Search results

One-time installation of low profile base. Personnel can apply their portable safety cover to any installed base. Fast and convenient lockut at the point of need. Each base supplied with one yellow and one red label.

Category: Pilot Device Guards & Shrouds

30.5 mm, Heavy-Duty Accessory - Emergency Stop Safety Cover, Used With Emergency Stop Pushbutton Operator. Permits locking in depressed (Off) position.

Category: Pilot Device Guards & Shrouds

Pushbutton enclosures PB, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and cover: Dipcoat primed, powder-coated on the outside, textured paint, color: RAL 7035, supply includes: Enclosure with screw-cover with 30.5mm pushbutton hole (s), Rear wall mounting holes, description: These PB enclosures can be used for virtually any application that requires mounting of pushbuttons, pilot lights, selector switches,etc. The PB series ensures NEMA protection through a foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and cover.

Category: Steel Pilot Device Enclosures

BRA 130821 30 MM PUSH BUTTON LOCKOUT W/TAGS

Category: Pilot Device Guards & Shrouds

BRA130823 22MM PUSH BUTTON 22MM PUSH BUTTON/E STOP LO BASES 5PACK

Category: Pilot Device Guards & Shrouds

30.5 mm, Non-metallic Heavy-Duty Accessory, Pushbutton Operator and Knob Type Selector Switch Sealing Shroud.

Category: Pilot Device Guards & Shrouds

Universal fit for IEC and NEMA buttons. Devices are removable and transparent red cover allows view of button position. The hinged eyelet accepts safety locks. Each base supplied with one yellow and one red label.

Category: Pilot Device Guards & Shrouds

22.5 mm, Heavy-Duty Accessory - Emergency Stop Safety Cover, Used With Emergency Stop Pushbutton Operator. Permits locking in depressed (Off) position.

Category: Pilot Device Guards & Shrouds

22.5 mm, Non-metallic Heavy-Duty Accessory, Pushbutton Operator and Knob Type Selector Switch Sealing Shroud.

Category: Pilot Device Guards & Shrouds

L handles, material: Stainless steel 1.4404 (AISI 316L), surface: Brushed, supply includes: Oil resistant gasket

Category: Stainless Steel Pilot Device Enclosures

Pushbutton housing PB, mini, material: Sheet steel, surface: Polyester powder coating on a phosphated surface finish, color: RAL 7035, supply includes: Cover screws, captive, Wall mounting brackets, description: The NEMA rated PB series pushbutton box enclosure is designed for indoor use to house pushbuttons, selector switches, and pilot lights. This enclosure protects equipment from dirt, dust, sprayed water, oil, and coolants.

Category: Polyester Pilot Device Enclosures

Pushbutton housing PB, extra large, material: Sheet steel, surface: Polyester powder coating on a phosphated surface finish, color: RAL 7035, supply includes: Wall mounting bracket, Mounting plate: Zinc-plated, Cover screws, captive, description: The NEMA rated PB series pushbutton box enclosure is designed for indoor use to house pushbuttons, selector switches, and pilot lights. This enclosure protects equipment from dirt, dust, sprayed water, oil, and coolants.

Category: Polyester Pilot Device Enclosures

Pushbutton housing PB, Stainless steel, material: Stainless steel 1.4301 (AISI 304), surface: Enclosure and cover: Brushed, grain 240, supply includes: Wall mounting bracket, Cover screws, captive, description: The NEMA rated PB series pushbutton box enclosure is designed for indoor use to house pushbuttons, selector switches, and pilot lights. This enclosure protects equipment from dirt, dust, sprayed water, oil, and coolants.

Category: Stainless Steel Pilot Device Enclosures

Mini Pushbutton Box, NEMA 4, NEMA 12, NEMA 13, Number of Holes: 2, Hole Diameter: 0.8858268", Dimensions: H: 5.1", W: 2.7", D: 3.5"

Category: Polyester Pilot Device Enclosures

Pushbutton enclosures PB, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and cover: Dipcoat primed, powder-coated on the outside, textured paint, color: RAL 7035, supply includes: Enclosure with screw-cover with 30.5mm pushbutton hole (s), Rear wall mounting holes, description: These PB enclosures can be used for virtually any application that requires mounting of pushbuttons, pilot lights, selector switches,etc. The PB series ensures NEMA protection through a foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and cover.

Category: Polyester Pilot Device Enclosures