Search results

OZ-Gedney Type HB Insulated Bushing, Size: 2-1/2 IN, Malleable Iron, Finish: Hot Dip Or Mechanically Galvanized, Connection: Threaded, 150 DEG C, 3-1/4 IN Outside Diameter, 1 IN Width, Third Party Certification: UL File Number E-11853, CSA 011584,

OZG LR6X-100MG 1" LR MOGUL CO

OZG FSK-20-213 TW ENT SE

OZG T350A 3-1/2" AL T COND BO

FDC 1 GANG CAST BOX 1 IN HUBS

OZG T300A 3" ALUM T COND BODY

OZG NEPMCRC PUSHBUTTON MUSH M

OZG R-2501-BO TYPE R 2-1/2" C

OZG EYDM-150 1-1/2 M/F SEAL F

Oz-g 8-150 1-1/2 90d Mall short Ell

Rigid Conduit Body, Access Opening Left Side, Configuration LL, Hub Location 90 Deg, Number of Hubs 2, Hub Size 3-1/2 Inch, Size 16-5/8 Inch L x 5-1/4 Inch H, Installation Threaded, Material Sand Cast Enameled Copper Free Aluminum, Approval UL 514A, CSA C22.2, Used On Rigid Conduit/IMC, Applicable Standard Federal Specification A-A-50563, NEMA FB-1/FB-2.10, Capacity 292 Cu Inch

OZG LB6X300AQC ALUM MOGUL CONDUIT BODY

Service Entrance Cable Cap, Type Split Insulator, Wire Size (3) 4/0 AWG, Number of Holes 4, Hole Size (1) 7/16 Inch/(3) 7/8 Inch, Size 3-1/2 Inch L x 3-3/4 Inch W x 3-29/32 Inch H, Material Hot Dip/Mechanically Galvanized Malleable Iron, Approval UL 514B, CSA, Used On Cable Service Entrance, Constructional Feature Weather Resistant, Insulation Material Phenolic

OZ-Gedney Type EX Expansion Fitting, Trade Size: 1 IN, 2-3/8 IN Outside Diameter, Length: 11-3/4 IN, Flexibility: RMC And IMC, Head: Malleable/Ductile Iron, Sleeve: Steel, Insulating Bushing: Phenolic, Third Party Certification: UL File Number E-11

2-1/2 IN 90 DEG COR ELB

2-1/2 IN PIPE GND CONN

Through Wall/Floor Sealing Assembly, Constructional Feature Watertight, Corrosion Resistant, Trade Size 3 Inch (Conduit/Steel Pipe), Outer Diameter 3.5 Inch (Conduit/Steel Pipe), Wall Thickness 4-3/8 to 14 Inch, Material Hot Dip Galvanized Alkyd Enamel Coating Malleable/Ductile Iron (Body), PVC Coated Steel (Pressure Ring), Neoprene (Grommet), Used On Sealing Around Conduit, Pipe/Tubing Passing Through a Wall or Floor, Includes Grommet, Ring, Sleeve, (4) Clamp Screw

Conduit Hardware, Bushings, Insulating, Trade Size: 1 1/4 Inch, Material: Malleable Iron, Connection Type: Threaded, Maximum Temperature Rating: 150 Degree C, Features: For Rigid And Imc, With Bronze Lug, Outside Diameter: 2 1/8 Inch, Width: 5/8 Inch, Grounding Wire Size Minimum: 8 Awg

Rigid/IMC Conduit Pull Box End Fitting, Trade Size 3 Inch, Sleeve Trade Size 4 Inch, Diameter 5-1/16 Inch, Length 3-1/8 Inch, Approval UL 514B, End Unit Material Hot Dip Galvanized Malleable/Ductile Iron, Used On Rigid/IMC Metal Conduit, Includes Type A Insulating Bushing, (2) End Unit

Liquidtight Flexible Conduit Connector, Type 45 Deg Male, Throat Type Insulated with Ground Lug, Trade Size 3/8 Inch, Material Zinc Electroplated Malleable Iron Body/Nut, Zinc Electroplated Steel Ferrule, Approval UL, CSA, Used On Flexible Metallic Liquidtight Conduit, Wire Size 14 to 4 AWG

Armored/Metal Clad Cable Terminator, Trade Size 2-1/2 Inch, Cable Type Jacketed Metal Clad Cable, Cable Size 2.73 to 3 Inch, Diameter 4-5/8 Inch, Length 5-1/4 Inch, Material Zinc Plated Malleable Iron/Ductile Iron, Application Wet Location, Approval UL 514B, CSA C22.2, Applicable Standard W-F-406B, Cable Core Diameter 2.43 Inch

OZG M-1520-BO CBL SUP BODY ON

OZG KC-500 5 IN 2 SCREW CONN

OZG 4Q-125WM 1-1/4" STR CN LF