Raceway - Non-Metallic

Office Furniture Raceway Coupler FittingCoupler fitting. For use with office furniture raceway, Office Beige.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Office Furniture Raceway Long Coupler FiLong coupler fitting (with base). Used to bridge office furniture raceway between panel sections. Can also be used to fill void left by spill-over fitting, when furniture partitions are reconfigured. Supplied with adhesive tape. Office Gray.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Backfeed fitting. Features breakouts to enter through the bottom of the fitting and maintains bend radius control with a removable, bend radius insert and channel separation.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Twin-70 raceway base, 10 foot length. Supplied with pre-punched mounting holes. 2' of cover needed for every 1' of Twin-70 base

Category: 2-Piece Non-Metallic Raceway

Fiber spool bracket, PVC, Gray, Each piece consists of two halves that snap into base of TG raceway. Provides method to contain one meter or more of fiber slack and acts as a strain relief while maintaining a minimum 32mm bend radius. Bracket separation can be adjusted to fit the length of slack required

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Right Angle Fitting / TG-70 Raceway, Non-Metallic, Off-White

Category: 2-Piece Non-Metallic Raceway Elbows

End Cap Fitting / TG-70 Series Raceway, Off-White

Category: 2-Piece Non-Metallic Raceway End Fittings

Tee fitting. Used to join sections of Twin-70 raceway at tee intersections, Off White

Category: 2-Piece Non-Metallic Raceway Tee Fittings

Tee divider insert for TG-70 Raceway

Category: 1-Piece Non-Metallic Raceway Tee Fittings

End cap fitting. Conduit breakouts of 1/2" for entry into raceway channel. Off White.

Category: 1-Piece Non-Metallic Raceway End Fittings

Wire retainer. Holds wires in place during installation.

Category: 2-Piece Non-Metallic Raceway Covers

Entrance End Fitting / TG-70 Raceway, Non-Metallic, Electric Ivory

Category: 2-Piece Non-Metallic Raceway End Fittings

Coupler Fitting / TG70 Series Raceway, Off-White, Minimum Bend Radius for High Performance Copper and Fiber Optic Cabling Systems per TIA/EIA 568-B and 569-B Requirements

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Transition fitting. Used to transition to T-70 raceway, Off White.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Outside corner fitting – non-adjustable. PVC, White, Used to join sections of TG raceway at inside corners.

Category: 1-Piece Non-Metallic Raceway Elbows

Fiber spool bracket, PVC, Gray

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Inside Corner Fitting / TG-70 Raceway, Non-Metallic, Off-White

Category: 2-Piece Non-Metallic Raceway Elbows

Raceway Tee Fitting, TG-70 Series Raceway, Non-Metallic, Office White

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Transition fitting from TG to T-45. Provides a tee transition from TG raceway to T-45 and LD series size 5 and 10. Use with RF5X3 reducer fitting to transition to LD series size 3.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Inside corner fitting. Used to join sections of TG raceway at inside corners. Fittings adjust from 85° to 135° to adapt to non-square corners.

Category: 1-Piece Non-Metallic Raceway Elbows

Backfeed Fitting, PVC, White, Allows Cable Entry Through The Back Of The T-70 Raceway

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Reducer fitting for LD raceway from size 10 to size 5. For use with LD5 and LD10 raceway. Off White

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Entrance end fitting for LD2P10 raceway. Breakouts for 1/2" and 3/4" diameter conduit. Off White.

Category: 1-Piece Non-Metallic Raceway End Fittings

Attaches to 4x4 channel and/or fittings to create a horizontal four way cross intersection. Accepts optional split cover FRFWCSC4YL.

Category: 1-Piece Non-Metallic Raceway Elbows