Search results

OZ-Gedney Type SR Gold Seal Strain Relief Straight Connector, Size: 1/2 IN, Conductor Range: 0.2 - 0.3 IN, Malleable Iron, PVC Grommets, Finish: Zinc Plated, 90 DEG C, Connection: MNPT, 0.52 IN Throat Inside Diameter, 9/16 IN Thread Length, Dimensi

Category: Straight Malleable Iron Cord Grips

Thread Lubricant, 2 Ounce Tube

Category: Multi-Purpose Lubricant

OZ-Gedney Type BJ Bonding Jumper, Size: 1 - 1-1/4 IN, Clamps: Malleable Or Ductile Iron, U-Bolts: Steel, Braids: Tinned Copper, Finish: Clamp And U-Bolt: Hot Dip Galvanized, 24 IN Fully Extended Braid, Third Party Certification: UL File Number

Category: Bonding Jumpers

IMC/Rigid Conduit Reducing Washer, Type Flat, Large End Trade Size 2 Inch, Small End Trade Size 1/2 Inch, Size 0.88 Inch ID x 3 Inch OD, Material Zinc Pre-Galvanized Steel, Approval UL 514B, CSA C22.2, Applicable Standard NEMA FB-1

Category: Reducing Washers

OZ-Gedney Type 7 Bushed Conduit Nipple, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 2 IN, 3 IN Outside Diameter, Connection: MNPS, 1-1/8 IN Thread Length, Flange Thickness: 5/16 IN, Third Party Certification: UL File Number E-11853, CSA

Category: Iron Chase Nipples

OZ-Gedney Type SLG Sealing Locknut, Material of Construction: Steel, Finish: Zinc Plated, 11/32 IN Height, 3-7/16 IN Width, Size: 2-1/2 IN, 8 Threads Per Inch, Third Party Certification: UL File Number E-11853, CSA AP57250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-408E, NEMA : FB-1, For Rigid Conduit And IMC

Category: Gasketed Conduit Locknuts

OZ-Gedney Type 4Q-T Liquid Tight 45 DEG Connector, Size: 3/4 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 1-1/2 IN Width, Dimension A

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

1 IN COND BODY ALUM C

Category: Type C Aluminum Conduit Bodies

OZ-Gedney Type FSC-2 Shallow Cast Device Box, Number Of Outlet: 2, Gray Iron, Size: 3/4 IN, Ridge Top Construction, Cable Entry: (2) 3/4 IN Hubs, 33.2 CU-IN Capacity, No, 4-11/16 IN Width, 2-3/8 IN Depth, 4-11/16 IN Height, Finish: Zinc Elec

Category: 2-Gang Malleable Iron FS & FD Device Boxes

OZ-Gedney Ground-Tite Type 4Q-L Grounding Liquid Tight 90 DEG Connector With Lug, Size: 1/2 IN, Connection: Compression X Tapered MNPT Hub, Conductor Range: 14 - 4 AWG, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA R

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type 4Q-T Liquid Tight 45 DEG Connector, Size: 1/2 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 1-1/4 IN Width, Dimension A

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Type 4Q-T Liquid Tight Straight Connector, Size: 1-1/2 IN, Connection: Compression X Tapered MNPT Hub, Malleable Iron Body And Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, 2-3/4 IN Width, 2 IN He

Category: Malleable Iron Liquidtight Flex Connectors

OZ-Gedney Type 24 Center Stopped Straight Squeeze Connector, Size: 1 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1-9/32 - 1-7/16 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-3/16 IN Length X 2-3/

Category: Straight Squeeze Flex Connectors

Conduit Offset Nipple, Type Offset, Threaded Male, Trade Size 1/2 Inch, Length 1-5/8 Inch, Material Zinc Plated Malleable Iron, Approval UL 514B, CSA C22.2, Used On Rigid Conduit/IMC, Applicable Standard NEMA FB-1

Category: Zinc Die Cast Offset Nipples

OZ-Gedney Type BJ Bonding Jumper, Size: 1/2 - 3/4 IN, Clamps: Malleable Or Ductile Iron, U-Bolts: Steel, Braids: Tinned Copper, Finish: Clamp And U-Bolt: Hot Dip Galvanized, 24 IN Fully Extended Braid, Third Party Certification: UL File Number

Category: Bonding Jumpers

OZ-Gedney Clamp Back, Size: 3 IN, 3/8 IN Thick, 1 Holes, Malleable Iron, Finish: Hot Dip Galvanized, Dimensions: 7-1/8 IN Length X 2-13/16 IN Width, 15/32 IN Hole, Dimension E: 5/8 IN X 1-1/8 IN, Third Party Certification: CSA 009795, Applicable Thir

Category: Clamp Backs - Iron

OZ-Gedney Type 14-S Pipe Strap, Steel, Finish: Zinc Plated, Mounting Holes O.C: 1-1/16 IN, 1/4 IN Mounting Hole Width, 1 Holes, 1/4 IN Width, Trade Size: 1/2 IN, Dimension A: 2-1/8 IN, Applicable Third Party Standards: Federal Specification FF-S-76

Category: Steel 1-Hole Conduit Straps

Liquidtight Grounding Connector, 90°, Insulated, Size: 2 Inch, Material/Finish: Malleable Iron/Zinc

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney BC-G Series Flat Top Design Cover, 3/4 IN Hub, Screw-In Mounting, Iron Body, Stainless Steel Screws, Finish: Hot Dip Galvanized, Gray, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL 514

Category: Iron Conduit Body Covers

Conduit Hardware, Bushings, Insulating, Trade Size: 1 1/4 Inch, Material: Malleable Iron, Connection Type: Set-Screw, Maximum Temperature Rating: 150 Degree C, Features: For Rigid and IMC, With Bronze Lug, Outside Diameter: 2 1/8 Inch, Width: 5/8 Inch, Grounding Wire Size Minimum: 8 AWG

Category: Threadless Ground Bushings

2 IN ARMD/MC CBL CONN

Category: Single Barrel MC / AC Connectors

OZ-Gedney Ground-Tite Type 4Q-LT Grounding Liquid Tight Straight Connector With Lug, Size: 2-1/2 IN, Connection: Tapered MNPT Hub, Conductor Range: 1 - 4/0 AWG, Malleable Iron Body and Nut, Steel Ferrule, Finish: Zinc Electroplated, NEMA Rating: NEMA 4, Insulated Throat, Hazardous Location, 4-5/8 IN Width, 2.938 IN Height, 2-3/4 IN Turning Radius Gland Nut, Third Party Certification: UL File Number E-24264, CSA 9795, Applicable Third Party Standards: UL 467, CSA C22.2 No.41, Federal Specification W-F-406E, NEMA : FB-1, Class I, Division 2 Per NEC 501.4(B), Class I, Zone 2 Per NEC 505.15(C)(2), Class II, Division 1 Per NEC 502.4(A)(1)(e), Class II, Division 2 Per NEC 502.4(B)(2), Class III, Division 1 Per NEC 503.3(A)(2), Class III, Division 2 Per NEC 503.3(B), Intrinsically Safe Per NEC 504.20, For Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors

3 IN INSUL GNDG BSHG ALUM

Category: Threaded Ground Bushings

Rigid/IMC Conduit Pull Box End Fitting, Trade Size 1-1/4 Inch, Constructional Feature Weatherproof, Sleeve Trade Size 2 Inch, Diameter 2-7/8 Inch, Length 2-3/8 Inch, Approval UL 514B, End Unit Material Hot Dip Galvanized Malleable/Ductile Iron, Used On Rigid/IMC Metal Conduit, Includes Type A Insulating Bushing, (2) End Unit

Category: Iron Rigid Conduit Pull Box Fittings