Search results

The CP-C.1 24/10.0 is a power supply from the CP-C.1 range. The primary switch mode power supply offers a wide range input of 85-264 V AC and 90-300 V DC, rated input voltage is 110-240 V AC. The rated output power is 240 W, rated output current is 10 A at an output voltage of 24 V DC. The output voltage is adjustable within a range of 22.5 to 28.5 V DC. The power supply provides a U/I output characteristic with a power reserve of up to 50 percent and allows parallel operation to increase capacity and to enable redundancy. Further features are: power factor correction acc. to EN 61000-3-2. Redundancy unit and buffer modules are available as accessories.

Category: DIN Mount Uninterruptable Power Supplies

ABB Single Pole Ovr Din Rail Surge Protection Device With A Surge Capacity Of 40 Kaand Maximum Voltage Of 320v

Category: DIN Rail Mount Surge Protection Devices

5 Amp, Power Supply, DIN Mount, Input Voltage: 85-264VAC 90-300VDC, IP20 Housing and Terminals, Hardwired 20-10 AWG, 240W Power Output

Category: DIN Mount Uninterruptable Power Supplies

3 Pole Ovr Din Rail Surge Protection Device With A Service Voltage Of 240/120v Split Phase, 208/120v Wye, A Maximum Discharge Current Of 40 Ka, And An Auxiliary Contact For Remote Monitoring

Category: DIN Rail Mount Surge Protection Devices

Abb; Surge Suppressor; Z; Amperage Rating: Nominal Discharge Current: 5 Kamp, Maximum Discharge Current: 15 Kamp, Operating Current: Less Than 0.1 Milamp; Voltage Rating: 120 Vac; Frequency Rating: 50 - 60 Hz; Short Circuit Rating: 200 Kamp; Response Time: Less Than 25 Ns; Operating Temperature: -40 To +176 Deg C; Enclosure: NEMA 1; Number Of Poles: 1; Wire Size: Solid: 14 - 4 Awg, Stranded: 14 -6 Awg; Color: Gray Ral 7035; Wire Strip Length: 0.5 In; Tightening Torque: 24.5in-lb; Replacement Cartridges: Phase: Ovrt215150cu; Maximal Altitude: 6562 Ft

Category: DIN Rail Mount Surge Protection Devices