Search results

OZG N44113 CONT CNTR ACCESSOR

Explosion-Proof Conduit Sealing Fitting, Turning Radius 7-3/8 Inch, Trade Size 6 Inch, Connection Type Male, Female, Material Zinc Electroplated Chromate Epoxy Powder Coated Malleable Iron, Mounting Position Horizontal/Vertical, Enclosure Class I Div 1 and 2 Group B C D, Class I Zone 1 and 2 Group IIA IIB, Class II Div 1 and 2 Group E F G, Class III, Approval UL 886, CSA C22.2, Overall Length 14 Inch, Application Seal Conduits in Vertical or Horizontal, to Minimize the Passage of Gases and Vapors and Prevent the Passage of Flames from One Portion of the Electrical System to Another Through the Conduit, Constructional Feature Explosion-Proof

Conduit Hardware, Bushings, Insulating, Trade Size: 6 Inch, Material: Malleable Iron or Steel/Zinc Plated, Connection Type: Set-Screw, Maximum Temperature Rating: 150 Degree C, Features: For Rigid, IMC, EMT, Outside Diameter: 7 3/8 Inch, Width: 1 3/8 Inch

OZG SR-9100-1000 1" 90D STN

OZG CH350T 3-1/2 HUB

OZG GUALB-150A HAZ LOC COND O

OZG SE-1505 1-1/4" WTRTHT SVC

OZ-Gedney Type BBL Insulating Bushing With Locknut, Size: 1-1/4 IN, Phenolic Body, Steel Locknut, Black, Connection: Threaded, 150 DEG C, 2-1/8 IN Outside Diameter, Locknut Thread Length: 1/2 IN, 2-3/8 IN Maximum Diameter, 1-1/4 IN Hole, Third Par

OZG 870IG 2-1/2&3 FM7 COVER

OZG ECGJH-75-4 3/4 X 4" FLEX

Rigid Conduit Body, Access Opening Side, Configuration T, Hub Location Tee, Number of Hubs 3, Hub Size 3 Inch, Size 12-1/16 Inch L x 4-3/8 Inch W x 5-3/4 Inch H, Installation Threaded, Material Zinc Electroplated Aluminum Enameled Gray Iron, Form Type Form 7, Approval UL 514A, CSA C22.2, Used On Rigid Conduit/IMC, Applicable Standard Federal Specification A-A-50563, NEMA FB-1/FB-2.10, Capacity 126 Cu Inch

RDC BSHG AL 1-1/2 TO 3/4 NPT

Armored Cable/Flexible Conduit Connector, Trade Size 1 Inch, Cable Opening Single, Cable/Conduit Type Armored Cable/Metal Clad Cable/Non-Metallic Cable/SE Cable/Flexible Metal Conduit, Cord Size 1-3/8 to 1-1/16 Inch, Installation (2) Screw, Clamp, Throat Type Insulated, Material Electro Zinc Plated Malleable Iron, Approval UL 514B, CSA C22.2, Includes Locknut, Used On Armored Cable/Flexible Metal Conduit, Applicable Standard Federal Specification W-F-406E, NEMA FB-1

Conduit Hardware, Bushings, Insulating, Trade Size: 1/2 Inch, Material: Malleable Iron or Steel/Zinc Plated, Connection Type: Set-Screw, Maximum Temperature Rating: 150 Degree C, Features: For Rigid, IMC, EMT, Outside Diameter: 1 1/8 Inch, Width: 1/2 Inch

Thru wall and Floor Sealing Assembly and Fitting, Constructional Feature Watertight, Corrosion Resistant, Trade Size 3 Inch (Conduit/Steel Pipe), Outer Diameter 3.5 Inch (Conduit/Steel Pipe), Wall Thickness 8-3/4 to 16 Inch, Material Epoxy Zinc Coated Malleable/Ductile Iron (Body), PVC Coated Steel (Pressure Ring), Neoprene (Grommet), Number of Clamp Screw 4

1/2 IN 90 DEG COMP CONN EMT

Rigid Conduit Cable Terminator, Trade Size 2 Inch, Cable Type (1) 1.53 Inch/(2) 0.81 Inch/(3) 0.73 Inch/(4) 0.65 Inch, Diameter 3 Inch, Height 3-3/4 Inch, Material Hot Dip Galvanized Malleable/Ductile Iron, Application Corrosive Location, Damp Location, Water Location, Approval CSA, Sealing Disc Material Canvas Bakelite, Inclusion Top Cover

OZ-Gedney Type GC Commodity Grade Pipe Ground Clamp, Conductor Size: 10 - 2 AWG, Length: 3-5/8 IN, Size: 1-1/4 - 2 IN, Casting: Copper Alloy, Screws: Steel, Finish: Screws: Zinc Electroplated, 3-7/16 IN Height, 13/16 IN Clamp, Third Party Certi

OZG AX-8-150A 1-1/2" EXP FTG

OZ-Gedney Type SR Gold Seal Strain Relief Straight Connector, Size: 3 IN, Conductor Range: 1.8 - 2.1 IN, Malleable Iron, PVC Grommets, Finish: Zinc Plated, 90 DEG C, Connection: MNPT, 2.44 IN Throat Inside Diameter, 1-1/8 IN Thread Length, Dimens

OZG IBC-500LS-20BC 5" GRD INS

OZG ECGJH-300-24 3 X 24" FLEX

OZ-Gedney Type GUALB Conduit Outlet Box, Number Of Outlet: 2, Malleable Iron Body/Cover, Size: 1-1/4 IN, Cable Entry: (2) 1-1/4 IN Hubs, 30 CU-IN Capacity, No, 3-3/4 IN Cover Opening, Finish: Zinc Electroplated With Aluminum Enamel, 4-1/4 IN Width, 3 IN Depth, 4-1/4 IN Height, NEMA Rating: NEMA 4, 7CD, 9EFG, Third Party Certification: UL File Number E-30513, Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 020945, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 And 505, Military Specification Mil-F-28675, Federal Specification A-A-50563, For Rigid Conduit And IMC

2 X 15 IN FLEX CPLG