Search results

OZ-Gedney Type THR Pipe Strap, Steel, Finish: Zinc Plated, Mounting Holes O.C: 1-27/32 IN, 3/16 IN Mounting Hole Width, 2 Holes, 3/4 IN Width, Length: 2-5/16 IN, Trade Size: 3/4 IN, Third Party Certification: CSA 104691, Applicable Third Party Standards: CSA C22.2 No.18, Federal Specification FF-S-760, For Supporting Rigid Conduit And IMC

Pipe Ground Connector, Conductor Size 8 to 4 AWG, IPS Size 3 Inch, Size 4-3/4 Inch W x 7/8 Inch D x 4-13/16 Inch H, Installation U Bolt to Pipe, Cable Clamp, Material High Strength Copper Alloy Body, High Strength Silicon Bronze Hardware, Approval UL 467, CSA C22.2, Used On (1) Cable Parallel or 90 Deg to Pipe, Applicable Standard W-F-406E

OZG EY-50A 1/2 AL VERT SEAL F

OZG NESS31MNL

OZG EYAX-300 3" HOR/VERT SEAL

OZG UB6X-300M 3" MOGUL IRON C

Conduit Hanger, Type Conduit Hanger with Carriage Bolt and Nut, Trade Size 2-1/2 Inch, Installation Carriage Bolt with Nut, Conduit Type 2-1/2 Inch IMC/EMT/Rigid, Material Steel, Finish Zinc Plated, Size 1-1/4 Inch D x 4-7/32 Inch H, Mounting Hole Size 5/16 Inch (Bolt)

Oz-g 1-350 3-1/2 Mall Locknut

Cast Device Box, Height 6.31 Inch, Width 2.81 Inch, Depth 2 Inch, Capacity 18 Cu Inch, Number of Gangs 1, Number of Hubs 4, Hub Location (1) Each Side, (1) Each End, Hub Size 1/2 Inch, Material Zinc Electroplated/Dichromate/Epoxy Powder Coated Malleable Iron, Shape Shallow, Configuration Type FSX, Mounting Hardware Not Included, Approval UL 514A, CSA C22.2

Liquidtight Flexible Conduit Connector, Type Straight Male, Throat Type Insulated, Trade Size 3 Inch, Material Galvanized Malleable Iron Body, Zinc Electroplated Steel Ferrule, Approval UL 514B, CSA C22.2, Used On Flexible Metallic Liquidtight Conduit, Applicable Standard Federal Specification WF-406E, NEMA, Size 4-7/8 Inch Dia

2-1/2 IN 90 DEG COR ELB

2-1/2 IN PIPE GND CONN

Through Wall/Floor Sealing Assembly, Constructional Feature Watertight, Corrosion Resistant, Trade Size 3 Inch (Conduit/Steel Pipe), Outer Diameter 3.5 Inch (Conduit/Steel Pipe), Wall Thickness 4-3/8 to 14 Inch, Material Hot Dip Galvanized Alkyd Enamel Coating Malleable/Ductile Iron (Body), PVC Coated Steel (Pressure Ring), Neoprene (Grommet), Used On Sealing Around Conduit, Pipe/Tubing Passing Through a Wall or Floor, Includes Grommet, Ring, Sleeve, (4) Clamp Screw

OZ-Gedney Type EX Expansion Fitting, Trade Size: 1 IN, 2-3/8 IN Outside Diameter, Length: 11-3/4 IN, Flexibility: RMC And IMC, Head: Malleable/Ductile Iron, Sleeve: Steel, Insulating Bushing: Phenolic, Third Party Certification: UL File Number E-11

Rigid Conduit Body, Access Opening Left Side, Configuration LL, Hub Location 90 Deg, Number of Hubs 2, Hub Size 3-1/2 Inch, Size 16-5/8 Inch L x 5-1/4 Inch H, Installation Threaded, Material Sand Cast Enameled Copper Free Aluminum, Approval UL 514A, CSA C22.2, Used On Rigid Conduit/IMC, Applicable Standard Federal Specification A-A-50563, NEMA FB-1/FB-2.10, Capacity 292 Cu Inch

Conduit Hardware, Bushings, Insulating, Trade Size: 1 1/4 Inch, Material: Malleable Iron, Connection Type: Threaded, Maximum Temperature Rating: 150 Degree C, Features: For Rigid And Imc, With Bronze Lug, Outside Diameter: 2 1/8 Inch, Width: 5/8 Inch, Grounding Wire Size Minimum: 8 Awg

OZG LB6X300AQC ALUM MOGUL CONDUIT BODY

Service Entrance Cable Cap, Type Split Insulator, Wire Size (3) 4/0 AWG, Number of Holes 4, Hole Size (1) 7/16 Inch/(3) 7/8 Inch, Size 3-1/2 Inch L x 3-3/4 Inch W x 3-29/32 Inch H, Material Hot Dip/Mechanically Galvanized Malleable Iron, Approval UL 514B, CSA, Used On Cable Service Entrance, Constructional Feature Weather Resistant, Insulation Material Phenolic

Rigid/IMC Conduit Pull Box End Fitting, Trade Size 3 Inch, Sleeve Trade Size 4 Inch, Diameter 5-1/16 Inch, Length 3-1/8 Inch, Approval UL 514B, End Unit Material Hot Dip Galvanized Malleable/Ductile Iron, Used On Rigid/IMC Metal Conduit, Includes Type A Insulating Bushing, (2) End Unit

Conduit Hardware, Bushings, Insulating, Trade Size: 1/2 Inch, Material: Malleable Iron, Connection Type: Set-Screw Threadless, Maximum Temperature Rating: 150 Degree C, Features: For Rigid and IMC, Outside Diameter: 1 3/16 Inch, Width: 1/2 Inch

OZG YE-101006 CAST IRON JUNCT

OZ-Gedney Type C Mogul Conduit Body, 1-1/4 IN Hub, Length: 12 IN, 2.38 IN Width, 3.31 IN Height, Malleable Iron, Finish: Triple coat: Zinc Electroplated, Dichromate, Epoxy Powder Coat, Connection: Tapered FNPT, 50 CU-IN Volume, Third Party Certification: UL File Number E-18095, CSA 009795, Applicable Third Party Standards: UL 514A, CSA C22.2 No.18, Federal Specification Number A-A-50563, Hazardous Locations: Class 1, Division 2, Per NEC section 501-4(B), NEMA : FB-1, FB-2.10, For Rigid Conduit And IMC

Liquidtight Flexible Conduit Connector, Type 45 Deg Male, Throat Type Insulated with Ground Lug, Trade Size 3/8 Inch, Material Zinc Electroplated Malleable Iron Body/Nut, Zinc Electroplated Steel Ferrule, Approval UL, CSA, Used On Flexible Metallic Liquidtight Conduit, Wire Size 14 to 4 AWG

Retrofit Cable Support, Type Multiple Segment Plug, Split, Body Type Tapered, Conduit Type Rigid/IMC, Conduit Position Vertical, Conductor Size 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 KCMIL (Aluminum/Copper Clad Aluminum/Copper), Conduit Size 1-1/2 Inch, Cable Type Non-Armored, Number of Conductors 1 to 4 (Same Size), Size 2-5/8 Inch Dia x 2 Inch H, Material Molded Canvas Bakelite (Body), Zinc Plated Steel (Band), Stainless Steel (Bolt/Nut), Application Indoor, Approval UL 514B, CSA C22.2, With pOZi-grip R-Style Wedging Plug