Search results

Grounding Bushing, 1",Threadless, Insulated, Set-Screw Connection Type, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 4 AWG, Steel Clamping/Set Screws, Rated 150°Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threadless Ground Bushings

AC/MC/Flex Connector, 90 Degree, Insulated, Type: Squeeze, Size: 2 Inch, Malleable Iron, For Use With Armored and Flexible Metal Conduit

Category: 90 Degree Two Screw Squeeze Flex Connectors

Conduit Bushings, Insulated, Size: 1 1/4 Inch, Material: Malleable Iron, Connection Type: Threaded, Maximum Temperature Rating: 150° Celsius, For Use With Rigid/IMC Conduit.

Category: Rigid & IMC Bushings

OZ-Gedney BS-S Series Domed Top Design Cover, 1/2 IN Hub, Screw-In Mounting, Pre-Galvanized Stamped Steel, Stainless Steel Screws, Finish: Natural, Third Party Certification: UL File Number E-18095, CSA LR-9795, Applicable Third Party Standards: UL

Category: Steel Conduit Body Covers

Liquidtight Connector, 90°, 3/4 inch, Insulated Throat, Material: Malleable Iron

Category: 90 Degree Malleable Steel Liquidtight Flex Connectors

Liquidtight Connector, 45°, 1-1/2", Malleable Iron, For Metallic Liquidtight Conduit, UL 514-B, CSA C22.2, APPLICABLE STANDARD FEDERAL SPECIFICATION WF-406E, NEMA; APPLICATION HAZARDOUS LOCATION; ENVIRONMENTAL CONDITIONS OIL TIGHT

Category: 45 Degree Malleable Steel Liquidtight Flex Connectors

OZ-Gedney Reducing Washer, Steel, Finish: Pre-Galvanized Zinc, 3 IN Outside Diameter, 1.73 IN Inside Diameter, 2 X 1-1/4 IN Conduit, Third Party Certification: UL File Number E11857, CSA 057250, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, NEMA : FB-1, For Used To Reduce The Size Of A Knockout Or Slip Hole

Category: Reducing Washers

OZ-Gedney Type KC Center Stopped 2-Screw Clamp Connector, Size: 1/2 IN, Connection: Male NPS Hub X Screw Clamp, Conductor Range: 1/2 - 29/32 IN, Malleable Iron, Finish: Zinc Electroplated, Dimensions: 1-9/16 IN Length X 1-7/8 IN Width, Third Party C

Category: Straight Squeeze Flex Connectors

Grounding Bushing, Insulated, Size: 3 Inch, Material: Malleable Iron, Lug: Aluminum, Threaded, Maximum Temperature Rating: 150° Celsius, For Use With Rigid/IMC Conduit, With Aluminum Lug, Outside Diameter: 4 1/16 Inch, Width:1 5/16 Inch, Grounding Wire Size Minimum: 14 Wag

Category: Threaded Ground Bushings

OZG RB-327A RB AL 1-1/2 T0 1-

Category: Aluminum Reducing Bushings

OZG 4Q-9400LT 4" 90D CN LFMC

Conduit Body, Type C, 2 Inch Diameter, Spec 5, Malleable Iron With Zinc Finish

Category: Type C Iron Conduit Bodies

Features: 324 Cubic In, (3) 500 Mcm Conductor, Tapered Threaded Hub, Application: Rigid Conduit, Imc, Standard: Ul 514a, Csa C22.2, Fed Spec: A-a-50563, NEMA: Fb-1, Fb-2.10, Hub Size: 4in, Form: Lb, Length: 16.75in, Width: 5.625in, Material: Malleable Iron, Finish: Zinc Electroplated Aluminum Enamel

Category: Type LB Iron Conduit Bodies

Rigid Split Coupling, Bolt-On, 3 Inch, Malleable Iron, Concrete Tight, Neoprene Gasket, For Use with Rigid/IMC Conduit

Category: Iron Rigid Conduit Bolt-On Couplings

Split Coupling, 3/4"

Category: Iron Rigid Conduit Bolt-On Couplings

OZ-Gedney Type FS-1 Blank Flat Cast Device Box Cover, Gray Iron, Finish: Zinc Electroplated, Device Box, Screw Mounting, No, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 N

Category: Device Box Covers - Iron

Conduit Body, Type: LB, Size: 1 Inch, Form 85, Includes Cover and Gasket, Material: Aluminum, For Use With Rigid/IMC Conduit

Category: Type LB Aluminum Conduit Bodies

Grounding Bushing, 3 Inch, Threaded, Insulated, Malleable Iron Body/Zinc Plated, Aluminum Lug 6 AWG - 250 MCM, Rated 150° Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threaded Ground Bushings

Conduit Body, Type: TB, Size: 1 Inch, Spec 5, Material: Malleable Iron, For Use With Rigid/IMC Conduit

Category: Type TB Iron Conduit Bodies

Grounding Bushing, 1-1/4",Threadless, Insulated, Set-Screw Connection Type, Malleable Iron Body/Zinc Plated, Aluminum Lug 14 - 4 AWG, Steel Clamping/Set Screws, Rated 150°Celsius, UL Listed For CU/AL Conductors, For Use With Rigid/IMC Conduit

Category: Threadless Ground Bushings

Cord Grip Connector, 1/2 Inch, Straight, Strain Relief, Cord Range: 0.312 to 0.375 Inch, Aluminum

Category: Straight Aluminum Cord Grips

OZ-Gedney Spec 5 Type T Conduit Body, Cover And Gasket Assembly, 1 IN Hub, Length: 7-1/8 IN, 2 IN Height, Conduit Body: Malleable Iron, Cover: Type BS Steel Zinc Electroplated, Gasket: Type SGN Neoprene, Finish: Aluminum Enamel, Connection: Tapere

Category: Type T Iron Conduit Bodies

OZ-Gedney Type LR Conduit Body, 2 IN Hub, Length: 10-5/8 IN, 3-1/2 IN Height, Malleable Iron, Finish: Zinc Electroplated With Aluminum Enamel, Connection: Tapered FNPT, 3 (2/0 AWG) Conductors, 70 CU-IN Volume, Third Party Certification: UL File Num

Category: Type LR Iron Conduit Bodies

Liquidtight Grounding Connector, Straight, 5 Inch, 1 - 4/0 AWG, Malleable Iron, For use With Liquidtight Flexible Metal Conduit

Category: Malleable Iron Liquidtight Flex Connectors