Search results

Junction Box, NEMA 4X, Hinge Cover, 16 x 14 x 10 Inch, Stainless Steel

Category: NEMA 4 Wall Mount Enclosures

Pushbutton enclosures PB, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and cover: Dipcoat primed, powder-coated on the outside, textured paint, color: RAL 7035, supply includes: Enclosure with screw-cover with 30.5mm pushbutton hole (s), Rear wall mounting holes, description: These PB enclosures can be used for virtually any application that requires mounting of pushbuttons, pilot lights, selector switches,etc. The PB series ensures NEMA protection through a foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and cover.

Category: Steel Pilot Device Enclosures

RTT 9978540 QT#125155 WM302010NC UNION PACIFIC CUSTOM ENCL

Category: NEMA 4 Wall Mount Enclosures

Enclosure, Rack, TS-8, 2000 mm Height X 600 mm Width x 900 mm Depth, Special

Category: Wall Mount Racks

Wall Mount Enclosure, Single Door/Hinge Cover With Quarter Turn Latch, NEMA 4, 36 x 36 x 12 Inch, Carbon Steel/Gray Finish

Category: NEMA 4 Wall Mount Enclosures

Wall Mount Enclosure, Single Door/Hinge Cover With Quarter Turn Latch, NEMA 4, 42 x 36 x 10 Inch, Carbon Steel/Gray Finish

Category: NEMA 4 Wall Mount Enclosures

Wall Mount Enclosure, Hinge Cover With Quarter Turn Latches, NEMA 4X, 30 x 30 x 8 Inch, Stainless Steel, Includes Mounting Plate

Category: Stainless Steel Wall Mount Enclosures

Compact enclosures WM, for isolator door locking, material: Door: Sheet steel, 2.0 mm, all-round foamed-in PU seal, Enclosure: Sheet steel, Mounting plate: Sheet steel, zinc-plated, surface: dipcoat-primed and powder-coated, textured paint, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, Gland door with universal cut-out for disconnectable circuit, description: These flange mount disconnect wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures

Compact enclosures WM, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint, Mounting plate: Zinc-plated, color: RAL 7035, supply includes: Enclosure with door(s), L/h door hinge, Mounting plate, Rear wall mounting holes, description: These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

Category: NEMA 4 Wall Mount Enclosures

Pushbutton housing PB, mini, material: Sheet steel, surface: Polyester powder coating on a phosphated surface finish, color: RAL 7035, supply includes: Cover screws, captive, Wall mounting brackets, description: The NEMA rated PB series pushbutton box enclosure is designed for indoor use to house pushbuttons, selector switches, and pilot lights. This enclosure protects equipment from dirt, dust, sprayed water, oil, and coolants.

Category: Polyester Pilot Device Enclosures

Enclosure, Rack, TS-8, 2000 mm Height X 1000 mm Width x 800 mm Depth, Special

Category: Wall Mount Racks

Oiltight hole seals for mini pushbutton hole, Sheet steel, material: Sheet steel, surface: Powder-coated, color: RAL 7035, supply includes: Oil resistant gasket, description: Used to seal unused or empty pushbutton holes, conduit openings, knockout openings.

Category: Stainless Steel Enclosure Hole Seals

Wall angle, material: Sheet steel, color: RAL 7035, supply includes: Assembly parts for mounting on the enclosure., description: For attaching to the enclosure from the inside, additional holes required in the enclosure. Packaging Unit: 4 pc(s).

Category: Enclosure Mounting Bracket Kits

Radial Fan, 225 mm

Category: Enclosure Compact Cooling Fans

Mounting Plate For KL and KL-HD Enclosures, 7.9 x 12 Inch, 2.0mm Thick, Carbon Steel/Zinc Plated

Category: Enclosure Front Plates

Replacement Temperature Sensor, Design: Blue, Length: 1000mm

Category: Enclosure Temperature Control Switches

RTT 8800370 BRACKET

Category: Enclosure Mounting Bracket Kits

Laminated Copper Bar, 63 x 10 x 2000mm Length

Category: Flexibar

Pushbutton housing PB, extra large, material: Sheet steel, surface: Polyester powder coating on a phosphated surface finish, color: RAL 7035, supply includes: Wall mounting bracket, Mounting plate: Zinc-plated, Cover screws, captive, description: The NEMA rated PB series pushbutton box enclosure is designed for indoor use to house pushbuttons, selector switches, and pilot lights. This enclosure protects equipment from dirt, dust, sprayed water, oil, and coolants.

Category: Polyester Pilot Device Enclosures

Wall Mount Enclosure, Hinge Cover With Quarter Turn Latches, NEMA 4X, 47 x 35 x 10 Inch, Stainless Steel, Includes Mounting Plate

Category: Stainless Steel Wall Mount Enclosures

Mounting Plate For KL and KL-HD Enclosures, 5.9 x 5.9 Inch, 2.0mm Thick, Carbon Steel/Zinc Plated

Category: Enclosure Front Plates

Baying System, TS 8 Series, NEMA 12, 31.5 x 86.6 x 19.7", Includes Enclosure Frame With Door, Roof Plate, Rear Panel, Detachable, 4 Eyebolts, Lock: 3 mm Double-Bit Lock, Gland Plates, and Mounting Plate

Category: Indoor Free Standing Data, Audio, & Video Enclosures

Metal multi-tooth screws, Metal multi-tooth screws, description: For the round holes 4.5 mm diameter in the enclosure section, punched rails and punched sections without mounting flanges. Packaging Unit: 300 pc(s).

Category: Enclosure Clip / Clamp Nut Packages

Padlock Hasp for Carbon Steel AE/WM, Riveted Padlock Hasp for Carbon Steel EB/JB Junction Box and AE/WM Wallmount Enclosures, Captive Cover Prevents Unauthorized Access to Enclosure

Category: Lockout Hasps