Search results

OZ-Gedney Type LBY 90 DEG Capped Conduit Short Elbow, Malleable Iron, Finish: Zinc Electroplated, Length: 2-3/8 IN, Trade Size: 3/4 IN, Connection: Tapered FNPT Hub, Third Party Certification: UL 34997, Hazardous Location: Class I, Division 1, 2, G

Category: Explosion-Proof Malleable Iron Capped Pulling Elbows

Conduit Bushings, Threaded, 3/4 Inch, Thermoplastic, For Use With Rigid/IMC Conduit and to Insulate Cables Passing Through Metal Boxes or Troughs

Category: Rigid & IMC Bushings

Conduit Hardware, Couplings, Armored Cable, Type: Compression, Trade Size: 1 1/4inch, For Use With: Threadless Rigid, Material: Malleable Iron, Features: Concrete Tight

Category: Rigid Compression Couplings - Iron

Conduit Hardware, Couplings, Armored Cable, Type: Compression, Trade Size: 3 Inch, For Use With: Threadless Rigid, Material: Malleable Iron, Features: Concretetight

Category: Rigid Compression Couplings - Iron

OZ-Gedney Type SR Grip-Tite Strain Relief Straight Connector, Size: 1/2 IN, Conductor Range: 0.156 - 0.25 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated Body

Category: Single / Double Weave Strain-Relief Grips

OZ-Gedney Clamp Back, Size: 1 IN, 5/16 IN Thick, 1 Holes, Malleable Iron, Finish: Hot Dip Galvanized, Dimensions: 3-3/16 IN Length X 1-5/16 IN Width, 3/8 IN Hole, Dimension E: 9/16 IN X 7/16 IN, Third Party Certification: CSA 009795, Applicable Third

Category: Clamp Backs - Iron

OZ-Gedney Type 4Q Liquid Tight 90 DEG Connector, Size: 1 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 1-3/4 IN Width, Dimension A: 2 IN, Dimension D: 1

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Clamp Back, Size: 2 IN, 3/8 IN Thick, 1 Holes, Malleable Iron, Finish: Hot Dip Galvanized, Dimensions: 5-1/8 IN Length X 2 IN Width, 9/16 IN Hole, Dimension E: 5/8 IN X 13/16 IN, Third Party Certification: CSA 009795, Applicable Third Party

Category: Clamp Backs - Iron

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 4.13 IN Outside Diameter, 2.97 IN Inside Diameter, 3 X 2-1/2 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22

Category: Reducing Washers

Liquidtight Connector, 90°, 1-1/2 Inch, Malleable Iron, For Use With Metallic Liquidtight Conduit, UL 514-B, CSA C22.2, Applicable Standard Federal Specification WF-406E, NEMA; Application Hazardous Location; Environmental Condiotions Oil Tight

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type 4Q Liquid Tight Straight Connector, Size: 1-1/2 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, 2-3/4 IN Width, 2 IN Height, Third Party Cer

Category: Malleable Iron Liquidtight Flex Connectors

Grounding Bushing, 4 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 2/0 AWG, Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

OZ-Gedney Type ACV 90 DEG Center Stopped 2-Screw Clamp Connector, Size: 3/4 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 29/32 - 1-1/64 IN, Malleable Iron, Finish: Zinc Electroplated, 7/16 IN Thread Length, Dimension A: 1-13/16 IN,

Category: 90 Degree Two Screw Squeeze Flex Connectors

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 1 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-5/8 IN Body Diameter X 4-3/8 IN Overall Length, 2-7/16 IN Turning Radius, 3.75 OZ Sealing Compound Required, 1/8 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof Female Vertical Sealing Fittings

OZ-Gedney BS-S Series Domed Top Design Cover, 1-1/4 - 1-1/2 IN Hub, Screw-In Mounting, Pre-Galvanized Stamped Steel, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Sta

Category: Steel Conduit Body Covers

OZ-Gedney Type 4 Three Piece Coupling, Trade Size: 3/4 IN, 1-3/4 IN Outside Diameter, Length: 1-5/8 IN, Flexibility: RMC And IMC, Malleable Iron, Connection: Threaded, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Pa

Category: Iron Rigid Conduit Three Piece Couplings

OZ-Gedney Type SGN Solid Cover Sealing Gasket, Trade Size: 2 IN, Closed-Cell Neoprene, 100 DEG C, For Malleable Iron Conduit Bodies

Category: Neoprene Conduit Body Gaskets

Liquidtight Connector, 90°, 2 Inch, Malleable Iron, For Use With Metallic Liquidtight Conduit, UL 514-B, CSA C22.2, Applicable Standard Federal Specification WF-406E, NEMA; Application Hazardous Location; Environmental Condiotions Oil Tight

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type SLG Sealing Locknut, Material of Construction: Steel, Finish: Zinc Plated, 5/16 IN Height, 2-7/8 IN Width, Size: 2 IN, 11-1/2 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA AP57250, Applicable Third Party

Category: Gasketed Conduit Locknuts

OZ-Gedney BS-S Series Domed Top Design Cover, 2 IN Hub, Screw-In Mounting, Pre-Galvanized Stamped Steel, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 5

Category: Steel Conduit Body Covers

Grip-Tite® Strain Relief Cord Grip, Straight, Dual Grommet, Cord Range: 0.250 Inch - 0.375 Inch, Hub: 1/2 Inch, Malleable Iron, Furnished with Sealing Ring/Locknut.

Category: Straight Malleable Iron Cord Grips

Conduit Body, Type LL, 3/4 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type LL Iron Conduit Bodies

Conduit Body, Type C, 1 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type C Iron Conduit Bodies

Conduit Body With Cover and Gasket, Type C, 1" Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type C Iron Conduit Bodies