Splice Kits - Low Voltage

Easy-Splice Wrap-Around UF Splice Kit for 14/2 - 8/3 with Ground Easy-Splice Wrap-Around UF Splice Kit provides a quick and convenient method of splicing underground feeder (UF) cable. Convenient wrap-around design and fast installation. No heating or waiting for compounds to cure. The unique sealing gel entirely encapsulates the splice, completely sealing out moisture and other contaminants. Kit includes connector and closure. Rated for 600V applications.

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Direct Burial Roll-On Splice Sleeve for 250 - 600 MCM

Category: Low Voltage Direct Burial Splice Kits

Splice Kit, Direct Bury, 600V, Wire Range: 18 AWG to 10 AWG. Includes: (1) Splice Tube, (1) O and (1) B Connector. Color: Orange / Blue.

Category: Low Voltage Direct Burial Splice Kits

Easy-Splice Wrap Around Gel Splice Kit - 500 MCM to 6 AWG - 10 Inch Easy-Splice wrap-around gel splice closure sleeves quickly insulate and seal buried electrical connections rated up to 1,000 volts. Engineered to handle direct burial and manhole applications, these splice enclosure sleeves are equally well suited for insulation and jacket repair. Simply wrap and snap the sleeve on any cable in the use range. The sealant gel in the sleeve seals on contact. The splice closure sleeve can be applied on all common compression connectors and low voltage cables, as well as in-line mechanical connectors. Qualified to ANSI C119.1-1986 for underground splicing. A minimum seal length is required on each side of the connector opening or jacket damage. Use this guideline for minimum seal distance: WAGS-4/0 Series: 1.50" each side WAGS-500 Series: 2.20" each side WAGS-750 Series: 3.00" each side

Category: Low Voltage Heat Shrink Splice Kits

URD Street lighting Tap Kit (Heat Shrink), #6 Str - #12 Sol Al/Cu

Category: Low Voltage Direct Burial Splice Kits

Buchanan, Y-Splice Kit, Y-Splice Kits, Voltage Rating: 600 V, Amperage Rating: 70 AMP, Line Side Cable Size: 10, 8, 6, 4, 2 AWG, Line Side Crimp Type: Copper or Aluminum, Line Side Insulation Diameter: .155 - .430 IN, Load Side Cable Size: 10 - 2 AWG, Load Side Crimp Type: Copper or Aluminum, Load Side Insulation Diameter: .120 - .430 IN

Category: Low Voltage Direct Burial Splice Kits

Splice Kit, Gel-Filled, Wrap-Around, 1000V, Conductor Range: 14 AWG - 4/0 AWG, Sleeve Length: 6.0". For use as Insulation and Jacket Repair in Direct Burial and Manhole Applications.

Category: Low Voltage Gel Filled Splice Kits

Easy-Splice Push On Gel Stub Splice Kit 250 - 500 MCM Quickly and conveniently insulate, seal and protect sub splice connections up to 1,000 Volts. The robust yet compact design is engineered to handle the harsh environment of motor and many other connection applications (including street lights). Specially formulated material provides excellent abrasion resistance, insulation value, and UV resistance. Each cap size is designed to fit a wide range of cable sizes. The expandable design keeps the cap as small as possible allowing it to expand only as much as needed to fit. Rated 105¦C. cULus listed. The kit includes one gel filled cap, one cap clamp, and one phase separator. The kits include three of each one per phase. INSTALLATION: GSS connector kits provide the fastest installation. Simply slide the cover down over the connection and snap the clamp closed. Sealant gel is already in the cap.

Category: Low Voltage Gel Filled Splice Kits

THB M2DBOOT-3 INSUL BOOT FOR

Category: Low Voltage Motor Lead Splice Kits

Splice Kit, Heat Shrink, 600V, Conductor Range: 14 AWG - 8 AWG, Provides Abrasion Resistance and Moisture Ingress For 14/3 Without Ground Thru 8/3 With Ground In Direct Burial Applications

Category: Low Voltage Heat Shrink Splice Kits

easy-splice Wrap-around 250 - 750 Mcm Conductor Size 14"

Category: Low Voltage Heat Shrink Splice Kits

easy-splice Wrap-around 500 Mcm - 6 Awg Conductor Size 8"

Category: Low Voltage Heat Shrink Splice Kits

EASY-SPLICE WRAP-AROUND 4/0 4IN

Category: Low Voltage Gel Filled Splice Kits

3m(tm) 3/c Low Voltage Splice Kit 5734, 250-500 Kcmil

Category: Low Voltage Direct Burial Splice Kits

KUBE Sealant for use with T&B Motor Disconnect Boots, Width 1 Inch, Length 10 Feet, Thickness 1/8 Inch, Polybutene Compound

Category: Low Voltage Motor Lead Splice Kits

BUR YS27UCG1 URD SECONDARY SPLICE KIT,OD:0.91 IN

Category: Low Voltage Heat Shrink Splice Kits

THB M2DBOOT-1 INSUL BOOT

Category: Low Voltage Motor Lead Splice Kits

COLD SHRINK - 0.37

Category: Low Voltage Cold Seal Splice Kits

3M 5735 3-CORE LOW VOLTAGE SPLICE

Category: Low Voltage Direct Burial Splice Kits

THB 5KVBOOT-2L MTR PIGTAIL CO

Category: Low Voltage Motor Lead Splice Kits

Easy-Splice Direct Burial Splice Kit with Rubber Cover 14 - 2/0 AWG Direct Burial Splice Kits are dual-rated for use with copper and aluminum cable. These kits consist of an in-line mechanical set screw connector pre-filled with oxide inhibitor and an EPDM rubber insulating cover to ensure a watertight seal. Rated 600 Volts APPLICATIONS: Street lights, motor connection, irrigation systems, HVAC, outdoor lighting, and over wire connectors for a secure seal.

Category: Low Voltage Direct Burial Splice Kits

GelWrap Splice, 8 Inch Long, 14 - 4/0 AWG With Ground, Submersible

Category: Low Voltage Gel Filled Splice Kits

Raychem TFT Power Cable Termination, Cold Applied / Cold Shrink, Power Cable Termination Voltage Class = 15kV, Tape, 1 Core

Category: Low Voltage Motor Lead Splice Kits

Quick Disconnect Terminal, Crimp Style, 400 MCM, 0.906 Inch Maximum Diameter, Brass/Silver Plated, For Use With Traction M

Category: Low Voltage Motor Lead Splice Kits