Meters & Testing

Voltage Tester With LED Flashlight, Non-Contact, Range 50-1000 Volt AC, Dust Tight And Water Proof, Audible Notification Disable, Auto Power Off, Low Battery Indication, UL Listed

Category: Voltage & Continuity Testers

Split Jaw Digital Fork Meter, UL Certified CAT IV 600V & CAT III 1000V, Measures 0-200 Amps AC/DC & 0-1000 Volts AC/DC, Measures AC/DC Current, AC/DC Voltage, Continuity, Resistance, Capacitance, Diodes, & Senses AC Voltage, Built-In Flashlight & Dual Backlit Displays, Includes: Soft Case, Test Leads, & Batteries

Category: Multimeters

T5-rls, Replacement Test Leads For Fluke T5-1000 Or T5-600 Voltage, Continuity And Current Testers

Category: Voltage & Continuity Testers

Replacement Test Lead Set For Meters, Right Angle Inputs

Category: Test Lead Sets

2000 Amp AC/DC, 1000 Volt AC/DC, Digital Clamp Meter, 6000 Count LCD Display, Includes Carrying Case, Straight Input Test Leads, Instruction Manual, and AAA Batteries

Category: AC / DC Clamp Meters

Multimeter, Compact, Features: True RMS, AC/DC Voltage, AC/DC Amperage, Diodes, Frequency, Continuity, Capacitance

Category: Multimeters

Voltage Detector, VoltAlert, Low Voltage, Non-Contact, Maximum Rating: 90V AC, Features: Control Circuit Mode & Flat Tip

Category: Voltage Detectors

Non-Contact Voltage True-RMS AC/DC Clamp Meter with iFlex, 600-1000 Volt Range, Includes Unique Power Quality Indicator Pinpoints Whether A Problem Is In The Equipment Or Powerline (Relating To Current, Voltage, Power Factor Or Any Combination Of The Three), Includes: TL224 Test Leads, TP175 Test Probes, AC285 Black Grounding Clip, i2500-18iFlex Current Probe, TPAK Meter Hanger & Carrying Case

Category: Clamp Multimeters

Non-Contact Voltage Tester, UL Certified CAT IV 600V AC, 50 to 600 V AC, Auto Power Off - After 10 Minutes Of Inactivity (No Button Pressed And No Signals Detected), The Tester Will Emit One Long Beep (~0.5s) And Then Shut Off, Note: If The Flashlight Is On, It Will Be Also Shut Off, Low Battery Indication - If Battery Voltage Is Less Than Around 2.4V, The Green LED In The Tip Will Flash 3 Times And The Buzzer Will Send Out One Long Beep, Then Turn Off The Device

Category: Voltage & Continuity Testers

Single Range 24-600V AC NCVT w/Flashlight, UL Certified CAT IV 600V AC, 24 to 600 V AC, LED Flashlight In The Tip Operates Independently Of The Tester Functions And Can Be Used To Illuminate The Work Area, Audible Notification Disable, Auto Power Off - After 10 Minutes Of Inactivity (No Button Pressed And No Signals Detected), Low Battery Indication

Category: Voltage & Continuity Testers

Non-Contact Voltage Tester With Laser Pointer, Dual-Range 70 – 1000V AC / 12 – 1000V AC, Overall Length: 6"

Category: Voltage & Continuity Testers

Voltage Continuity Tester, UL Certified CAT IV 600V, 0-600V AC/DC, Measures AC/DC Voltage, Low Impedance AC Voltage (Lo Z) (For Ghost Voltage Dissipation), Automatically Identifies AC Or DC Voltage And Determines DC Polarity And Tests For Continuity And GFCI Operation, Backlit Display And Flashlight

Category: Voltage & Continuity Testers

3-Phase/Motor Rotation Tester, Voltage Rating: 100 - 600 VAC (10 - 400 HZ) Nominal For Phase Presence Indication, Amperage Rating: 18 MILAMP Maximum Consumption, 3 Ph Phase, Temperature Rating: 5 - 131 DEG F Operating, -4 To 158 DEG F Storage, Display: Neon Lamps And LEDs, Dimensions: 6 IN Height X 2.8 IN Width X 1.4 IN Depth, Phase Rotary Field Direction: 1 - 600 VAC (2 - 400 HZ), Determination Of Motor Rotation: 1 - 600 VAC (2 - 400 HZ) Requires Greater Than 1/2 Turn, Over Load Protection: 550 V (Between All Terminals), Fuses: 5 X 20 MM, 200 MILAMP/250 V Fuse, Battery: (1) 9 V (IEC 6LR61), Weight: 6.4 OZ (Including Battery), Includes: Carrying Case, Alligator Clip Leads, (1) 9 V Battery, Operating Instructions, Meets IEC-1010 (EN61010) Safety Requirements, CE N12966, CAT III 600V

Category: Phase Sequence Indicators

Electrical Troubleshooting Kit, Includes Fluke 1587FC Insulation Multimeter, Fluke i400 Current Clamp, and Fluke 62 MAX+ IR Thermometer

Category: Insulation Testers

Afci /Gfci Outlet Tester Rt310 Detects The Most Common Wiring Faults In Standard, Afci, And Gfci Electrical Outlets Test Afci Devices By Simulating Arc Fault Conditions Test Gfci Devices By Simulating Ground Fault Conditions Capable Of Detecting A Dual-Open Wiring Fault With Simultaneous Open Neutral And Open Ground Wires (Patent Pending Technology) Tester Delivers Clear Visual Indication Of The Wiring Condition At The Electrical Outlet Designed To Test North American-Style Grounded Electrical Outlets In 120V Ac Circuits (Incorporates A Three-Pin Plug) Electrical Plug Is On A 10-Inch (254 Mm) Flexible Electrical Cord To Access Electrical Outlets In Difficult To Reach Locations Low Battery Indicator And Easily Accessible Battery Compartment; Uses 3 X 1.5V Aaa Alkaline Batteries (Included) Powers Off Automatically After Approximately 2 Minutes Of Non-Use To Conserve Battery Life Built To Withstand A 6.6-Foot (2 M) Drop Catiii 135V Safety Rating Measurement Category Iii Is Applicable To Test And Measuring Circuits Connected To The Distribution Part Of The Building’S Low-Voltage Mains Installation The Rt310 Features A Patent Pending Afci Test Method That Is Unique To Klein Tools

Category: Receptacle Testers

Infrared Thermometer, Temperature Range: -30 °C to 650 °C (-22 °F to 1202 °F), Features: Dual Lasers, Min/Max/Avg/Dif

Category: Temperature Testers

400A AC/DC TightSight® Clamp Meter, UL Certified CAT III 600V, Measures 0-600 Amps AC/DC, Measures AC/DC Current, AC/DC Voltage, Frequency, Resistance, Continuity, Capacitance, Diodes, Temperature, Senses AC Voltage, Built-In Flashlight & Probe Tip Holder, Includes Soft Case, Test Leads, Batteries, And K-Type Thermocouple

Category: AC / DC Clamp Meters

Auto Ranging Digital Multimeter with Analog Bargraph on Display, UL Certified CAT IV 600V CAT III 1000V AC/DC 10A AC/DC TRMS, Measures AC/DC Current, AC/DC Voltage, Lo Z, Frequency, Resistance, Continuity, Capacitance, Diodes, Temperature & Senses AC Voltage, Backlit Display, Includes: Soft Case, Test Leads, Batteries, & K-Type Thermocouple

Category: Multimeters

DIGITAL MULTI-TESTER MULTIMETER

Category: Receptacle Testers

Ideal; Insulation Tester; Resistance: 0-200? Ohm; Model: 795; Voltage Rating: 0.1 - 600v Ac/dc; Insulation Resistance: 0-4000m? Ohm; Warranty: 2 Year

Category: Insulation Testers

Circuit Analyzer with Large Color LCD Displays Easy to Understand Results for Wiring Faults, AFCI, GFCI, Voltage Drops and Time to Trip Devices, Detect and Identify Common Wiring Faults in Standard, AFCI and GFCI Electrical Outlets, Detects Dual (Open Neutral/Open Ground) Wiring Faults, Inspect AFCI and GFCI Devices; Includes Trip Time and Trip Current, 12A, 15A, and 20A Load Testing to Measure Percentage Voltage Drops, Powers Off Automatically After 5 Minutes of Inactivity to Conserve Battery Life, Detachable Cord for Easy Storage, For Use With North American 120V AC 3-Wire Electrical Outlets, Safety Rating: CAT III 135V, Includes (3) x AAA Batteries, Instructions, and Pouch

Category: Receptacle Testers

Allows The Measuring Of Current Draw Up To 15 Amps Without Splitting The Load's Power Cord, ***For North American-Style Outlets Only***

Category: Electrical Tester Accessories

Clamp Meter, Clamp-Pro, Maximum Rating: 600A AC & 600V AC/DC, Features: Auto & Manual Ranging, Low Battery Indicator & Non-Contact Voltage Indicator

Category: AC / DC Clamp Meters

Dual Display Digital Clamp Meter Allows Users To See Readings In Tight Space Areas, Ac/Dc Clamp Meter With True Rms Provides Accurate And Reliable Measurements Across Various Applications, Measures Ac/Dc Current And Ncvt Via Clamp; Ac/Dc Voltage, Resistance, Continuity, Frequency/Duty Cycle, Dc Microamps, Diode Test And Capacitance Via Test Leads; Temperature Via Thermocouple, Backlit Reverse-Contrast Lcds For Clear Data And Best Viewability In All Environments, Withstands Drops From 6.6 Feet (2 M), And Includes Right-Angle Input Test Leads, Thermocouple, Storage Pouch, Instruction Manual, And 2 X Aa Batteries, Ergonomic Design Provides A Comfortable Grip, With Easy Dial Adjustment Using The Thumb, Non-Contact Voltage Detection Is Integrated Into The Clamp Jaw, With Audible And Visual Indicators That Intensify As The Clamp Moves Closer To The Voltage Source, Clamp Body Includes A Side-Mounted Test Lead Holder And A Back Mount That Accommodates An Optional Magnetic Hanger (Cat. Nos. 69445 Or 69417) For Hands-Free Operation

Category: AC / DC Clamp Meters