Search results

RACEWAY COVER IW 2M PK12

Category: 2-Piece Non-Metallic Raceway Covers

Office Furniture Raceway Snap-on VerticaSnap-on single gang vertical sloped communication faceplate. Accepts up to four PANDUIT® Mini-Com® Modules (not included). No additional mounting hardware required. TIA/EIA-606-B compliant.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Optional split cover for the outside vertical 45° angle fitting FROV454X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4 (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

Optional split cover for the 6x4 FiberRunner® to 4x4 FiberRunner® Reducer Fitting FRRF6FR4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4" (19mm) opening for easy access to add or remove cables.

Category: 2-Piece Non-Metallic Raceway Covers

Attaches to 12x4 channel and/or fittings to create a horiztonal four way cross intersection with two 12x4 exits. Accepts optional split cover FRWCSC12BL.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Outside corner fitting for use with LDPH5 and LDS5 raceway, White, ABS, Length 1.25 in.

Category: 1-Piece Non-Metallic Raceway Elbows

The FiberRunner® 4-Way Cross Channel Fitting is used in cable management to create a horizontal 4-way cross intersection with two 6 inch x 4 inch exits. It also attaches to 6x4 channels and/or fittings. The 4-way cross channel fitting accepts the optional split cover.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Twin-70 raceway base, 8 foot length. Supplied with pre-punched mounting holes. 2' of cover needed for every 1' of Twin-70 base.

Category: 2-Piece Non-Metallic Raceway

Adapter fits into universal breakout of DCEFX or RAEFX fittings. For use LD3, LDPH3, and LDS3 raceway, Off White, PVC, Length 0.81 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Tamper resistant two-channel, one-piece latching surface raceway, PVC, White, Supplied with factory applied adhesive tape, 10' length. Color: White. Sold by foot in increments of 10.

Category: 1-Piece Non-Metallic Raceway

Used to limit the bend of the fiber cable to 2 (50.4 mm) when exiting from 4x4 FiberRunner® Channel or a FiberRunner® Horizontal Tee, Black.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Attaches to 4x4 channel and/or fittings to create a 90° horizontal branch from straight horizontal runs. Accepts optional split cover FRTSC4BL.

Category: 1-Piece Non-Metallic Raceway Elbows

Attaches any 6x4 FiberRunner® Fitting or Channel to any 4x4 FiberRunner® Fitting or Channel. Accepts split cover FRRF6FR4SCYL.

Category: 1-Piece Non-Metallic Raceway Elbows

6 x 4 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Orange.

Category: 1-Piece Non-Metallic Raceway End Fittings

T-45 tee fitting insert.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Tee fitting for use with LDPH5 and LDS5 raceway, Electric Ivory, ABS, Length 2.58 in.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Attaches to 12x4 channel and/or fitting to create a 45° horizontal turn from a straight horizontal run. Accepts optional split cover FRH45SC12BL.

Category: 1-Piece Non-Metallic Raceway Elbows

The FiberRunner® QuikLock™ Coupler is a pre-assembled coupler designed to quickly join two sections of channel and/or fittings in a cable routing system. The coupler measures 12 inches x 4 inches. No tools are required for installation.

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Entrance end fitting. Conduit breakouts of 1/2", 3/4", 1", 1 1/4" and 1 1/2" for entry from ceiling or wall. Electric Ivory.

Category: 1-Piece Non-Metallic Raceway End Fittings

24 x 4 end cap fitting used for closing off open ends of the channel or fittings. No coupler required. Push-on installation, Orange.

Category: 1-Piece Non-Metallic Raceway End Fittings

Reducer fitting for LD raceway from size 10 to size 3. For use with LD3 and LD10 raceway. For in-line terminations, use with CF10

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Attaches to 6x4 channel and/or fitting to create a 45° upward angle from a straight horizontal run. Used with outside vertical 45° angle fitting FROV456X4YL to change level of a straight horizontal run. Includes split cover.

Category: 1-Piece Non-Metallic Raceway Elbows

Reducer fitting for LD raceway from size 5 to size 3. For use with LD5 and LD3 raceway. For in-line terminations, use with CF5, Off White, ABS, Length 0.85 in.

Category: 1-Piece Non-Metallic Raceway Connectors & Adapters

Base coupler fitting. Used to join sections of T-70 raceway base together. International Gray.

Category: 1-Piece Non-Metallic Raceway Tee Fittings