Search results

Tee fitting for use with LDPH5 and LDS5 raceway, Off White, ABS, Length 2.58 in.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

T-45 right angle fitting at 90° flat junction, White.

Category: 2-Piece Non-Metallic Raceway Elbows

Inside corner fitting. Used to join sections of Twin-70 raceway at inside corners. Electric Ivory.

Category: 2-Piece Non-Metallic Raceway Clips & Couplings

Tee fitting. Used to join sections of Twin-70 raceway at tee intersections, Electric Ivory.

Category: 2-Piece Non-Metallic Raceway Tee Fittings

Backfeed fitting insert. Removable and maintains bend radius control.

Category: 2-Piece Non-Metallic Raceway Connectors & Adapters

Panduct® type FS solid wall wiring duct, 1 W x 4 H, 6' length, PVC, light gray, no mounting holes.

Category: 2-Piece Non-Metallic Raceway

Raceway two-piece base and cover, TG-70, Off White, 8'

Category: 2-Piece Non-Metallic Raceway

Base coupler fitting. Each piece includes two base coupler halves for joining sections of TG-70 base together, 10 pc.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Inside corner fitting. Used to join cove raceway at inside corners. Maintains a minimum 1" bend radius of cabling.

Category: 1-Piece Non-Metallic Raceway Elbows

OFR20 Single Channel, Low Voltage VerticOffice furniture vertical raceway. One-piece single channel raceway used to connect OFR20

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Outside corner fitting for use with LDPH3 and LDS3 raceway, Electric Ivory, ABS, Length 1.05 in.

Category: 1-Piece Non-Metallic Raceway Elbows

Raceway Spill Over FittingSpill-over fitting. Allows transition from office furniture raceway run horizontally along partition wall to office furniture vertical raceway in one location. Adjustable fitting maintains 1in minimum bend radius of cabling and works with various panel wi

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

End cap fitting. Conduit breakouts of 1/2" for entry into raceway channel. Electric Ivory.

Category: 1-Piece Non-Metallic Raceway End Fittings

Attaches to 2x2 channel to create a 90° vertical drop from a horizontal run. Hinged door included. Accepts channel cover in conjunction with channel. Use QuikLock„¢ Coupler FBC2X2GL with HS2X2LG6 or H2X2LG6 channels. Use snap rivets NR2WH-L or bolts F14PN

Category: 1-Piece Non-Metallic Raceway Elbows

Installation tool for use with type LD5 raceway.

Category: 2-Piece Non-Metallic Raceway

Attaches to 2x2 channel to create a 90° vertical drop from a horizontal run. Hinged door included. Accepts channel cover in conjunction with channel. Use QuikLock„¢ Coupler FBC2X2BL with HS2X2BL6 or H2X2BL6 channels. Use snap rivets NR2WH-L or bolts F14PN

Category: 1-Piece Non-Metallic Raceway Elbows

Tamper resistant one-piece surface raceway. Supplied with pre-applied adhesive backed tape, White, PVC, Length 10.00 ft, Width 1.01 in.

Category: 2-Piece Non-Metallic Raceway

Outside corner fitting for use with LDPH3 and LDS3 raceway, White, ABS, Length 1.05 in.

Category: 1-Piece Non-Metallic Raceway Elbows

TG-70 raceway base, 10 meter lenght. Supplied with pre-punched mounting holes.

Category: 2-Piece Non-Metallic Raceway

OFR20 Single Channel, Low Voltage 1-piecOne-piece single channel low voltage raceway with adhesive tape backing for data cable routing along top of modular furniture partitions. Available in 8' lengths.

Category: 1-Piece Non-Metallic Raceway Elbows

PAN CFX10AW-X EIA/TIA LD/CD10

Category: 1-Piece Non-Metallic Raceway Clips & Couplings

Base coupler fitting. Used for joining sections of Twin-70 base together. Electric Ivory.

Category: 1-Piece Non-Metallic Raceway Tee Fittings

Tamper resistant one-piece surface raceway. Supplied with pre-applied adhesive backed tape, Off White, PVC, Length 10.00 ft, Width 1.01 in.

Category: 2-Piece Non-Metallic Raceway

Office Furniture Raceway, Non-Metallic, .88" x 1.71" x 6', Office Gray

Category: 1-Piece Non-Metallic Raceway