Search results

Deep Strut, Elongated Holes on Back, 1-5/8" Height, 1-5/8" Width, Pre-Galvanized Steel, 12 Gauge, Sold In Multiples of 10 Ft.

Category: Steel Strut with Elongated Holes

22.5 mm, Non-metallic, Selector Switch Operator, Black Bezel, Knob Type, Non-illuminated, Black, 2-Position, 90° Throw, Operating Mode: Maintained, Maintained. NEMA Rating: 1, 3R, 4, 4X, 12, 13. ***Must add Contact Block Holder***

Category: 22mm Knob Selector Switches

Pistol Handle Shaft. Size: 6 x 360 mm (14.17"). For use with Pistol Handles.

Category: Disconnect Switch Shafts

Standard Strut Strap, Diameter: 3/4", Material: Steel, Finish: Hot Dipped Galvanized.

Category: Strut Channel Rigid Conduit Clamps

Snap-On End Section. Type: FEM6. Color: Gray. Thickness: 2,8 mm. Used with Terminal Block Type: M 2,5/5 except D, M 4/6 except D and G, M 4/6, M 4/6.H and M1, M 1,5/6.HH and ADV, MTC 6, M 6/8 and M 10/10, Package Qty = 20

Category: Terminal Block End Sections

Terminal Block, Feed Through, Screw Clamp, M 4/6, Gray, 600 Volt AC/DC, 30 Amp, 4 mm Block, 6 mm Spacing, DIN 1 - DIN 3, Wire Size: 22 - 10 AWG

Category: 4mm Feed Through & Ground Terminal Blocks

DIN Rail, Symmetrical, Slotted. DIN 3. Type: PR30 (TS 35/F6). Material: White Passivated Galvanized Steel. Length: 2 Meters. H x W: 7.5mm x 35mm.

Category: Symmetrical Slotted DIN Rail

Wall Mount, Type 4X, Enclosure, Hinged, Solid Cover, Quick Release, Size/Dims: 8" x 6" x 4", Material/Finish: Fiberglass/Gray

Category: Fiberglass Hinged Cover Enclosures

1 N.O. & 1 N.C. Contact Blocks & Contact Block Holder. 22.5mm, 600V Rated, Front Mount, Non-Metallic. For use with: Pilot Devices, Pushbuttons & Selector Switches

Category: 22mm Front Mount Contact Blocks

30.5 mm, Heavy-Duty, Assembled Selector Switch, Knob Type, Non-Illuminated, 3-Position, 60° Throw, Operating Mode: Maintained, Maintained, Maintained, 600V Rated, 1 NO & 1 NC Series Connected Contacts. NEMA Rating: 3, 3R, 4, 4X, 12, 13. Includes: HOA Legend Plate.

Category: 30mm Knob Selector Switches

Timing Relay, 12-240 Volt, Compact DIN Rail Mount, TR Series, 7 Function Programmable, On/Off Delay

Category: DIN Rail Mount Timing Relays

8 Blade Socket, 12 Amp @ 300V. DIN/Panel Mount with Elevator Terminals.

Category: 8-Blade Mounting Sockets

30 AMP, 3-Pole, Heavy Duty Safety Switch, Non-Fusible, 600 VAC, 250 VDC, NEMA 3R. Enclosure Dims: H: 15.88", W: 8.13", D: 5.25".

Category: 3-Pole 600 Volt Non-Fused Heavy Duty Safety Switches

Fuse Holder Terminal Block. Compression Clamp. Type: M 4/8.SFL. Color: Gray. 600V/10A. Size: 4 mm Block, 8 mm Spacing. DIN 1 - DIN 3. Wire Size: 22 - 12 AWG. Includes: Neon Blown Fuse Indicator.

Category: 4mm Fuse Holder Terminal Blocks

Snap-On End Section. Type: FEM8S. Color: Gray. Thickness: 1,5 mm. Used with Terminal Block Type: M 4/8.SF, M 4/8.SN and M 4/8..

Category: Terminal Block End Sections

Pull Start - Push Stop - 1/2 Round Legend Plate, Size: Standard, Aluminum, Green/Red Field. For use with 10250T Series, 30mm Push-Pull Units.

Category: 30mm Pushbutton Legend Plates