Search results

Grounding Bushing, Insulated, Size: 1 1/4 Inch, Material: Malleable Iron, Lug: Aluminum, Threaded, Maximum Temperature Rating: 150° Celsius, For Use With Rigid/IMC Conduit, With Aluminum Lug, Outside Diameter: 2 1/8 Inch, Width: 5/8 Inch, Grounding Wire Size Minimum: 8 Wag

Category: Threaded Ground Bushings

Conduit Body With Cover/Gasket, Type: LL, Size: 3/4 Inch, Spec 5, Material: Malleable Iron, For Use With Rigid/IMC Conduit

Category: Type LL Iron Conduit Bodies

OZ-Gedney Type LR Conduit Body, 2 IN Hub, Length: 10-1/8 IN, 3-3/8 IN Height, Die-Cast Copper-Free Aluminum, Finish: Aluminum Enamel, Connection: Tapered FNPT, 3 (2/0 AWG) Conductors, 77.5 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No. 18, Federal Specification Number A-A-50563, Hazardous Locations: Class 1, Division 2 Per NEC section 501-4(B), NEMA: FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type LR Iron Conduit Bodies

OZG FS2T75 FS 2G TANDEM CAST

Category: 2-Gang Malleable Iron FS & FD Device Boxes

3 IN ALUM LR COND BODY

Category: Type LR Iron Conduit Bodies

OZ-Gedney Type C - 15L End stopped 2-Screw Connector, Size: 3/8 IN (1/2 IN KO), Connection: Male NPS Hub X Set Screw, Conductor Range: 3/8 - 5/8 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-1/16 IN Length X 1-3/8 IN Width, Third Party Certification: UL File Number E-11852, CSA 9795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable

Category: Straight Squeeze Flex Connectors

Conduit Bushing, Type: Threaded, Size: 5 Inch, Material: Polypropylene, Maximum Temperature Rating: 105° Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

OZ-Gedney Type SR Dual Grommet Strain Relief Straight Connector, Size: 1-1/2 IN, Conductor Range: 1 - 1.375 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated

Category: Straight Malleable Iron Cord Grips

Cable Support, Type 1-Piece Plug, Body Type Tapered/Knurled, Conduit Type Rigid/IMC/EMT, Voltage Rating 600 V, Conduit Position Vertical, Conductor Size 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 KCMIL (Aluminum/Copper Clad Aluminum/Copper), Conduit Size 2 Inch, Cable Type Non-Armored, Number of Conductors 2 to 4 (Same Size), Size 3-1/8 Inch Dia x 2-5/8 Inch H, Material Hot Dip Galvanized Malleable/Ductile Iron, Application Indoor, Approval UL 514B, CSA C22.2, Applicable Standard NEC 300-19, With pOZi-grip S-Style Wedging Plug

Category: Iron Rigid Conduit Cable Supports

OZ-Gedney Type LR Conduit Body, 2-1/2 IN Hub, Length: 13-3/4 IN, 4 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (4/0 AWG) Conductors, 142 CU-IN Volume, Third Party Certification: UL File Num

Category: Type LR Iron Conduit Bodies

OZG GUJT-100 HAZ LOC OUTL BX

Category: Explosion-Proof T Conduit Outlet Boxes

Rigid/IMC Conduit Strap, Type 1-Hole Snap-On Double Ribbed, Trade Size 4 Inch, Hole/Bolt Size 5/8 Inch, Width 1-1/2 Inch, Material Zinc Plated Steel, Used On Rigid Conduit/IMC

Category: Steel 1-Hole Conduit Straps

OZ-Gedney Type CHT Space-Maker Conduit Hub, Size: 4 IN, Malleable Iron, Finish: Zinc Plated, Connection: 4-8 Female Tapered NPSM, Dimensions: 5-1/2 IN Diameter X 2-3/4 IN Length, Box Wall Thickness: 1/8 IN, Third Party Certification: UL File Number E-11853 For Use In Wet Locations, CSA 009795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-408E, NEMA : FB-1, NEMA : 4, NEMA : 12, Hazardous Locations: Class I, Division 2/Class III, Division 1, 2 Per NEC 501-4(b), 501.10(b)(4), 502-4(a)(2), 503-3(a), For Rigid Conduit And IMC

Category: Malleable Iron Conduit Hubs With Grounding

OZ-Gedney Clip-On 170 Series Cover, 1 IN Hub, Form: 7, Screw-In Mounting, Iron Body, Stainless Steel Screws, Zinc Electroplated Clips, Finish: Zinc Electroplated, Gray, Connection: Clip-On, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, For Form 7 Conduit Bodies

Category: Iron Conduit Body Covers

OZ-Gedney Type T Conduit Body, 1-1/4 IN Hub, Form: 7, Length: 7-7/16 IN, 3-3/16 IN Width, 2-5/16 IN Height, Iron, Finish: Zinc Electroplated With Aluminum Enamel, Gray, Connection: Tapered FNPT, 3 (3 AWG) Conductors, 20 CU-IN Volume, Third Party Certi

Category: Type T Iron Conduit Bodies

OZ-Gedney Type EYD Vertical Drain/Sealing Fitting, Size: 1 IN, Malleable Iron Body, Seal Cover And Filler Plug, Stainless Steel Drain/Breather, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-3/4 IN Body Diameter X 4-3/8 IN Ove

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

Cable Support, Type 1-Piece Plug, Body Type Tapered/Knurled, Conduit Type Rigid/IMC/EMT, Voltage Rating 600 V, Conduit Position Vertical, Conductor Size 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 KCMIL (Aluminum/Copper Clad Aluminum/Copper), Conduit Size 3-1/2 Inch, Cable Type Non-Armored, Number of Conductors 5 (Different Size), Size 5-1/8 Inch Dia x 3-1/2 Inch H, Material Hot Dip Galvanized Malleable/Ductile Iron, Application Indoor, Approval UL 514B, CSA C22.2, Applicable Standard NEC 300-19, With pOZi-grip S-Style Wedging Plug

Category: Iron Rigid Conduit Cable Supports

Conduit Body Cover, Aluminum, 1"

Category: Aluminum Conduit Body Covers

OZG UNY-75A 3/4 IN ALUM UNION

Category: Explosion-Proof Type UNY Unions

OZ-Gedney Type 1 Threaded Conduit Locknut, Material of Construction: Aluminum, 3/16 IN Height, 3-9/32 IN Width, Size: 1-1/4 IN, 11-1/2 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA 009795 And 067549, Applicable Third Part

Category: Aluminum Conduit Locknuts

OZGBBL-300

Category: Rigid & IMC Bushings

Cable and Rigid Conduit Sealing Bushing, Conduit Size 4 Inch, Wire Size (1) 2.63 Inch/(2) 1.63 Inch/(3) 1.51 Inch/(4) 1.26 Inch, Diameter 5-1/8 Inch, Material Slotted PVC Coated Steel (Disc), Neoprene (Sealing Ring), Stainless Steel (Socket Head Cap Screw/Washer), Approval UL E-11857, Conduit Inner Diameter 4.026 Inch

Category: Rigid & IMC Bushings

Grounding Bushing, Insulated, Size: 4 Inch, Material: Malleable Iron Or Steel/zinc Plated, Connection Type: Set-screw, Maximum Temperature Rating: 150° C, Features: For Rigid, IMac, Met, Outside Diameter: 5 Inch, Width:1 1/8 Inch, Grounding Wire Size Minimum: 250 Mm

Category: Threaded Ground Bushings

OZ-Gedney Type IBC-L-BC Insulated Grounding Bushing With Lug, Size: 1-1/2 IN, Malleable Iron Body, Bronze Lug, Steel Clamping Screw And Set Screws, Finish: Zinc Plated Body, Bright Dip Lug, Zinc Plated Clamping Screw And Set Screws, Connecti

Category: Threaded Ground Bushings