. Length 77" (2m). Receptacle center-to-center 6" (152mm). 15 Amp unit with a 15A resettable circuit breaker.

Category: Commercial Grade Power Strips

Divided Tee fitting. For new lau-in or pull-through installations. Includes two pairs of DS4001 Couplings.

Category: Large 2-Piece Metallic Raceway Tee Fittings

Used for floor coverings greater than 1/4" (6.35mm). Use one spacer for 3/8" (9.53mm) thick tile. Use two spacers for 1/2" (12.70mm)

Category: Square / Rectangle Recessed Box Covers

Non-Metallic, 1-Gang, Extra Deep Device Box, NM2000 Series. Size: 4-3/4" Length, 3" Width, 2-3/4" Depth. PVC, Fog White.

Category: Plugmold Device Boxes

For covering joint where two pieces of PN03 Series Raceway come together.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

2" IPS locking nipple for 525 and Multiplex Series fittings. 1 1/2" long. Finish - Anodized Aluminum

Category: Recessed Floor Box Service Fittings

For 25DTP and 25DTC Series. Communications Covers for Ortronics Series II modular connectivity solutions (adapter installed).

Category: Power Pole Plates

Steel, Blank Cover, 500, 700 Series. Size: 2-3/8" Diameter, 1/4" Width. Includes: 1/2" Trade Size KO in Center. Ivory.

Category: Round Raceway 3/0 Outlet Boxes & Covers

5-1/2" Round Cover, Metallic, Cover Type: Single Service (1" Opening). Device Type: Single Receptacle or Data Port. Color: Brass. For use in Carpet Applications.

Category: Round Recessed Box Covers

Add power receptacles or devices to existing modular Tele-Power Poles. Includes receptacle mounting bracket. Anodized Aluminum. 1" x 2 1/4" x 28" (25mm x 57mm x 711mm)

Category: Power Pole Covers

For installing a duplex style device and one modular furniture adapter for communications.

Category: Large 2-Piece Metallic Raceway Cover Plates

Poke-Thru, Tamper-Resistant, Flush Style Cover Assembly, Diameter: 7-1/4 Inch Round, Black

Category: Poke-Through Cover Assemblies

Closes off open end of S4000 Base. Use where one end feed is required in an undivided installation. Includes one 1/2" - 3/4" trade size KO and two No. 10-32 ground terminals.

Category: Large 2-Piece Metallic Raceway End Fittings

ModPower End Unit, In Surface, Connect Up To Six Of Our Power Units Together To Create A System Of Power For Training Spaces, Workstations Or Flexible Spaces, (3) Straight Blade Tamper-Resistant Receptacles & (2) USB Ports (1 USB-A, 1 USB-C), 3 Ft. Cord Length, Magnesium

Category: Commercial Grade Power Strips

Accepts six Ortronics TracJack inserts. Finish - Ivory

Category: 1-Gang Raceway Box Extension Adapters

Recessed Unwired Surface Style Poke-Thru Assembly, Diameter: 8", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

Non-Metallic, Internal Elbow, 2800 Series. Size: 1-1/2" Length. PVC, Fog White.

Category: 1-Piece Non-Metallic Raceway Elbows

Eight 20A outlets with t-slots. 15' (406m) cord. Length 20" (55-8mm). Computer grade surge protection, 20 Amps.

Category: Work Surface Power Centers

Recessed Prewired A/V Flush Style Poke-Thru Assembly, Diameter: 6", Depth: 16-1/4, Bronze

Category: Assembled Poke-Through Units

Floor Box, Raised 2-1/2", Size: 9-1/8" x 11", Accomodates (2) Duplex Receptacles and (6) Communication Devices,

Category: Assembled Recessed Gang Boxes

For mounting two AMP NETCONNECT SL Series devices. Ivory

Category: Keystone Modules For Metallic Raceway