Search results

3/4 Inch EMT Conduit, Steel, 10 Foot Length

Category: Straight Steel EMT Conduit

(2) 12 AWG Conductors and (1) 12 AWG Ground, NM-B, Solid Copper Conductor, 90°C Insulation, 600V, Yellow, 250 ft. Package, Non-Metallic Sheathed Cable

Category: 12 AWG NM-B

12/2 Copper Conductors with Ground, 600V, Interlocked Aluminum Armor, Solid, 250 ft. Coil. Wire Colors (120 Volt): Black, White, Green. O.D.: .460"

Category: Solid Conductor Aluminum Armored Cable

1/2 Inch EMT Conduit, Steel, 10 Foot Length

Category: Straight Steel EMT Conduit

12 AWG, THHN/THWN-2, Stranded Copper, 600V, White, 500 ft. Reel.

Category: 12 AWG Stranded Copper THHN

4 Inch Square Box, Welded, Metallic, 2-1/8 Inch Deep, Side Knockouts: (8) 1/2 Inch with (4) Eccentric, Bottom Knockouts: (2) 1/2 Inch Eccentric, Cubic Inches - 30.3

Category: 4" Square Metallic Boxes

4 Inch Square Cover, Blank, 0-Device, Cover, No Raise, Drawn, Metallic

Category: 4" Square Metallic Box Covers

4" Square Cover, 0-Device, Cover, No Raise, Drawn, Metallic.

Category: 4" Square Metallic Box Covers

3/8 inch, Snap-Tite Insulated Throat Zinc Die-Cast Connector - For AC/MC Cable Range .405 to .612

Category: Single Barrel MC / AC Connectors

Weatherproof Box, 1-Gang, Die Cast. Depth: 2". (3) 1/2" Threaded Outlets (1 in each end, 1 in back), Cubic Inches: 17.5". Includes: (2) Closure Plugs & Ground Screw. Gray, Box Quantity: 20

Category: 1-Gang Metallic Weatherproof Boxes

Mounting Bracket. 1-Gang, Low Voltage, Old Work, Non-Metallic. For use with Low Voltage Class 2 Applications. For Installations on Existing Construction. Includes: Swing Arms.

Category: Non-Metallic Old Work Mounting Brackets

7-Piece Screwdriver Set, Includes: Keystone (1/4", Shank Length: 4", Square), Keystone (1/4", Shank Length: 6"), Cabinet (3/16", Shank Length: 3"), Cabinet (3/16", Shank Length: 6"), Cabinet (1/4", Shank Length: 4"), Phillips (#1, Shank Length: 3"), Phill

Category: Screwdriver Sets

4" Square, Exposed Work Cover, Type: (2) Toggle Switch, 1/2" Raised, Drawn, Metallic. Cubic Inches: 7.3".

Category: 4" Square Metallic Box Covers

Conduit-Fitting and Reaming Screwdriver, Shank Length: 2-1/2", Overall Length: 7-1/2", Conduit Capacity: 1/2", 3/4", 1"

Category: Conduit Deburring Tools

6 Piece Drill/Tap Kit, Sizes: 6-32 - 1/4-20, Hex Shank Size: 1/4", Material Thickness: 10 GA

Category: Combination Drill / Tap Bit Kits

Slug Buster Knockout Punch Kit, Includes: Conduit Punches & (1/2" - 2" CONDUIT SIZES ) Hole Punches, Maximum Cutting Depth: 10 GA

Category: Knockout Kits with Ratchet Wrench