Search results

Single Gang Drop in Floor Box without Hole Saw, 11.8 Cubic Inches, 2.25 Inch Diameter, Depth 7.02 Inches, Cover Brass, Non-Metallic, with Pre-Wired Single Receptacle, Low Voltage Telephone/Cable Plate and 1-Blank Plate for Custom Installations

Category: Assembled Recessed Round Boxes

Catamount Cable Tie Mounting Base, Adhesive Mount, .14 IN W Tie, Nylon/Polyamide 6.6, Natural

Category: Cable Tie Bases

1-1/4 Inch Pipe Strap, Aluminum, for Use with Rigid/IMC Conduit

Category: Aluminum 1-Hole Conduit Straps

Strain Relief Straight Liquidtight Cord Connector, 3/4 IN Trade, 1/8-3/8 IN Openings, Steel, Zinc Plated

Category: Straight Steel Cord Grips

Wide Slot Wiring Duct, 1-1/2" W x 4" D x 6' L, PVC, Gray, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT ***Item does not include Cover***

Category: High Density Wire Duct

Conduit Hub, 3 Inch, Insulated, Gasketed, Watertight, Aluminum, For Use With Rigid/IMC Conduit

Category: Aluminum Conduit Hubs

Compression Lug, Straight, 1-Hole Mount, Standard Barrel, 2/0 AWG, 5/16 Inch Bolt Hole, Copper/Tin Plated, 50 Each Per Box

Category: Non-Insulated Ring Tongues

Bulkhead Fitting, 1/2 Inch, Insulated Throat, Nitrile Sealing Ring, Zinc, For Use With Rigid/IMC Conduit

Category: Die Cast Through-Bulkhead Conduit Hub Fittings

Female Disconnect, Vinyl Insualted, 22 - 16 AWG, 0.250 x 0.032 Inch, Brazed Seam Barrel, Brass With Copper Sleeve, Red, Package of 50 Each

Category: Female Vinyl Insulated Wire Disconnects

EMT Compression Connector, Insulated, 1/2 Inch Diameter, Steel With Zinc Finish, For USe With EMT Conduit

Category: Steel Concrete Tight EMT Compression Connectors

Locktite Mechanical Connector, 4 To 1 AWG Copper, 1/2 IN Stud, 1 Bolt Hole, Copper

Category: 1-Conductor Copper Mechanical Lugs

Large Brazed Seam Ring Terminal, Length 1.32 Inches, Width .60 Inches, Bolt Hole 3/8 Inch, Wire Range #6 AWG, Copper, Tin Plated. Pack size: 20

Category: Non-Insulated Ring Tongues

Female Disconnect, Vinyl Insulated, 12 - 10 AWG, .25 Inch x .032 Inch Tab, Yellow, Pack of 75

Category: Multi-Stack Vinyl Insulated Wire Disconnects

Wire Joint, High Temperature, Nylon Insulated, (2) 18 to (2) 16 AWG, 600 Volt, Rated at 150° C, Package of 1000 EA.

Category: Crimp Cap Insulators

EMT Compression Connector, Insulated, 2 Inch Diameter, Steel With Zinc Finish, For USe With EMT Conduit

Category: Steel Concrete Tight EMT Compression Connectors

Flex Connector, Tite-Bite Series, Straight, 1-Screw Clamp, 1/2 Inch Diameter, Steel, For Use With Flexible Metal Conduit/Armored Cable

Category: Single Barrel Saddlegrip MC / AC Connectors

AC/Flex Connector, 1/2 Inch, 90°, 2-Screw Clamp, Squeeze Type, Malleable Iron With Zinc Finish, For Use With Armored Cable and Flexible Metal Conduit

Category: 90 Degree Two Screw Squeeze Flex Connectors

Ring Tongue Terminal, Serrated Barrel, Wire Range: 14-18 AWG, Stud Size: #8 (Sold In Multiples of 100)

Category: Non-Insulated Ring Tongues

THB TYD1X4WPG6 , SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

4 Inch Aluminum, Hub Connector with Thermoplastic Insulating Throat, Sealing Ring Nitrile (BUNA-N) for Use with Rigid/IMC Conduit

Category: Aluminum Conduit Hubs

Cable Tie, Weather Resistant, 11-1/2 In Long, 40 lb Tensile Strength, UV Nylon, Black, 3 In Max Bundle Dia., 100 per Bag, Order in Multiples of 100, Intermediate Cross Section

Category: Non-Releasable Cable Ties

1/2 Inch Erickson Coupling, Aluminum, for Use with Rigid/IMC Conduit

Category: Aluminum Rigid Conduit Three Piece Unions

Nylon Insulated Expanded Entry Ring Terminal, Length 1.48 Inches, Width .72 Inches, Maximum Insulation .250, Bolt Hole 1/2 Inch, Wire Range #12-#10 AWG, Color Yellow, Copper, Tin Plated

Category: Nylon Insulated Ring Tongues

Flex Connector, 1-Screw Clamp, 3/8 Inch, 90°, Insulated, Material: Steel, For Use With Armored Cable and Flexible Metal Conduit

Category: 90 Degree Single Barrel MC / AC Connectors