Search results

ADAPTER PLATE VISTA PT5 TO 880 BOX

8IN CORE-PREWIRED-For tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. Includes one (1) 8TS Tile Shim. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No device plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider, One (1) 8TS Tile Shim. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Black

WIR 511 511 2-IN 90D FLAT

SRV FTG (2) TELE PLTS 1IN

WIR G2010A1 2-5/8 ENTR END FTG

DUCT END CAP

WIR G4000C-5 STL RACEWAY COVER 5FT 4000 GRAY

WIR J190036WIREMOLDA ALUM RACEWAY

WORK SURFACE MOD POWER KITWMD WSMEDTC60SLSK SNGL WSM EN

2-GANG DEVICE BOX,2000 SERIES TYPE

AL FACE PLATE BLANK

EVO 8 AND 10 GANG FLR

TPP IVRY 2-15A DPLX 15FT.

EXTENSION RING ASSY-3IN

WIR WD10W350-SES SWEEP ELBOW

WMD 203UFD

160KA SPD 277/480V 3 PHASE WYE

WIR C112-6T SPEC TEE 12X6

WIR 2151 1G FLUSH-TYPE EXT ADPT

WIR T120ABC75 QUICK TAP SINGLE PHASETAP & FIXTURE HANGERS1,

WIR CP10-HLS 10INCH STL HORIZONAL ELBOW

REC ACTVN 1 IN PF CVR

8IN CORE-PREWIRED-For tile, wood and laminate concrete floor coverings. For use in 8" (203mm) diameter opening. Devices are recessed 3 1/4" (83mm) below floor surface. Die-cast aluminum cover assembly is available in the following powder coated finishes: (BK) black, (GY) gray, (NK) nickel, (BS) brass, and (BZ) bronze. Includes one (1) 8TS Tile Shim. INCLUDED: For Side Compartments: Two (2) proprietary 20A Duplex Receptacles installed. For Center Compartment: No device plates are provided. For Bottom Feed Compartment: One (1) 5BLH 1/2-Gang Blank Housing (Tunneling extends from the 5BLH to 575CHA so that power cables from the 20A duplex receptacle mounted on the left side of the poke-thru device are run into the junction box attached to the 575CHA.) Three (3) 1PTHA 1-Gang Pass-Through Housing Assembly, One (1) 575CHA 1/2-Gang 3/4" Conduit Housing Assembly (also includes junction box attached to the 3/4" conduit), One (1) 8DIV 8" Divider, One (1) 8TS Tile Shim. NOTE: UL Fire Classified for up to 2-hour rated floors. Receptacles can be wired as a standard or isolated ground device. Brass

Mounts DS4000 Series Raceway around wall offsets and columns with maximum offset depth of 9" (229mm). Minimum Offset: 3" (76mm). Maximum Offset: 9 3/4" (235mm). Designer Ivory