Search results

Plasti-bond Unf Unions Are Used To Connect Conduit To Conduit Or To Allow For Future Changes To The Conduit System. Female Threads Are Provided At Each End. Plasti-bond Uny Unions Are Used To Connect Conduit To A Conduit Fitting, Junction Box, Or Device Enclosure. One End Is A Male Thread And The Other Is Female.

Category: PVC Coated Female-Female Unions

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduit subject To Longitudinal Movement, Including That Caused In Long Runs By Thermal expansion And Contraction.

Category: PVC Coated Type X Conduit Bodies

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduitsubject To Longitudinal Movement, Including That Caused In Long Runs By Thermalexpansion And Contraction.

Category: PVC Coated Expansion Couplings

Rob-r Prxjg74 2-1/2 Expansion

Category: PVC Coated Expansion Couplings

Plasti-bond Xjg Type Expansion Joints Are Used To Connect Two Lengths Of Conduitsubject To Longitudinal Movement, Including That Caused In Long Runs By Thermalexpansion And Contraction.

Category: PVC Coated Expansion Couplings

3 Mall 1 Hole Pipe Strap

Category: PVC Coated 1-Hole Conduit Straps

Rob-r Pbds23sa Fs/fd Al 1 Gan

Category: PVC Coated FS & FD Device Box Covers

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs

ROB PRLB39 1 AL MARK 9 LB FITTING

Category: PVC Coated Type LB Conduit Bodies

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PRNIP-AL-1-1/4X8 1-1/4X8 AL NIPPLE

Category: PVC Coated Nipples

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB PBRA-3-1/2 3-1/2 RA BEAM CLAMP W/COATED STEEL U-BOLT

Category: PVC Coated Right Angle Beam Clamps

ROB PRRE74 2-1/2 - 1-1/4 REDUCING BUSHING

Category: PVC Coated Reducing Bushings

ROB PRHNIP-4X5 4X5 NIPPLE

Category: PVC Coated Nipples

RRY PBPS55S-2 1-1/2 PIPE STRA

Category: PVC Coated 2-Hole Conduit Straps

ROB-ROY PRRE83 3-1 RED BUSH

Category: PVC Coated Reducing Bushings

Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage."

Category: Straight PVC Coated Type LT Connectors

ROB PRT889 3 AL MARK 9 T FITTING

Category: PVC Coated Type T Conduit Bodies

PVC Coated Malleable Elbow, 90°, Female to Female, Aluminum, 1-1/4 Inch

Category: 90 Degree PVC Coated Type LT Connectors

ROB PRGUAL14 1/2 GUAL BODY WITH AL COVER

Category: PVC Coated Explosion-Proof GUAL Conduit Outlet Boxes

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs with Ground

ROB PRREC43SA 1-1/4 - 1 AL REDUCING COUPLING

Category: PVC Coated Couplings

Plasti-Bond GUA series conduit outlet boxes are installed in hazardous location conduit systems to serve as pull and splice boxes, to change the direction of a conduit run, to connect runs of conduit, or to provide access to conductors. They are provided with covers as standard. Inquire about special covers to allow use to mount lighting fixtures or as sealing fittings. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Explosion-Proof GUAB Conduit Outlet Boxes