Search results

120V AC GFCI Receptacle Tester, Detects Common Wiring Problems in Receptacles, Confirms Operation of GFCI Protective Devices

Category: Receptacle Testers

120V AC Circuit Breaker Finder w/Flashlight, NCVT & GFCI CAT II 150V, Quickly and Easily Identifies Circuit Breakers/Fuses Without Disrupting Power On Energized 120V AC Circuits, Clear Visual and Audible Indicators (Audible Can Be Muted), NCVT in Receiver Tip Indicates Presence of AC Voltage Between 80-300V AC, Flashlight in Receiver Operates Independently of the Tester Functions and Can Be Used to Illuminate Work Area, Transmitter Tests Outlet Wiring Configurations (Indicated Via Green/Red LEDs) and Tests GFCIs

Category: Circuit Breaker Finders

True RMS Clamp Meter, Tightsight Series, 400 Amp, 600 Volt AC Provides True RMS AC Voltage, Measures AC Current, AC/DC Voltage, Frequency, Resistance, Continuity, Capacitance, Diodes, Temperature And Senses AC Voltage, Built-In Probe Tip Holder, Backlit Display, Includes: Soft Case, Test Leads, Batteries And K-Type Thermocouple

Category: AC Clamp Meters

Dual Range 12-1000V AC NCVT w/Flashlight, UL Certified CAT IV 1000V AC, 12-1000 V AC Low Range, 50 To 1000 V AC High Range, LED Flashlight In The Tip, Audible Notification Disable, Auto Power Off, Low Battery Indication

Category: Voltage & Continuity Testers

Single Range 24-600V AC NCVT w/Flashlight, UL Certified CAT IV 600V AC, 24 to 600 V AC, LED Flashlight In The Tip Operates Independently Of The Tester Functions And Can Be Used To Illuminate The Work Area, Audible Notification Disable, Auto Power Off - After 10 Minutes Of Inactivity (No Button Pressed And No Signals Detected), Low Battery Indication

Category: Voltage & Continuity Testers

IDEAL, Clamp Meter, TightSight, 760 Series With TRMS, Capacitance, Frequency, Resistance: 0 To 999.9 OHM , 1000 To 9999 OHM At 1.5PCT + 5 Accuracy, Capacitance: 0 To 999.9 MFD At 5 PCT Plus 15 Accuracy, Display: 4 Digit LCD With 9999 Counts For Both Displays With 41 Segment Analog Bar Graph On Front Display

Category: AC / DC Clamp Meters

True RMS Clamp Meter With Flashlight, Tightsight Series, 600 Amp, 1000 Volt AC/DC, Measures AC/DC Current, AC/DC Voltage, Frequency, Resistance, Continuity, Capacitance, Diodes, Temperature, Low Impedance AC Voltage , Senses AC Voltage,, Probe-Tip Holder, Includes: Soft Case, Test Leads, Batteries, And K-Type Thermocouple

Category: AC / DC Clamp Meters

Alligator Plug/Lighting Adaptor, Allows SureTest® Circuit Analyzer To Analyze Non-Outlet Based Circuit For Branch Circuit Safety And Performance

Category: Electrical Tester Clips

Universal Test Leads & Alligator Clips

Category: Electrical Tester Clips

Voltage Tester With LED Flashlight, Non-Contact, Range 50-1000 Volt AC, Dust Tight And Water Proof, Audible Notification Disable, Auto Power Off, Low Battery Indication, UL Listed

Category: Voltage & Continuity Testers

Split Jaw Digital Fork Meter, UL Certified CAT IV 600V & CAT III 1000V, Measures 0-200 Amps AC/DC & 0-1000 Volts AC/DC, Measures AC/DC Current, AC/DC Voltage, Continuity, Resistance, Capacitance, Diodes, & Senses AC Voltage, Built-In Flashlight & Dual Backlit Displays, Includes: Soft Case, Test Leads, & Batteries

Category: Multimeters

3-Phase/Motor Rotation Tester, Voltage Rating: 100 - 600 VAC (10 - 400 HZ) Nominal For Phase Presence Indication, Amperage Rating: 18 MILAMP Maximum Consumption, 3 Ph Phase, Temperature Rating: 5 - 131 DEG F Operating, -4 To 158 DEG F Storage, Display: Neon Lamps And LEDs, Dimensions: 6 IN Height X 2.8 IN Width X 1.4 IN Depth, Phase Rotary Field Direction: 1 - 600 VAC (2 - 400 HZ), Determination Of Motor Rotation: 1 - 600 VAC (2 - 400 HZ) Requires Greater Than 1/2 Turn, Over Load Protection: 550 V (Between All Terminals), Fuses: 5 X 20 MM, 200 MILAMP/250 V Fuse, Battery: (1) 9 V (IEC 6LR61), Weight: 6.4 OZ (Including Battery), Includes: Carrying Case, Alligator Clip Leads, (1) 9 V Battery, Operating Instructions, Meets IEC-1010 (EN61010) Safety Requirements, CE N12966, CAT III 600V

Category: Phase Sequence Indicators

Non-Contact Voltage Tester, UL Certified CAT IV 600V AC, 50 to 600 V AC, Auto Power Off - After 10 Minutes Of Inactivity (No Button Pressed And No Signals Detected), The Tester Will Emit One Long Beep (~0.5s) And Then Shut Off, Note: If The Flashlight Is On, It Will Be Also Shut Off, Low Battery Indication - If Battery Voltage Is Less Than Around 2.4V, The Green LED In The Tip Will Flash 3 Times And The Buzzer Will Send Out One Long Beep, Then Turn Off The Device

Category: Voltage & Continuity Testers

E-Z Check® Plus Circuit Tester, Compatible Circuits: 125V AC, Features: Tests GFCIs for Proper Operation & Verifies Wiring Configuration, Includes: Impact-Resistant Case

Category: Receptacle Testers

Nylon Strap With Magnetic Hook And Tester Clip, For Use With IDEAL® 61-327, 61-337, 61-347, 61-357, 61-405, 61-415, 61-547, 61-557, 61-737, 61-747, 61-757 Testers

Category: Electrical Tester Accessories

GFCI Receptacle/Voltage Tester, 120 Volt, LCD Display, Includes Polarity Indication, GFI Trip, and Is UL Listed

Category: Receptacle Testers

Voltage Tester, Vol-Con, Maximum Rating: 600V AC/DC, Features: Identifies Voltages (5-600V AC/DC), Tests Continuity, Visual/Vibration Indication & LED/Neon Lamps, Includes Test Leads

Category: Voltage & Continuity Testers

Clamp Meter, Clamp-Pro, Maximum Rating: 600A AC & 600V AC/DC, Features: Auto & Manual Ranging, Low Battery Indicator & Non-Contact Voltage Indicator

Category: AC / DC Clamp Meters

Voltage Continuity Tester, UL Certified CAT IV 600V, 0-600V AC/DC, Measures AC/DC Voltage, Low Impedance AC Voltage (Lo Z) (For Ghost Voltage Dissipation), Automatically Identifies AC Or DC Voltage And Determines DC Polarity And Tests For Continuity And GFCI Operation, Backlit Display And Flashlight

Category: Voltage & Continuity Testers

400A AC/DC TightSight® Clamp Meter, UL Certified CAT III 600V, Measures 0-600 Amps AC/DC, Measures AC/DC Current, AC/DC Voltage, Frequency, Resistance, Continuity, Capacitance, Diodes, Temperature, Senses AC Voltage, Built-In Flashlight & Probe Tip Holder, Includes Soft Case, Test Leads, Batteries, And K-Type Thermocouple

Category: AC / DC Clamp Meters

Auto Range Multimeter, UL Certified CAT III 600V AC/DC 10A AC/DC TRMS Auto Ranging, Measures AC/DC Current, AC/DC Voltage, Frequency, Resistance, Continuity, Capacitance, Diodes, Temperature & Senses AC Voltage, LEAD Position Warning & Open FUSE Indication, Backlit Display, Includes: Soft Case, Test Leads, Batteries, & K-Type Thermocouple

Category: Multimeters

Ideal; Insulation Tester; Resistance: 0-200? Ohm; Model: 795; Voltage Rating: 0.1 - 600v Ac/dc; Insulation Resistance: 0-4000m? Ohm; Warranty: 2 Year

Category: Insulation Testers

Carrying Case, Padded, Nylon, For All Vol-con and Vol-test Voltage Testers

Category: Electrical Test Kit Carrying Cases

Auto Range Multimeter, UL Certified CAT IV 600V CAT III 1000V AC/DC 10A AC/DC TRMS, Measures AC/DC Current, AC/DC Voltage, Frequency, Resistance, Continuity, Capacitance, Diodes, Temperature & Senses AC Voltage, Backlit Display, Includes: Soft Case, Test Leads, Batteries, & K-Type Thermocouple

Category: Multimeters