Search results

Rob-r Prhnip-2-1/2x3-1/2 2-1/

Category: PVC Coated Nipples

Threaded Conduit Nipple, 1/2 Inch x 5 Inch, Aluminum, For use with Rigid Threaded Conduit

Category: Aluminum IMC Conduit Nipples

Perma-Cote conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a

Category: PVC Coated Type T Conduit Bodies

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as w

Category: PVC Coated Nipples

PCP PM4Q9100T 1 90 LT CONNECTOR

Category: 90 Degree PVC Coated Type LT Connectors

DuraBoxx Series Mounting Foot Kit DL18127W – DL24168W

Category: Fiberglass Screw Cover Junction Boxes

Perma-cote Conduit Bodies With Covers Are Offered In Form 8 And Form 7 Styles, Each With Numerous Configurations To Provide A Complete Coated Conduit System. May Be Used To Make 90degree Bends, For Pull Outlets, To Provide For Taps Or Splices, To Act As A

Category: PVC Coated Type C Conduit Bodies

PVC Coated Conduit, 4" Diameter, 10 Foot Length, Hot-Galvanized Steel, 40 mil Gray PVC Exterior Coating, 2 mil Green Urethane Interior and Thread Coating.

Category: Straight PVC Coated Rigid Conduit

Perma-cote Pvc Coated Pipe Straps Are Used To Securely Mount Conduit To A Wall Or Other Structure For Support. They Are Available In Two Styles: A One-hole Malleable Iron Strap Or A Two-hole Stamped Steel Strap. Mounting Hardware Not Provided.

Category: PVC Coated Conduit Support Straps

PVC Coated 90° GRC Elbow, 1-1/2"

Category: PVC Coated Rigid Conduit Elbows

ROB PRT107SA 4 AL FORM 7 T FITTING

Category: PVC Coated Type T Conduit Bodies

ROB PRHELB-5X45 5X45 STANDARD ELBOW

Category: PVC Coated Rigid Conduit Elbows

ROB PRGUAL49 1-1/4 GUAL BODY WITH AL COVER

Category: PVC Coated Explosion-Proof GUAL Conduit Outlet Boxes

Plasti-Bond ST style knockout hubs are used to terminate conduit runs through the wall of a sheet metal electrical enclosure. They are available with or without grounding lug. STTB style hubs are "Through-Bulkhead" fittings used to pass conduit runs through firewalls or bulkheads up to 1/8" thick. STTTB style hubs perform the same function for unlimited wall thicknesses, (furnished without nipples).

Category: PVC Coated Conduit Hubs

ROB PRGUAX59SA 1-1/2 AL GUAX BODY W/COVER

Category: PVC Coated Explosion-Proof GUAX Conduit Outlet Boxes

ROB PRHNIP-3XCL 3XCLOSE NIPPLE

Category: PVC Coated Nipples

ROB PRLR789 2-1/2 AL MARK 9 LR FITTING

Category: PVC Coated Type LR Conduit Bodies

ROB PBPAR-3-1/2 3-1/2 PARALLEL BEAM CLAMP

Category: PVC Coated Parallel Beam Clamps

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: 90 Degree PVC Coated Type LT Connectors

PVC coated Mark 9 conduit bodies covers are offered separately for convenient maintenance or installation when the replacement of entire bodies are not necessary.

Category: PVC Coated Conduit Body Covers

ROB PBU-BOLT-2-1/2 2-1/2 COATED STEEL U-BOLT

Category: PVC Coated Conduit Support Straps

ROB PRGUAX26SA 3/4 AL GUAX BODY

Category: PVC Coated Explosion-Proof GUAX Conduit Outlet Boxes

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LB Conduit Bodies

Plasti-Bond conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a mounting outlet for wiring devices or lighting fixtures etc. Electrical continuity of the conduit system is maintained across assembled joints.

Category: PVC Coated Type LR Conduit Bodies