Search results

1-1/4 IN 90 DEG CONN LFMC

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Grounding Hub, Insulated, 1 Inch, Gasketed, Watertight, Malleable Iron, For Use With Rigid/IMC Conduit

Category: Malleable Iron Conduit Hubs With Grounding

Grounding Bushing, 3/4",Threadless, Insulated, Set-Screw Connection Type, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 4 AWG, Steel Clamping/Set Screws, Rated 150°Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threadless Ground Bushings

Reducing Bushing, 2 x 1/2 Inch, Malleable Iron, For Use With Rigid/IMC Conduit

Category: Iron Alloy Reducing Bushings

OZ-Gedney Type FS-2 Cast Device Box Cover, Steel, Finish: Zinc Electroplated, Number Of Outlet: (2) Duplex Receptacle, Device Box Mounting, No, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards

Category: Steel FS & FD Device Box Covers

OZ-Gedney Type UNF Conduit Union, Trade Size: 1/2 IN, 1-1/2 IN Outside Diameter, Length: 1-3/4 IN, Flexibility: RMC And IMC, Steel, Connection: Tapered FNPT, Third Party Certification: UL File Number E-34997 Listed For Class I, Division 1, 2, Grou

Category: Explosion-Proof Type UNF Unions

Conduit Clamps, Rigid/IMC, 1 Inch, Type: UEC-G Edge Type, For Use with Rigid Conduit Only, Malleable Iron

Category: Malleable Iron EMT Edge Type K-Clamps

Conduit Body, Type: TB, FM7, Size: 1/2 Inch Hub, Length: 5-5/8 Inch, 1-9/16 Inch Width, 2-5/8 Inch Height, Iron, Finish: Zinc Electroplated With Aluminum Enamel, Gray, Connection: Tapered FNPT, Cubic Inches: 6

Category: Type TB Iron Conduit Bodies

Puling Elbow, 90°, Female/Female, Size: 1-1/2", Raintight, Material/Finish: Malleable Iron/Zinc

Category: Iron Rigid Conduit Elbows

Wedge Anchor, 1/4 x 1-3/4 Long, Order of 1 Each = Pack of 100

Category: Malleable Iron EMT Parallel Type K-Clamps

Grounding Bushing, Specification Grade, 2 Inch, Threaded, Insulated, Aluminum Body and Copper Lay-In Lug 14 - 4 AWG, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Swivel Ground Hub, 4/0 AWG - 500 MCM, 1-1/4 Inch Hub, Malleable Iron, For Use With Universal Ground Clamps To Connect Grounding Conductors Run Bare, In Armor Or In Conduit

Category: Ground Clamps With Hub

Gold Seal Strain Relief Connector, Straight, Cord Range: 1.000 Inch - 1.200 Inch, Hub: 1 Inch, Material/Finish: Malleable Iron.

Category: Straight Malleable Iron Cord Grips

3" Pull Box Fittings, Weatherproof, Malleable Iron End Units, Includes: Copper Ground, Pressure Ring, and Type A Insulating Bushing. For Use with Rigid/IMC Conduit.

Category: Iron Rigid Conduit Pull Box Fittings

Conduit Bushing, Insulating, 2-1/2 Inch, Threaded, Thermoplastic Phenolic, Rated 150° Celsius, For Use With Rigid/IMC Conduit

Category: Rigid & IMC Bushings

Conduit Bushings, Type: Capped, Trade Size: 1-1/4 Inch, material: Malleable Iron/Zinc, For Use With Rigid/IMC Conduit

Category: Capped Bushings

Conduit Bushings, Type: Capped, Trade Size: 1 Inch, Material: Malleable Iron/Zinc, For Use With Rigid/IMC Conduit

Category: Capped Bushings

OZ-Gedney Type PLG Internal Recessed Threaded Insert Plug, Size: 1-1/4 IN, Copper-Free Aluminum, Connection: Threaded NPT, Body Thick: 3/4 IN, 3/4 IN Socket Size, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Li

Category: Explosion-Proof Recessed Head Close-Up Plugs

OZ-Gedney Type EY Vertical Sealing Fitting, Size: 2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 2-3/4 IN Body Diameter X 6-1/4 IN Overall Length, 3-5/8 IN Turning Radius, 15 OZ Sealing Compound Required, 1 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC

Category: Explosion-Proof Female Vertical Sealing Fittings

Explosion-Proof Conduit Body, Type: LB, Size: 1/2", Material: Malleable Iron. Includes: Cover & Gasket.

Category: Explosion-Proof Type LB Conduit Bodies

OZ-Gedney Type AC 90 DEG Center Stopped Squeeze Connector, Size: 2-1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 2-3/4 - 3 IN, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, 7/8 IN Thread Length, Dimension A: 6-1/4

Category: 90 Degree Two Screw Squeeze Flex Connectors

Oz-g 103 1-in Mall Grnd Lknut

Category: Steel Conduit Locknuts

OZ-Gedney Type FS-2 Blank Flat Cast Device Box Cover, Steel, Finish: Zinc Electroplated, Device Box, Screw Mounting, No, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No

Category: Steel FS & FD Device Box Covers

OZ-Gedney Type PLG Internal Recessed Threaded Insert Plug, Size: 2 IN, Copper-Free Aluminum, Connection: Threaded NPT, Body Thick: 3/4 IN, 1 IN Socket Size, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Listed F

Category: Explosion-Proof Recessed Head Close-Up Plugs