Search results

Sloped-front pre-cut pushbutton enclosures make it easier on operators and ideal for pedestal mounts. This Sloped-Front Pushbutton Enclosures Type 12, E8PBAM item measures 8PBx22.5mm with a material of Steel colored Gray.

Category: Steel Pilot Device Enclosures

Pole Mount Kit, Fits Enclosure 16 Inch, Stainless Steel, Kit includes two mounting channels, two straps suitable for 3-in. (76-mm) to 12-in. (305-mm) diameter pole and mounting hardware

Category: Enclosure Pole Mount Kits

Latch Kit For 1-Door NEMA 12 Enclosure, Handle Type: Keylock, Opens: Counterclockwise, 3 Point Latch, Material/Finish: Steel/Zinc

Category: Latch Kits For Single Door NEMA 12 Enclosures

Enclosure, NEMA 4X, Raised Window Cover with Latches, 10 x 8 x 6 Inch, , Fiberglass, Gray

Category: Fiberglass Hinged Cover Enclosures

Polycarbonate Enclosure, Bulletin Q41 (qline Polycarbonate And Abs Type 4x Enclosures), Size/dims: 4pb X 22.5mm, Material/finish: Polycarb

Category: Polycarbonate Pilot Device Enclosures

One-door Fs Enclosure Type 4x, Bulletin A30s4 (stainless Steel Free-standing Type 4 Enclosures), Size/dims: 90.06x24.06x20.06, Material/finish: Ss Type 304

Category: NEMA 4X Floor Mount Disconnect Enclosures

Drip Shield Kit For NEMA 12 Enclosures, Type: Single Door Wall-Mount, Fits Enclosure Size "B" = 12 Inches, Material/Finish: Steel/Gray Powder Coat

Category: Enclosure Drip Shield Kits

Wall-mount Encl./window, Bulletin Cw1 (concept? Wall-mount Enclosure), Size/dims: 24.00x24.00x6.00, Material/finish: Steel/gray

Category: NEMA 4 Wall Mount Enclosures

Galvanized Telescope Fitting allows adjustment to wireway length from 1.00 (25 mm) to 12.00 (305 mm). This Telescope Fitting, F22GAGV item measures 2.50x2.50 inches with a material of Steel finish Galvanized.

Category: Wireway Tee Fittings

LED Light Extension Cable Assembly, Cable Length: 39.4 Inch, Gangable Up to 10 LED Lights, For Use With AC LED Lighting Packages in Enclsoures.

Category: Enclosure Lighting Connector Cables

Rack Angles,19 In.thru-hole(2), Bulletin Ux1y (ultrx Type 4x Fiberglass Enclosure Accessories), Size/dims: Fits 625mm Ultrx, Material/finish: Steel/zinc

Category: Enclosure Mounting Bracket Kits

WALL ANGLE SPT. KIT 6IN- CLEAR

Category: Cable Tray Mounting Hardware

Cable Runway Elevation Kit elevates ladder rack above rack-to-ladder mounting plate. This Runway Elevation Kit 6.00 Elevation, LEK6 item finish Plated with a material of Steel.

Category: Cable Tray - Elevation Kits

Ladder Rack Curved Section, Outside Bend, Material: Steel, Width: 12"

Category: 90° Vertical Outside Tray Bend

DIN Type Rails For Enclosure Mounting, Material: Steel, Fits 116 mm

Category: Enclosure Mounting Bracket Kits

Cable Runway Vertical Wall Bracket secures ladder rack to a wall or other flat surface. This Vertical Wall Bracket, LVWB item finish Plated with a material of Steel.

Category: Cable Tray Mounting Hardware

HOFF-E ARA7219THG Rack angle

Category: Enclosure Back Panels

Swing Frame provides 19-inch rack-mounting capabilities with U-Style (Type RA) mounting hole pattern. This Ultrx Swing Frame, UU6060SF item fits 625x612mm with a material of Steel finish Plated.

Category: Fiberglass Hinged Cover Enclosures

Ladder Rack Straight Sections (cULus Classified) support cable on straight runs. This Ladder Rack Straight Sections (cULus Classified), LSS6GZ item 6.00 wide with a material of Steel finish Galvanized.

Category: Straight Cable Ladder Tray

Wall-Mount 4x Enclosure, 3pt Latch, Bulletin A17w3 (Fiberglass Type 4x Enclosures with 3pt Latch), Size/Dims: 24.19" x 24.19" x 12, Material/Finish: Fiberglass

Category: Fiberglass Wall Mount Enclosures

Rack Mounting Angles - L Style (Type RP), Material: Steel, Number of Units: 23, Fits Enclosure: 90" x 24"

Category: Rack Mounting Kits & Hardware

Junction Box, NEMA 4X, Opaque Screw Cover, 7.4 x 7.4 x 6.81 Inch, Polyester

Category: PVC / Polyester Screw Cover Junction Boxes

Free-Stand, Single or Dual Access, Type 12, 72.06x30.06x24.06, Steel

Category: NEMA 12 Floor Mount Enclosures

Type 12 A-b Disconnect Encl., Bulletin A22 (type 12 & 13 Enclosures For Allen-bradley Disconnects), Size/dims: 60.00x37.38x16.00, Material/finish: Steel/paint

Category: NEMA 12 Wall Mount Disconnect Enclosures