Search results

OZ-Gedney Type PLG Patented Threaded Insert Plug, Size: 2-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Threaded NPT, Body Thick: 1-1/8 IN, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Listed F

Category: Explosion-Proof Square Head Close-Up Plugs

OZ-Gedney Type PLG Patented Threaded Insert Plug, Size: 4 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Threaded NPT, Body Thick: 1-1/4 IN, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Listed For H

Category: Explosion-Proof Square Head Close-Up Plugs

OZ-Gedney Ground-Tite Type 4Q-L Grounding Liquid Tight Straight Connector With Lug, Size: 3/4 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 14 - 4 AWG, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA

Category: Malleable Iron Liquidtight Flex Connectors

Oz-g 970 3-1/2+4 Cond Bodycvr

Category: Steel Conduit Body Covers

OZ-Gedney Type RB Reducing Bushing, Size: 2-1/2 X 1 IN, Malleable Iron, Flush Mounting, Finish: Zinc Electroplated, Connection: Tapered NPT Thread, 1 IN Body Length, Third Party Certification: UL File Number E-34997, Class I, Division 1, 2, Groups

Category: Iron Alloy Reducing Bushings

Liquidtight Sealing Ring, 1/2 Inch, Steel Retaining Ring, Neoprene Gasket

Category: Liquidtight Connectors - Accessories

Reducing Washer, 3-1/2" x 2", Steel

Category: Reducing Washers

Liquidtight Connector, 45°, 1-1/4", Malleable Iron, For Metallic Liquidtight Conduit, UL 514-B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF-406E, NEMA; APPLICATION HAZARDOUS LOCATION; ENVIRONMENTAL CONDITIONS OIL TIGHT

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

Reducing Washer, Steel, 2" x 1"

Category: Reducing Washers

OZ-Gedney Type HB Insulated Bushing, Size: 3/4 IN, Steel, Finish: Hot Dip Or Mechanically Galvanized, Connection: Threaded, 150 DEG C, 1-3/8 IN Outside Diameter, 5/8 IN Width, Third Party Certification: UL File Number E-11853, CSA 011584, Applicable

Category: Threaded Ground Bushings

OZ-Gedney Type ACV 90 DEG Center Stopped 2-Screw Clamp Connector, Size: 3/8 IN (1/2 IN KO), Connection: Male NPS Hub X Set Screw, Conductor Range: 23/64 - 21/32 IN, Malleable Iron, Finish: Zinc Electroplated, 7/16 IN Thread Length, Dimension A: 1-5/16 IN, Dimension B: 13/16 IN, Third Party Certification: UL File Number E-11852 (Armored Cable And Flexible Metal Conduit), Hazardous Location: NEC 501-4(b) Class I Division II, NEC 350-5 (Grounding Means), CSA 9795 And 11584 (Armored cable and Flexible Metal Conduit), Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable, Flexible Metal Conduit, Non-Metallic And Service Entrance Cable

Category: 90 Degree Two Screw Squeeze Flex Connectors

OZG 325-R 1-1/4 TO 3/4 RDC BS

Category: Iron Alloy Reducing Bushings

Oz-g 341r 3x2 Red Bush

Category: Iron Alloy Reducing Bushings

Conduit Hub, Threaded, Raintight, Size: 4", Malleable Iron

Category: Malleable Iron Conduit Hubs

Oz-gedney 4q-4400 Type 4q Liquid Tight 45 Deg Connector, Size: 4 In, Connection:tapered Mnpt Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, Nema Rating: Nema 4, 6-1/8 In Width, Dimension A: 7-1/2 In, 1-1/4 In Thread Length

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 3-1/2 IN Outside Diameter, 0.88 IN Inside Diameter, 2-1/2 X 1/2 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA

Category: Reducing Washers

OZ-Gedney Type 1 Threaded Conduit Locknut, Material of Construction: Aluminum, 3/16 IN Height, 1-1/8 IN Width, Size: 1/2 IN, 14 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA 009795 And 067549, Applicable Third Party Standa

Category: Aluminum Conduit Locknuts

Reducing Bushing, Aluminum, 1-1/2" x 1"

Category: Aluminum Reducing Bushings

U-Bolt w/ Hex Nuts, 2-1/2", Galvanized Steel

Category: U Bolts

OZ-Gedney Type TX Expansion Fitting, Trade Size: 3 IN, 5.38 IN Outside Diameter, Flexibility: EMT Conduit, Third Party Certification: UL 14895, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For EMT Conduit

Category: Steel EMT Expansion Fittings

Conduit Offset Nipple, Type Offset, Threaded Male, Trade Size 3/4 Inch, Length 1-5/8 Inch, Material Zinc Plated Malleable Iron, Approval UL 514B, CSA C22.2, Used On Rigid Conduit/IMC, Applicable Standard NEMA FB-1

Category: Zinc Die Cast Offset Nipples

OZ-Gedney Type 2 Non-Grounding Conduit Bushing, Size: 1-1/4 IN, Malleable Iron, Finish: Zinc Plated, Connection: Threaded NPS, 2 IN Outside Diameter, 5/8 IN Width, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Party

Category: Rigid & IMC Bushings

OZG GH-75B GNDG HUB

Category: Ground Clamps With Hub

Liquidtight Grounding Connector, 90 Degree, Insulated, Size: 1-1/2 Inch, Material/Finish: Malleable Iron/Zinc

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors