Search results

OZ-Gedney Type IB Non-Grounding Insulating Bushing, Size: 1-1/4 IN, Polypropylene, Gray, Connection: Threaded, 105 DEG C, 2 IN Maximum Diameter, 9/16 IN Maximum Height, Third Party Certification: UL File Number E-11853, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-408E, For Threaded Rigid Conduit And IMC

Category: Threaded Ground Bushings

Armored/Metal Clad Cable Terminator, Trade Size 1 Inch, Cable Type Non-Jacketed Metal Clad Cable, Diameter 2-1/8 Inch, Length 2-3/8 Inch, Material Zinc Electroplated Malleable Iron (Body/Locknut), Phenolic (Insulating Bushing), Electro Plated Steel (Screw), Application Dry Location, Approval UL 514B, CSA C22.2

Category: Single Barrel MC / AC Connectors

OZ-Gedney Type LBY 90 DEG Capped Conduit Short Elbow, Malleable Iron, Finish: Zinc Electroplated, Length: 3-5/16 IN, Trade Size: 1-1/4 IN, Connection: Tapered FNPT Hub, Third Party Certification: UL 34997, Hazardous Location: Class I, Division 1,

Category: Explosion-Proof Malleable Iron Capped Pulling Elbows

Conduit Offset Nipple, Type Offset, Threaded Male, Trade Size 1 Inch, Length 1-5/8 Inch, Material Zinc Plated Malleable Iron, Approval UL 514B, CSA C22.2, Used On Rigid Conduit/IMC, Applicable Standard NEMA FB-1

Category: Zinc Die Cast Offset Nipples

Oz-g C47 1-1/4 Mall C Condbdy

Category: Type C Iron Conduit Bodies

Reducing Washer, 4" x 2-1/2", Steel

Category: Reducing Washers

OZ-Gedney Type KC Center Stopped 2-Screw Clamp Connector, Size: 1-1/4 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1-9/32 - 1-5/8 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-7/8 IN Length X 2-13/16 IN Width, Third Party Certification: UL File Number E-11853 (Flexible Metal Conduit), E-11856 (Sheathed Cable), E-11858 (Service Entrance Cable), CSA 9795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable, Flexible Metal Conduit, Interlocked Metal Clad Cables, Non-Metallic And Service Entrance Cable

Category: Straight Squeeze Flex Connectors

OZ-Gedney Type 1 Threaded Conduit Locknut, Material of Construction: Heavy Stock Steel, Finish: Zinc Plated, 1/2 IN Height, 7-15/16 IN Width, Size: 6 IN, 8 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA 057250 And 009795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-408E, NEMA : FB-1, For Rigid Conduit And IMC

Category: Steel Conduit Locknuts

OZ-Gedney Spec 5 Type LL Conduit Body, 1-1/4 IN Hub, Length: 8-1/4 IN, 2-5/8 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (2 AWG) Conductors, 32 CU-IN Volume, Third Party Certification: UL

Category: Type LL Iron Conduit Bodies

Sealing Fitting, Male/Female, Vertical/Horizontal, Size: 1 Inch, Malleable Iron

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

OZ-Gedney Type C Conduit Body, 1-1/2 IN Hub, Form: 7, Length: 8-3/16 IN, 2-7/16 IN Width, 2-9/16 IN Height, Iron, Finish: Zinc Electroplated With Aluminum Enamel, Gray, Connection: Tapered FNPT, 3 (2 AWG) Conductors, 27 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, Hazardous Locations: Class 1, Division 2, Per NEC section 501-4(B), NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type C Iron Conduit Bodies

OZ-Gedney Spec 5 Type X Conduit Body, 1 IN Hub, Length: 7-1/8 IN, 3-1/2 IN Width, 2 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (4 AWG) Conductors, 12 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, Hazardous Locations: Class 1, Division 2 Per NEC Section 501-4(B), NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type X Iron Conduit Bodies

OZ-Gedney Type SUBC Right Angle Conduit Clamp, 3 IN Cable, Cable Type: Rigid Conduit, IMC, EMT, Malleable Iron, Steel Nuts And Bolts, Finish: Clamp: Hot Dip Galvanized, Hardware: Mechanically Galvanized, For Securing Rigid Conduit, IMC or EMT Cond

Category: Malleable Iron EMT Right Angle Type K-Clamps

OZ-Gedney Type SR Grip-Tite Strain Relief Straight Connector, Size: 1 IN, Conductor Range: 0.75 - 0.875 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated Body,

Category: Straight Malleable Iron Cord Grips

Liquidtight Connector, 90°, 4 Inch, Malleable Iron, For Use With Liquidtight Flexible Metal Conduit, UL 514-B, CSA C22.2, Applicable Standard Federal Specification WF-406E, NEMA; Application Hazardous Location; Environmental Conditions Oil Tight

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney BC-G Series Flat Top Design Cover, 2-1/2 - 3 IN Hub, Screw-In Mounting, Iron Body, Stainless Steel Screws, Finish: Hot Dip Galvanized, Gray, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards:

Category: Iron Conduit Body Covers

OZ-Gedney Type GASK Solid Cover Gasket, Trade Size: 1 IN, Closed-Cell Neoprene, 100 DEG C, For Form 7 Conduit Bodies

Category: Neoprene Conduit Body Gaskets

Grounding Liquidtight Connector, 1 in, 45°, Insulated Throat, Malleable Iron, Zinc Plated.

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type SLG Sealing Locknut, Material of Construction: Steel, Finish: Zinc Plated, 11/32 IN Height, 4-1/8 IN Width, Size: 3 IN, 8 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA AP57250, Applicable Third Party Stan

Category: Gasketed Conduit Locknuts

Conduit Bushing, Insulating, 1/2 Inch, Threaded, Thermoplastic Phenolic, Rated 150° Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

O-Z/Gedney G-500G Universal Ground Clamp, 8 to 2 AWG Conductor, 7/8 in THK Bar, Malleable Iron

Category: U-Bolt Ground Clamps

Reducing Bushing, Size: 1 x 1/2 Inch, Material: Aluminum

Category: Aluminum Reducing Bushings

Explosion-Proof Conduit Outlet Box, Style E, Hub Size 3/4 Inch, Hub Type External, Number of Hubs 1, Hub Location Dead End, Capacity 15 Cu Inch, Shape Round, Cover Type Externally Threaded, Cover Opening Diameter 3 Inch, Enclosure Class I Div 1 and 2 Group B C D, Class II Div 1 and 2 Group E F G, Class III, NEMA 3/4, Material Zinc Electroplated Aluminum Enameled Malleable Iron Body, Copper Free Aluminum Cover, Approval UL, CSA C22.2, Applicable Standard NEC, Application Pulling of Wires, Hazardous Location, Used On Rigid/IMC Conduit

Category: Explosion-Proof E Conduit Outlet Boxes

OZ-Gedney Type KC Center Stopped 2-Screw Clamp Connector, Size: 2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 2-1/8 - 2-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 3 IN Length X 4-1/4 IN Width, Third Party Certification: UL File Number E-11853, CSA 9795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-406E, NEMA : FB-1, For Armored Cable, Flexible Metal Conduit, Interlocked Metal Clad Cables, Non-Metallic And Service Entrance Cable

Category: Straight Squeeze Flex Connectors