Search results

Mini Com 48-port modular patch panel kit with faceplates in black; includes forty eight Mini Com Category 6A jack modules, labels and label covers, (2 RU).

Category: Unloaded Patch Panels

2 fiber OS2 patch cord, LC push pull to LC push pull, riser (OFNR) rated, 16mm jacket, Standard IL 3 meters

Category: Fiber Optic Patch Cords

Opticom® MPO FAP loaded with sixteen (16) key-up/key-down MPO fiber optic adapters, oriented horizontally for Opticom® or Opticom® QuickNet™ Patch Panels and Fiber Enclosures, black.

Category: SC Fiber Distribution Plates

Simplex standard grade SC to reference grade LC singlemode reference cable assembly, riser rated 2mm jacketed cable 9/125µm

Category: Fiber Optic Patch Cords

Opticom® MPO FAP loaded with eight (8) key-up/key-down MPO fiber optic adapters, oriented horizontally for Opticom® or Opticom® QuickNet™ Patch Panels and Fiber Enclosures, black.

Category: SC Fiber Distribution Plates

The Supra-Grip™ female disconnect is made of brass and is tin-plated. It is fully insulated in red nylon. It has a tab size of 0.250 x 0.032 (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.93" (23.6 mm) long and 0.35" (8.9 mm)

Category: Female Nylon Insulated Wire Disconnects

42 RU cage nut equipment rails for Net-Verse D-Type Cabinets, Black, sold in pairs

Category: Rack Cable Management Devices

Panduct® type F narrow slot wiring duct, 1 W x 4 H, 6' length, PVC, adhesive, white, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

Latching flat cable holders, 2" (50.8mm) cable width, gray, standard package.

Category: Cable Tie Bases

Fiber Indoor Distribution Cable, Riser (OFNR), 50um Multimode OM4 48 Fibers

Category: Multimode Fiber Optic Cable

Used to support the 12x4 system by spanning two threaded rod drops that are 18in apart. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in

Category: Mounting Hardware & Brackets

Fiber Indoor-Outdoor Central Tube Armored (Interlocking Aluminum) Cable, Plenum (OFNP), 50um Multimode OM3 12 Fibers

Category: Multimode Fiber Optic Cable

Latching flat cable mount, #6 screw (M3), 1.20" (30.5mm) cable width, gray, standard package.

Category: Cable Tie Bases

Bridle ring, 2.00 diameter., 1/4-20 threaded.

Category: Plain, Threaded & Wood Screw Bridle Rings

Fixed Diameter Cable Clamp, UV Black Nylon, 1/4" Max Bundle

Category: Cable Clamps & Clips

Module supplied with one LC (keyed C green) SFF duplex fiber optic adapter with zirconia ceramic split sleeves.

Category: Snap-In Blank Inserts

Corrugated loom tubing solid wall, .75" (19.1mm) x 100', polyethylene, orange.

Category: Split Wall Loom Tubing

The vibration resistant male tab disconnect in metallic brass helps overcome the failures caused by high vibration. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 22-18 AWG (0.5-1.0 mm²). It is 0.69" (17.4 mm) long and 0.

Category: Male Non-Insulated Wire Disconnects

2 fiber OS2 patch cord, LC push pull to LC push pull, riser (OFNR) rated, 16mm jacket, Standard IL 7 meters

Category: Fiber Optic Patch Cords

2 fiber OM1 LC Duplex to LC Duplex OFNR (riser) rated 16mm jacketed cable Std IL 3m

Category: Fiber Optic Patch Cords

The fiber mounting 2-piece ladder rack bracket attaches to either a 3/8" (9.5mm) wide x 1 1/2" (38.1mm) or a 3/8" (9.5mm) wide x 2" (50.8mm) ladder rack rail. The bracket halves slide into position and clamp together on the ladder rack rail, which allows

Category: Cable Tray Nut, Bolt, & Clamp Assemblies

Panduct® type F narrow slot wiring duct, 1.5 W x 1.5 H, 6' length, PVC, intrinsic blue, SOLD IN 6 FOOT INCREMENTS, ORDER OF 6 FT = 1 PIECE OF DUCT

Category: High Density Wire Duct

The vibration resistant DiscoGrip™ female disconnect is made of brass and is tin-plated. It is fully insulated in blue premium nylon housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.

Category: Female Nylon Insulated Wire Disconnects

The Supra-Grip™ female disconnect is made of brass and is tin-plated. It is fully insulated in blue nylon. It has a tab size of 0.250 x 0.032 (6.3 x 0.5 mm) and supports a wire range of 16-14 AWG (1.5-2.5 mm²). It is 0.93" (23.6 mm) long and 0.35" (8.9 mm

Category: Female Nylon Insulated Wire Disconnects