Search results

OZG ABB-350 3-1/2 IN COMBO BS

Category: Rigid & IMC Bushings

Sealing Fitting, Male/Female, Vertical/Horizontal, Size: 3/4 Inch, Malleable Iron

Category: Explosion-Proof 40% Fill Female (Vertical / Horizontal) Sealing Fittings

OZ-Gedney Ground-Tite Type 4Q-LT Grounding Liquid Tight Straight Connector With Lug, Size: 1-1/4 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 6 - 1/0 AWG, Malleable Iron Body and Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, Hazardous Location, 2-7/8 IN Width, 1.938 IN Height, 1-3/4 IN Turning Radius Gland Nut, Third Party Certification: UL File Number E-24264, CSA 9795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-406E, NEMA : FB-1, Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

Reducing Bushing, Threaded, Malleable, 1-1/4'' to 1/2''

Category: Iron Alloy Reducing Bushings

Reducing Bushing, Steel, 1/2 x 3/8 Inch, For Use With Rigid/IMC Conduit

Category: Steel Reducing Bushings

OZ-Gedney Type EL-9 90 DEG Conduit Elbow, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 1-1/2 IN, Connection: Tapered FNPT Hub, Dimension A: 4 IN, 3 IN Turning Radius, Third Party Certification: UL 34997, Hazardous Locations: Class I, Di

Category: Iron Rigid Conduit Elbows

OZ-Gedney Spec 5 Type C Conduit Body, 3 IN Hub, Length: 15-1/8 IN, 4-3/8 IN Width, 4-3/4 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (4/0 AWG) Conductors, 181 CU-IN Volume, Third Party Certi

Category: Type C Iron Conduit Bodies

IMC/Rigid Conduit Reducing Washer, Type Flat, Large End Trade Size 3 Inch, Small End Trade Size 1 Inch, Size 1.37 Inch ID x 4.13 Inch OD, Material Zinc Pre-Galvanized Steel, Approval UL 514B, CSA C22.2, Applicable Standard NEMA FB-1

Category: Reducing Washers

OZ-Gedney Type SR Gold Seal Strain Relief Straight Connector, Size: 2 IN, Conductor Range: 1.4 - 1.6 IN, Malleable Iron, PVC Grommets, Finish: Zinc Plated, 90 DEG C, Connection: MNPT, 1.93 IN Throat Inside Diameter, 5/8 IN Thread Length, Dimensio

Category: Straight Malleable Iron Cord Grips

OZ-Gedney Type IBC-L-BC Insulated Grounding Bushing With Lug, Size: 1-1/4 IN, Malleable Iron Body, Bronze Lug, Steel Clamping Screw And Set Screws, Finish: Zinc Plated Body, Bright Dip Lug, Zinc Plated Clamping Screw And Set Screws, Connection: Threaded, 150 DEG C, 14 - 4 AWG Grounding Wire, 2-1/8 IN Outside Diameter, 5/8 IN Width, 1-5/8 IN Turning Radius With Lug, Third Party Certification: UL File Number E-24264, CSA 009795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-408E, NEMA : FB-1, For Rigid Conduit And IMC

Category: Threaded Ground Bushings

OZ-Gedney Type 1 Threaded Conduit Locknut, Material of Construction: Heavy Stock Steel, Finish: Zinc Plated, 3/16 IN Height, 2-1/4 IN Width, Size: 1-1/2 IN, 11-1/2 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA 057250 And

Category: Steel Conduit Locknuts

OZ-Gedney Type SG Solid Cover Sealing Gasket, Trade Size: 1-1/4 - 1-1/2 IN, Velbuna Composition, 100 DEG C, For Malleable Iron Conduit Bodies

Category: Neoprene Conduit Body Gaskets

Liquidtight Connector, 90°, 1/2 inch, Insulated Throat, Material: Malleable Iron

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type FS-1 Flat Cast Device Box Cover, Cast Aluminum, Finish: Aluminum Enamel, Number Of Outlet: (1) Duplex Receptacle, Device Box Mounting, No, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification A-A-50563, NEMA : FB-1, OS-1, For Duplex Receptacle

Category: Device Box Covers - Aluminum

OZ-Gedney Type CHM-T Raintight Conduit Hub, Size: 3/4, Malleable Iron, Finish: Zinc Electroplated, Connection: Male X 3/4-14 Tapered FNPT, Dimensions: 1-3/4 IN Diameter X 1-1/2 IN Length, Box Wall Thickness: 9/32 IN, Third Party Certification: UL

Category: Malleable Iron Conduit Hubs With Grounding

2 IN PIPE STRAP RGD & IMC

Category: Malleable Iron 1-Hole Conduit Straps

OZ-Gedney Type 1 Threaded Conduit Locknut, Material of Construction: Aluminum, 3/16 IN Height, 1-7/16 IN Width, Size: 3/4 IN, 14 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA 009795 And 067549, Applicable Third Party Stand

Category: Aluminum Conduit Locknuts

OZ-Gedney Type BJ Bonding Jumper, Size: 3-1/2 - 4 IN, Clamps: Malleable Or Ductile Iron, U-Bolts: Steel, Braids: Tinned Copper, Finish: Clamp And U-Bolt: Hot Dip Galvanized, 24 IN Fully Extended Braid, Third Party Certification: UL File Number

Category: Bonding Jumpers

OZ-Gedney Type AC 90 DEG Center Stopped Squeeze Connector, Size: 4 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 4-7/64 - 4-9/16 IN, Malleable Iron, Finish: Zinc Electroplated, 1-1/4 IN Thread Length, Dimension A: 13 IN, Dimension B:

Category: 90 Degree Two Screw Squeeze Flex Connectors

OZ-Gedney Type GUAL Conduit Outlet Box, Number Of Outlet: 2, Malleable Iron Body/Cover, Size: 1-1/2 IN, Cable Entry: (2) 1-1/2 IN Hubs, 70 CU-IN Capacity, No, 5-1/8 IN Cover Opening, Finish: Zinc Electroplated With Aluminum Enamel, 5-5/8 IN Width, 3-3/4 IN Depth, 5-5/8 IN Height, NEMA Rating: NEMA 4, 7CD, 9EFG, Third Party Certification: UL File Number E-30513, Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 020945, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 And 505, Military Specification Mil-F-28675, Federal Specification A-A-50563, For Rigid Conduit And IMC

Category: Explosion-Proof L Conduit Outlet Boxes

OZ-Gedney Type C Mogul Conduit Body, 2-1/2 IN Hub, Length: 23-1/4 IN, 4.63 IN Width, 5.13 IN Height, Malleable Iron, Finish: Triple coat: Zinc Electroplated, Dichromate, Epoxy Powder Coat, Connection: Tapered FNPT, 335 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, Hazardous Locations: Class 1, Division 2, Per NEC section 501-4(B), NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Category: Type C Iron Conduit Bodies

OZ-Gedney Type 15-G Conduit Strap, Malleable Iron, Finish: Hot Dip Galvanized, 1/4 IN Mounting Hole Width, 1 Holes, 23/32 IN Width, Length: 2-7/32 IN, 1-1/8 IN Height, Trade Size: 3/4 IN, Third Party Certification: CSA 9795, Applicable Third Party S

Category: Malleable Iron 1-Hole Conduit Straps

Rigid Set Screw Coupling, Size: 5 Inch, Concrete Tight, Malleable Iron

Category: Iron Rigid Conduit Set Screw Couplings

OZ-Gedney Type SR Dual Grommet Strain Relief Straight Connector, Size: 2 IN, Conductor Range: 1.375 - 1.75 IN, Malleable Iron Body And Gland Nut, Nylon Gripper, Neoprene Grommet, PVC Or Buna-N Sealing Ring, Steel Locknut, Finish: Zinc Plated B

Category: Straight Malleable Iron Cord Grips