Search results

Robroy Prrec32 1-3/4 Red. Cou p.

Category: PVC Coated Couplings

Factory threaded nipples save you time and money in the field. Electrical continuity is maintained across assembled joints. The exteriors of certain short nipples are coated with urethane in lieu of PVC. This is dictated by the manufacturing process as well as assembly considerations.

Category: PVC Coated Nipples

ROB ROY PRHNIP3"X12" NIPPLE

Category: PVC Coated Nipples

Nipple, Size: 3/4 Inch, Length: 12 Inch, PVC Coated Ferrous Metal

Category: PVC Coated Nipples

Nipple, Diameter: 1 inch, Length: 4 inch, Material: PVC Coated Steel.

Category: PVC Coated Nipples

Reducing Bushing, Polyurethane Coated 1-1/4 Inch x 3/4 Inch, Material: Ferrous Metal

Category: PVC Coated Reducing Bushings

PCP PMEY-50 1/2 F/F SEALING FITTING

Category: PVC Coated Type EYS Sealing Fittings

ROB-R PRCPLG-AL-2-1/2 2-1/2 A

Category: PVC Coated Couplings

ROB PRFS12SA 1/2 AL FS BODY W/O COVER

Category: PVC Coated FS Device Boxes

Rob-r Prc989 3-1/2 Form 8 C F

Category: PVC Coated Type C Conduit Bodies

Plasti-bond Pulling Elbows Are Used At 90° Bends In Conduit Runs To Allowstraight Pulls At Bends, To Serve As Pull Outlets For Stiff Conductors, To Allowfor Service Entrance Into Buildings Or To Allow Conductor Entrance Into Motors.electrical Continuity Of The Conduit System Is Maintained Across Assembled Joints.

Category: PVC Coated Type LB Conduit Bodies

Rob-r Prsta4 1-1/4 Al Knockout

Category: PVC Coated Conduit Hubs

Corner Post Kit

Category: Enclosure Mounting Bracket Kits

Panel For Enclosure, 6" x 4", N Series, Fiber Glass

Category: Enclosure Back Panels

Disconnect mounting back plate to compliment our enclosures.

Category: Enclosure Back Panels

Disconnect mounting back plate to compliment our enclosures.

Category: Enclosure Back Panels

Perma-Cote conduit bodies with covers are offered in Form 8 and Form 7 styles, each with numerous configurations to provide a complete coated conduit system. May be used to make 90degree bends, for pull outlets, to provide for taps or splices, to act as a

Category: PVC Coated Type LR Conduit Bodies

1/2 Inch EMT 45 Degree Elbow

Category: EMT 45° Conduit Elbows

1-1/4 Form 7 Cover

Category: PVC Coated Conduit Body Covers

PCP PMST-4 1-1/4 KNOCKOUT HUB

Category: PVC Coated Conduit Hubs

"Plasti-Bond liquid tight connectors are used with liquid tight conduit to wire motors, transformers, processing equipment, pumps, etc. The flexible conduit and the PVC coated connector work together to seal out water and other corrosive liquids, protecting the conductors from damage.

Category: 90 Degree PVC Coated Type LT Connectors

PCP PMTB75 3/4 FORM 8 TB FITTING

Category: PVC Coated Type TB Conduit Bodies

PCP PMH0WBS MAX SIZE 1/2 CONDUIT

Category: PVC Coated Conduit Support Straps

PCP PMEY-75 3/4 F/F SEALING FITTING

Category: PVC Coated Type EYS Sealing Fittings