Search results

2-Port Clear Multi-Tap Pre-Insulated Connector, 2 – 14 AWG

Category: Dual Sided Entry Wire Connector Blocks

NSI IPLD750-6C 750-250 MCM NO

Category: Dual Sided Entry Wire Connector Blocks

NSI IT-500B 500 MCM - 4 AWG P

Category: Dual Sided Entry Wire Connector Blocks

NSI IPLD600-6C 600 MCM - 6 AW

Category: Dual Sided Entry Wire Connector Blocks

Adjustable Percentage Timer, 24 Hour Maximum, 20 Amp, 120-240 Volt, SPDT, Indoor NEMA 4X Enclosure

Category: In-Wall Mechanical Time Switches

Isolated Ground Bar with 7 Circuits 2-14 AWG Isolated Ground Bars are made from either high-strength aluminum alloy 6061-T6 or high-conductivity copper as indicated below. The base is made from high-strength glass-filled polyester. Aluminum connectors are dual-rated for use with aluminum or copper cables.

Category: Load Center Neutral & Ground Bars

NSI 4-350T3 LUG 350 MCM-6 AWG

Category: 4-Conductor Aluminum Mechanical Lugs

1 Hole Long Barrel Copper Compression Lug 4 AWG - 3/8" Bolt Long Barrel Copper Compression Lugs are produced from high conductivity copper tubing. They are tin-plated to provide corrosion low contact resistance. Marked with die index and color coded for easy reference. Listed for 35KV maximum when properly installed and to cable manufacturer instructions. Temperature rating 90 degrees C. .

Category: 1-Hole Long Barrel Copper Compression Lugs

NSI G-43 1" CONDUIT HUB

Category: Ground Clamps With Hub

NSI 2/0-14 (524) GROUND BAR

Category: Load Center Neutral & Ground Bars

TOR 64140 TRANSFORMER 595-1006 REV

Category: Doorbell Signaling Transformers

NSI GRP-8400 BLACK 8 40LB 100

Category: Non-Releasable Cable Ties

4 Port Stacked Lug 800 - 300 MCM Stacked Lugs are large size set screw connectors with wire holes stacked on top of each other to minimize the width of the connector. Made of 6061T-6 aluminum alloy. Tin plated for low contact resistance. Suitable for use with both copper and aluminum conductors. Rated 600 volts (2000V max. per UL486B). UL486A/B Listed. Temperature rating 90 degrees C. Mounting hole spacing is NEMA standard of 1.75".

Category: 4-Conductor Aluminum Mechanical Lugs

1/2" Bronze Split Lockwasher Corrosion resistance and physical strength combine to provide reliability.

Category: Silicon Bronze Lock Washers

NSI L314 3 AWG CU COMPRESSION

Category: 1-Hole Long Barrel Copper Compression Lugs

Aluminum Multiple Connector 4-14 AWG 17 Holes Multiple connectors are made from eithercopper or aluminum bar and can be used ina variety of neutral and grounding applications.Tin plated forlow contact resistance and are suitable foruse with copper or aluminum conductors.

Category: Load Center Neutral & Ground Bars

NPDB LINE 1X350-6 - LOAD 1X350-6

Category: Single Primary / Single Secondary Non-Insulated Distribution Blocks

2-PRT BLK MULTITP PRE-INSLTD CONN 2/0 14AWG

Category: Dual Sided Entry Wire Connector Blocks

(1)1000-250 Primary (6) 2/0-14 Secondary, Power Distribution Block

Category: Single Primary / Multiple Secondary Non-Insulated Distribution Blocks

NSI EWPP202100 UNPRINTED 2" 2

Category: All Weather Corrosion Protection Tape

NSI AL2-38 2 AWG ALUM COMPRES

Category: 1-Hole Aluminum Compression Lugs

Copper Multiple Connector 4-14 AWG 8 Hole Copper multiple connectors are made copper and can be used ina variety of neutral and grounding applications.Tin plated forlow contact resistance and are suitable foruse with copper wire only.

Category: Non-Insulated Multi-Tap Connectors

Copper Multiple Connector 4-14 AWG 15 Hole Copper multiple connectors are made copper and can be used ina variety of neutral and grounding applications.Tin plated forlow contact resistance and are suitable foruse with copper wire only.

Category: Bus Bars

1/0 Awg Alum Compression Lug, 1/2 Bolt Size 2 Hole (al/cu)

Category: 2-Hole Long Barrel Aluminum Compression Lugs