Search results
3,845 Items found
OZ Gedney
Conduit Sealing Bushing, Size: 2-1/2", 1 to 4 Wire, Malleable Iron
Item #: 246458
CAT #: CSMC-250P
UPC: 783126009118
Company wide:
OZ Gedney
Conduit Bushing, Insulating, 6" MNPT, Threaded, Thermoplastic Phenolic
Item #: 1284940
CAT #: BB-600
UPC: 783126031331
Company wide:
OZ Gedney
Reducing Bushing, Threaded, 2 x 3/4 Inch, Malleable Iron
Item #: 14831
CAT #: RB-334
UPC: 783126467703
Company wide:
OZ Gedney
1 IN 90 DEG ELECTROFORM INSERT
Item #: 278420
CAT #: EFL-100
UPC: 783126120394
Company wide:
OZ Gedney
Reducing Bushing, Size 3/4 x 1/2", Material Aluminum
Item #: 42076
CAT #: RB-321A
UPC: 783126057157
Company wide:
OZ Gedney
Conduit Outlet Box, Type T, (3) 1/2" Hubs, Malleable Iron With Aluminum Cover
Item #: 24816
CAT #: GUAT-50
UPC: 783126247404
Company wide:
OZ Gedney
Single Receptacle Cover, 1- Gang, Opening: 1-5/8", Steel
Item #: 133666
CAT #: FS-1-LRCS
UPC: 783126211504
Company wide:
OZ Gedney
Liquidtight Connector With Wire Mesh Grips, Insulated, Size: 3/4"
Item #: 60269
CAT #: 4QG-75
UPC: 783126628609
Company wide:
OZ Gedney
1-1/2" Conduit Clamp, Parallel Type, Malleable Iron, Hot-Dipped Galvanized.
Item #: 346996
CAT #: UPC-150G
UPC: 783126554953
Company wide:
OZ Gedney
Flexible Coupling, 3/4" x 24" Long, Explosion-Proof
Item #: 161285
CAT #: ECGJH-75-24
UPC: 783126116670
Company wide:
OZ Gedney
Pulling Elbow, Threaded, 2 Inch, Malleable Iron
Item #: 13463
CAT #: FF-200
UPC: 783126152401
Company wide:
OZ Gedney
Reducing Bushing, Threaded, 4" x 2", Malleable Iron
Item #: 202518
CAT #: RB-351
UPC: 783126467925
Company wide:
OZ Gedney
Conduit Bushing, Insulating, 4", Threaded, Thermoplastic
Item #: 35306
CAT #: BB-400
UPC: 783126031270
Company wide:
OZ Gedney
Duplex Receptacle Cover, 1-Gang, Steel
Item #: 8450
CAT #: FS-1-DCS
UPC: 783126211108
Company wide:
OZ Gedney
Outlet Box, GUEB, (13) 3/4" Hubs, Aluminum
Item #: 200918
CAT #: GUEB13-75AN4
UPC: 783126111255
Company wide:
OZ Gedney
Conduit Bushing, Insulating, 3", Threaded, Thermoplastic
Item #: 35366
CAT #: ABB-300
UPC: 783126007213
Company wide:
OZ Gedney
Reducing Bushing, Size 1 x 3/4", Material Aluminum
Item #: 187860
CAT #: RB-322A
UPC: 783126057201
Company wide:
OZ Gedney
Conduit Sealing Bushing, Size: 2-1/2", 1 to 4 Wire, Malleable Iron
Conduit Sealing Bushing, Type: CSMC, Size: 2-1/2 Inch, 1 to 4 Wire, Material: Malleable Iron
Item #: 246458
CAT #: CSMC-250P
UPC: 783126009118
Category:
Rigid & IMC Bushings
Company wide:
OZ Gedney
Conduit Bushing, Insulating, 6" MNPT, Threaded, Thermoplastic Phenolic
Conduit Bushing, Insulating, 6 Inch MNPT, Threaded, Impact Resistant, Rated 150° Celsius, Thermoplastic Phenolic, For Use with Rigid/IMC Conduit
Item #: 1284940
CAT #: BB-600
UPC: 783126031331
Category:
Rigid & IMC Bushings
Company wide:
OZ Gedney
Reducing Bushing, Threaded, 2 x 3/4 Inch, Malleable Iron
Reducing Bushing, Threaded, 2 x 3/4 Inch, Malleable Iron, For Use With Rigid/IMC Conduit
Item #: 14831
CAT #: RB-334
UPC: 783126467703
Category:
Iron Alloy Reducing Bushings
Company wide:
OZ Gedney
1 IN 90 DEG ELECTROFORM INSERT
OZ-Gedney Type EFL Concrete Slab Electroform 90 DEG Conduit Insert, Size: 1 IN, Malleable Iron, Finish: Zinc Plated, Dimensions: 2-1/2 IN Base Diameter X 2-15/16 IN Base To Conduit Center X 3-11/16 IN Height, 3-13/16 IN Turning Radius, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA: C22.2 No.18, Federal Specification W-F-408E, For Concrete Slabs 6 IN Thickness And Up, Threaded Rigid Conduit And IMC
Item #: 278420
CAT #: EFL-100
UPC: 783126120394
Category:
Iron Rigid Conduit Elbows
Company wide:
OZ Gedney
Reducing Bushing, Size 3/4 x 1/2", Material Aluminum
Reducing Bushing, Size 3/4 x 1/2 Inch, Threaded, Aluminum, For Use With Rigid/IMC Conduit.
Item #: 42076
CAT #: RB-321A
UPC: 783126057157
Category:
Aluminum Reducing Bushings
Company wide:
OZ Gedney
Conduit Outlet Box, Type T, (3) 1/2" Hubs, Malleable Iron With Aluminum Cover
Conduit Outlet Box, Type T, (3) 1/2 Inch Hubs, 3 Inch Cover Opening, 13.500 Cubic Capacity, 3-5/8 x 2 x 3-5/8 Inch, Malleable Iron With Copper-Free Aluminum Cover
Item #: 24816
CAT #: GUAT-50
UPC: 783126247404
Category:
Explosion-Proof T Conduit Outlet Boxes
Company wide:
OZ Gedney
Single Receptacle Cover, 1- Gang, Opening: 1-5/8", Steel
Single Receptacle Cover, 1- Gang, Opening: 1-5/8 Inch, Steel
Item #: 133666
CAT #: FS-1-LRCS
UPC: 783126211504
Category:
Steel FS & FD Device Box Covers
Company wide:
OZ Gedney
Liquidtight Connector With Wire Mesh Grips, Insulated, Size: 3/4"
Liquidtight Connector With Wire Mesh Grips, Insulated, Straight, Size: 3/4 Inch, Material/Finish: Malleable Iron/Zinc
Item #: 60269
CAT #: 4QG-75
UPC: 783126628609
Category:
Liquidtight Connectors - Accessories
Company wide:
OZ Gedney
2 IN PRL TYPE COND
Oz-g Upc200g 2-in Para Type clamp
Item #: 302803
CAT #: UPC-200G
UPC: 783126555004
Company wide:
OZ Gedney
1-1/2" Conduit Clamp, Parallel Type, Malleable Iron, Hot-Dipped Galvanized.
Parallel Clamp, 1 1/2 inch, Material: Material: Steel, Finish: Hot-Dipped Galvanized.
Item #: 346996
CAT #: UPC-150G
UPC: 783126554953
Company wide:
OZ Gedney
Flexible Coupling, 3/4" x 24" Long, Explosion-Proof
Flexible Coupling, 3/4 Inch x 24 Inch Long, Explosion-Proof, Bronze End Fittings/Outer Braid, Maximum Temperature 300°F, For Use in Hazardous Locations to Isolate Conduit Systems From Vibration
Item #: 161285
CAT #: ECGJH-75-24
UPC: 783126116670
Category:
Explosion-Proof Type ECGJH Couplings
Company wide:
OZ Gedney
Pulling Elbow, Threaded, 2 Inch, Malleable Iron
Pulling Elbow, Threaded, Female / Female, 2 Inch, Malleable Iron, Rigid Conduit / IMC, With Gasket, 90°, UL, CSA, GASKETED - WATERTIGHT
Item #: 13463
CAT #: FF-200
UPC: 783126152401
Category:
Iron Rigid Conduit Elbows
Company wide:
OZ Gedney
Reducing Bushing, Threaded, 4" x 2", Malleable Iron
Reducing Bushing, Malleable, 4" x 2"
Item #: 202518
CAT #: RB-351
UPC: 783126467925
Category:
Iron Alloy Reducing Bushings
Company wide:
OZ Gedney
FS 2 GANG CAST BOX 1/2 IN HUB
OZ-Gedney Type FS-2 Shallow Cast Device Box, Number Of Outlet: 1, Gray Iron, Size: 1/2 IN, Ridge Top Construction, Cable Entry: (1) 1/2 IN Hub, 33.2 CU-IN Capacity, No, 4-11/16 IN Width, 2-3/8 IN Depth, 4-11/16 IN Height, Finish: Zinc Electroplated With Aluminum Enamel, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification A-A-50563, NEMA : FB-1, For Rigid Conduit And IMC
Item #: 327745
CAT #: FS250
UPC: 783126204124
Company wide:
OZ Gedney
3 IN ALUM CLOSE-UP PLUG
OZ-Gedney Type PLG Patented Threaded Insert Plug, Size: 3 IN, Copper-Free Aluminum, Connection: Threaded NPT, Body Thick: 1-1/4 IN, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Listed For Hazardous Location Use
Item #: 526997
CAT #: PLG300CA
UPC: 783126057096
Company wide:
OZ Gedney
Conduit Bushing, Insulating, 4", Threaded, Thermoplastic
Conduit Bushings, Threaded, 4 Inch, Thermoplastic, For Use With Rigid/IMC Conduit and to Insulate Cables Passing Through Metal Boxes or Troughs
Item #: 35306
CAT #: BB-400
UPC: 783126031270
Category:
Rigid & IMC Bushings
Company wide:
OZ Gedney
FDC 1 GANG CAST BOX 3/4 IN HUB
OZ-Gedney Type FDC Deep Cast Device Box, Number Of Outlet: 2, Gray Iron, Size: 3/4 IN, Ridge Top Construction, Cable Entry: (2) 3/4 IN Hubs, 28 CU-IN Capacity, No, 2-15/16 IN Width, 3-1/16 IN Depth, 4-11/16 IN Height, Finish: Zinc Electroplated With Aluminum Enamel, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification A-A-50563, NEMA : FB-1, For Rigid Conduit And IMC
Item #: 8511
CAT #: FDC175
UPC: 783126201369
Company wide:
OZ Gedney
1 GANG CVR DPLT RCPT WP
OZ-Gedney Type FS-1 Cast Device Box Cover With Lid, Die-Cast Aluminum, Finish: Aluminum Enamel, Number Of Outlet: (1) Duplex Receptacle, Device Box, Screw Mounting, No, Third Party Certification: UL File Number E-18095, CSA 009795, Applic
Item #: 48225
CAT #: FS-1-WDCA
UPC: 783126213003
Category:
Device Box Covers - Aluminum
Company wide:
OZ Gedney
BEAM CLAMP
OZ-Gedney Type IS Beam Clamp, Malleable Iron Clamp, Steel Screw, Hardened Case, 525 LB Maximum Load, 15/16 IN Maximum Jaw Opening, Finish: Clamp: Hot Dip Galvanized, Screw: Zinc Electroplated, Length: 1-1/2 IN, 5/16-18 Tapped Holes, 1-13/16 IN Heig
Item #: 195681
CAT #: IS-501
UPC: 783126310108
Category:
Beam Clamps - Adjustable
Company wide:
OZ Gedney
Duplex Receptacle Cover, 1-Gang, Steel
Features: 1 Gang, Application: Fs, Fd Boxes, Standard: Ul 514a, Csa C22.2, Fed Spec: A-a-50563, NEMA: Fb-1, Os-1, Material: Steel, Finish: Zinc-electroplated
Item #: 8450
CAT #: FS-1-DCS
UPC: 783126211108
Category:
Steel FS & FD Device Box Covers
Company wide:
OZ Gedney
Outlet Box, GUEB, (13) 3/4" Hubs, Aluminum
Conduit Outlet Box, Type GUEB, Square, (13) 3/4 Inch Threaded Hubs, Aluminum, For Rigid Conduit & IMC, Explosion-Proof, Hazardous Locations, (5) Plugs Provided, 29 cubic inches
Item #: 200918
CAT #: GUEB13-75AN4
UPC: 783126111255
Category:
Conduit Junction Boxes - Type GU
Company wide:
OZ Gedney
Conduit Bushing, Insulating, 3", Threaded, Thermoplastic
Conduit Bushing, Insulating, 3 Inch, Threaded, Thermoplastic Phenolic, Rated 150° Celsius, For Use With Rigid/IMC Conduit
Item #: 35366
CAT #: ABB-300
UPC: 783126007213
Category:
Rigid & IMC Bushings
Company wide:
OZ Gedney
Reducing Bushing, Size 1 x 3/4", Material Aluminum
Reducing Bushing, Size 1 x 3/4 Inch, Aluminum, For Use With Rigid/IMC Conduit
Item #: 187860
CAT #: RB-322A
UPC: 783126057201
Category:
Aluminum Reducing Bushings
Company wide:
OZ Gedney
Bonding Locknut, 1-1/2" Steel
1-1/2 Inch Mall Ground Locknut
Item #: 328872
CAT #: 105
UPC: 783126750201
Category:
Steel Conduit Locknuts
Company wide:
3,845 Items found