Search results

Fused Disconnect Switch. 30 Amp. Base and DIN Rail Mounted. 3-Pole. UL Fuse Type: Class J. 600V AC. Wire Size: 14 - 4 AWG. For use with 6 mm Shafts and Handles. Integral Lug Kit Included.

Category: Base & DIN Rail Mount Fusible Disconnect Switches

Pistol Handle Shaft. Size: 6 x 400 mm (15.75"). For use with Pistol Handles.

Category: Disconnect Switch Shafts

6.30 - 10.00 FLA (Full Load Amps). MMP, 600V Rated, Trip Class: 10. Type MS116. Includes: Short Circuit Protection and Phase Failure Detection, Small 45 mm Width.

Category: Manual Rotary Motor Controllers

Distribution Block, Single Primary/Multiple Secondary, 1-Pole, Line Side: (1) 16 AWG - 4 AWG, Load Side: (4) 16 AWG - 4 AWG, 600V, 85 Amps per Pole, IP20, DIN Rail Mount.

Category: Single Primary / Multiple Secondary Insulated Distribution Blocks

Snap-On End Section. Type: FEM6. Color: Gray. Thickness: 2,8 mm. Used with Terminal Block Type: M 2,5/5 except D, M 4/6 except D and G, M 4/6, M 4/6.H and M1, M 1,5/6.HH and ADV, MTC 6, M 6/8 and M 10/10, Package Qty = 20

Category: Terminal Block End Sections

Terminal Block, Feed Through, Screw Clamp, M 4/6, Gray, 600 Volt AC/DC, 30 Amp, 4 mm Block, 6 mm Spacing, DIN 1 - DIN 3, Wire Size: 22 - 10 AWG

Category: 4mm Feed Through & Ground Terminal Blocks

DIN Rail, Symmetrical, Slotted. DIN 3. Type: PR30 (TS 35/F6). Material: White Passivated Galvanized Steel. Length: 2 Meters. H x W: 7.5mm x 35mm.

Category: Symmetrical Slotted DIN Rail

Mounting Foot Kit (Qty 4), Bulletin A80 (Accessories -Misc.), Size/Dims: fits Concept Enc, Material/Finish: SS Type 304. ***Used to maintain UL and CSA for exterior mounting***

Category: Enclosure Mounting Bracket Kits

1 N.O. Contact Block, 30.5 mm, 600V Rated, Base Mount, Non-metallic, Standard Heavy-Duty, 10250T Series, Terminal Type: Pressure.

Category: 30mm Contact Blocks

2 N.O. Contact Block, 30.5 mm, 600V Rated, Base Mount, Non-metallic, Standard Heavy-Duty, 10250T Series, Terminal Type: Pressure.

Category: 30mm Contact Blocks

Vent Drain, 2 x 1.38 Inch, Material/Finish Polyester/Stainless Steel, For Use With Thermoelectric Dehumidifier.

Category: Enclosure Corrosion Inhibitors

Vent Drain, Size/Dims: 2" x 1.25", Material/Finish: Polyester/Gray. For use with Thermoelectric Dehumidifier.

Category: Enclosure Corrosion Inhibitors

Assembled Jumper Bar with IP20 Protection. 10 Pole. 32 Amp. Type: BJMI6. Used with 4 mm² Blocks.

Category: Terminal Block Jumper Bars

Pistol Handle. Handle Length: 3.1"/80 mm. Color: Black. Environmental Ratings: NEMA 1, 3R, 12, 4, 4X. Defeatable, Lockable. For use with 6 mm Shafts.

Category: Disconnect Switch Handles

30.5 mm, Heavy-Duty, Selector Switch Operator, Lever Type, Non-Illuminated, 3-Position, 60° Throw, Operating Mode: Maintained, Maintained, Maintained, Cam 3. NEMA Rating: 3, 3R, 4, 4X, 12, 13.

Category: 30mm Lever Selector Switches

2 N.C. Contact Block, 30.5 mm, 600V Rated, Base Mount, Non-metallic, Standard Heavy-Duty, 10250T Series, Terminal Type: Pressure.

Category: 30mm Contact Blocks