LED - Drivers

High Efficiency Normal Power LED System, 120-277 Volt, Ballast Dedicated To Operate Osram 1X LED T8 SubstiTUBE Instant Start Lamp, Standard Case Qty: 10 *Sylvania Part # 75311*

Category: LED Driver Power Supplies

12W 120-500MA OUTPUT 120-277V 0-10V DIMMING

Category: LED Driver Power Supplies

LED Emergency Driver, Constant Power, 120 –277 Volt Input, 12 Watt Output

Category: LED Driver Emergency Power Supplies

Programmable LED Driver, 30 Watt, 120·277 Volt Input, 10-56 Volt Output, 0-10V Dimming

Category: LED Driver Power Supplies

Remote Field installable 10W Emergency driver kit: Use for FluxPanel SBP: Selectable LED flat panel / FluxPanel FPZ: FluxPanel Gen2 LED flat panel / NWL Wraparound LED / SDS LED Selectable Strip. Construction/Finish: Bodine BSL310C2WM; Die formed .0625” galvanized steel J box and J box cover, which includes both ¾” and ½” knockouts; ½" Chase nipple and nut; Die formed .0625” galvanized steel J box mounting bracket; Two-wire illuminated test switch (2W-ITS) and wall plate.

Category: LED Driver Emergency Power Supplies

LED Electronic Driver, 60 Watt, 120 Volt

Category: LED Driver Power Supplies

Plug in Driver, 8W-40W, Non-Dimming

Category: LED Driver Power Supplies

KTLD-40-UV-SC1400-56-VDIM-W1/USB PIR SENSOR FOR KT-RHLED /G2 FIXTURES 12V INPUT IP65 BI-LEVEL CONTROL WITH ADJUSTABLE HOLD TIME DIM LEVEL AND STANDBY TIME. PRESET FOR 5 MIN HOLD TIME 10 MIN STANDBY TIME AT 10% DIM DAYLIGHT DISABLED

Category: LED Driver Power Supplies

LED EMERGENCY BACK-UP ONE PIECE SLIM 5W CONSTANT WATTAGE DESIGN APPROX 500 LUMENS. 90 MIN OPERATION 120-277V INPUT CEC T20 COMPLIANT. INCLUDES INSTRUCTION SHEETS TEST SWITCH AND WIRING ACCESSORIES

Category: LED Driver Emergency Power Supplies

51633 60W 12V DIMMABLE CONSTANT VOLTAGE LED POWER SUPPLY. DIMMABLE WITH 0 10V TYPE DIMMERS *Sylvania Part # 51633*

Category: LED Driver Power Supplies

Constant Power Emergency LED Driver: 120-277VAC Input Voltage, 15-55VDC Output Voltage (Class 2 Compliant). .67A(@15VDC) - .18A(@55VDC), 10 Watts (Constant). UL Listed for factory and field installation. Acuity/Iota ILBLP CP10 HE SD A M9, CI Code: *265S9Y.

Category: LED Driver Emergency Power Supplies

60W MAX 12V OUTPUT NORMAL POWER FACTOR

Category: LED Driver Power Supplies

KTLD-25-UV-SC1250-56-VDIM-W1/USB 9.5W 1740 LUMEN 4FT BALLAST COMPATIBLE 5000K SMARTDRIVE

Category: LED Driver Power Supplies

5W 500 LUMEN REMOTE COMPACT BATTERY PACK. CEC T20 COMPLIANT.

Category: LED Driver Emergency Power Supplies

LED Emergency Driver - Input Voltage: 120-277V AC. Operates an LED Load of up to 10W at nominal battery voltage for a minimum of 90 minutes. UL RECOGNIZED Factory Installation * (Indoor and Damp) Output Class 2 Compliant **BSL310 is field installable when used with the Philips EvoKit LED Retrofit Luminaire and installed by Licensed Electrician** See pg. 6 of Wiring Diagram .pdf **

Category: LED Driver Emergency Power Supplies

Programmable LED Driver: WORKHORSE; Output Wattage: 96, Universal Voltage: 120-277V, 50/60Hz., Output Voltage: 30-56VDC: Constant Current; 700-2400 Programmable (To Program, use 0-10V or TPSB100 Programmer), Single Channel, Class 2

Category: LED Driver Power Supplies

10 Watt Emergency LED Driver, Class 2 Output, Very Compact Low Profile Case, ABConnect and STSelect Equipped, Metal IP65 Bi-Color LED and Test Switch, 14.1” x 1.18” x 1"

Category: LED Driver Emergency Power Supplies

LED-DR8-24 CV 24VDC DRIVER 8W

Category: LED Driver Power Supplies

ALG ADPTPRO-DRJ-192-24

Category: LED Driver Power Supplies

CRI-SCSS-36-EPDM-RFD309724 SPECIAL DRIVER FOR VANTAGE FIXTURE

Category: LED Driver Power Supplies

LED Emergency Driver - Input Voltage: 120-277V AC. Matal Case with Conduit. Operates an LED Load of up to 10W at nominal battery voltage for a minimum of 90 minutes. Listed to UL924 and tested to CSA 22.2, No. 141 For Field or Factory Installation (Indoor and Damp) Output Class 2 Compliant **BSL310 is field installable when used with the Philips EvoKit LED Retrofit Luminaire and installed by Licensed Electrician** See pg. 6 of Wiring Diagram .pdf **

Category: LED Driver Emergency Power Supplies

10 Watt Emergency Driver for Linear LED Strips, 120-277 Volt, 90 Minute Illumination Time

Category: LED Driver Emergency Power Supplies

12V DC 27-45W DIM. DRIVER 100-130V AC INPUT CETLUS

Category: LED Driver Power Supplies

LED Constant Voltage Driver: Input Voltage: 100-277V AC; Current: 1.3A, Output Voltage: 24V DC, Rated Current: 4A@24VDC, Max. Load: 96W, Min. Load: 9.6W.

Category: LED Driver Power Supplies