Search results

ABB 1SVR405611R7000

Category: Power Interface Relays

General Purpose Relay, 120V AC Coil, DPDT, 250V Rated, Contact Rating: 12 Amp. Terminal Style: 8 Blade. CR-M Series. Socket Mountable Interface Relay with LED. Uses 14 Blade Mounting Socket

Category: 8-Blade Ice Cube Relays

11 Blade Socket. 10 Amp @ 300V, 20 Amp Maximum Load. For use with CR-M Series Relays.

Category: 11-Blade Mounting Sockets

Abb; Electronic Time Relay; Ct-ahd 22, Off-delay; Timing Range: 05 S - 100 Hr; Coil: 24 - 240 Vac, 24 - 48 Vdc; Contact Configuration: 2 C/o; Contact Rating: 250 V, 5 Amp; Mounting: Din Rail (en 60715), Snap-on; Connection: Fine Strand Withwire End Ferrule: (2) 20 - 16 Awg/(1) 20- 14 Awg, Fine Strand Without Wire End Ferrule: (2) 20 - 16 Awg/(1) 20- 14 Awg, Rigid: (2) 20 - 16 Awg/(1) 20- 12 Awg; Enclosure: Ip50 (enclosure), Ip20 (terminal); Size: 0.69 In Width X 2.76 In Height X 2.28 In Depth; Operating Cycles: Mechanical Switching: 30000000 Cycles, Electrical Switching: 100000 Cycles; Operating Temperature: -20 To +60 Deg C; Environmental Conditions: Storage Temperature: -40 To 85 Deg C, Damp Heat: 95 Pct Rh;amperage Rating: 19.89 Milamp At 115 Vac, 31.3 Milamp At 230 Vac, 24.12 Milamp At 24 Vdc; Accuracy: Less Than 005 Pct Within The Rated Control Supply Voltage, Less Than 06 Pct Within The Temperature Range; Recovery Time: Less Than 50 Ms; Contact Material: Cd-free; Switching Current: 100 Milamp Minimum; Indicator: Greenled For Supply Voltage, Yellow LED For Relay Status; Switching Voltage: 12 V Minimum; Switching Current: 5 Amp At 230 Vac (resistive), 3 Amp At 230 Vac (inductive), 5 Amp At 24 Vdc (resistive), 2 Amp At 24 Vdc (inductive); Output Circuit: 25-26/28

Category: DIN Rail Mount Timing Relays

Abb 1svr550100r4100 On Del Tm

Category: DIN Rail Mount Timing Relays

ABB Ra5-1 Interface Relay

Category: Power Interface Relays

Over and undervoltage monitor for 3 phase mains from 160 to 300 VAC, with DPDT relay output and 0.1 to 30 sec. time delay

Category: DIN Rail Mount Timing Relays

Relay, Hold Down Clips, 2 per Packet, Based on Socket Not on Relay

Category: Mounting Socket Hold Down Clips

Relay, Ice Cube, 11 Blade, 3-Pole Double Throw, 120 Volt AC Coil, 13 Amp, 220/240/277 Volt AC

Category: 11-Blade Ice Cube Relays

Abb; Relay; Rb 121a; Power Supply: 0.46 Wtt At 115 Vac/vdc; Connection: Screw Clamp; Voltage Rating: Input: 115 Vac/vdc, Output: 250 Vac; Amperage Rating: 6 Amp; Enclosure: NEMA 1, Ip20; Operating Temperature: -20 To +70 Deg C; Spacing: 6 Mm; Color: Gray; Tightening Torque: 0.4 - 0.6 N-m; Wire Strip Length: 9 Mm; Contact Configuration: 1 Spdt; Wire Size: Solid And Stranded: 24 - 12 Awg (ul94 V0);size: 67.5 Mm Length X 6 Mm Width X 70 Mm Height; Frequency Rating: 50/60 Hz; Number Of Poles: 1; Recommended Screw Driver: 3.5 Mm; Operating Cycles: On-load (ac-15): 100000 Operations, Off-load: 10000000 Operations; Minimum Switching Capacity ¢v/ma!: 5 V/milamp; Switching: 12 V/250 Vac; Bounce Time: 1.2 Ms

Category: Signal Converter Interface Relays

ABB AFRA4 INTERFACE RELAY RA4

Category: Power Interface Relays

ABB 2TLA020071R8200

Category: Intelligent Safety Relays

Timing Relay, Electronic, On-Delay, 0.6 - 6 Second, Range, 1-Pole, Normally Open, Normally Closed Contact, 24 - 240 Volt AC/DC

Category: DIN Rail Mount Timing Relays

Abb 1sna645005r0700 Relay 24vac/dc Rb121a Module 1spdt Low Level 6mm 1ma Up To 6a

Category: Signal Converter Interface Relays

ABB Timer With 24-240 Vac 24-48 Vdc Rated Control Supply Voltage, Timing Range Of 7(0.05 S - 100 H), A Control Input, And 1 Spdt (c/o) Output Contact In Width X 2.76in Height X 2.28 In Depth

Category: DIN Rail Mount Timing Relays

Timer with 12-240 Vac/dc Rated Control Supply Voltage, Timing Range Of 7 (0.05 S- 100 H), A Control Input, and 2 SPDT (c/o) Output Contacts on Cycles, Electrical: 100000 Cycles; Size: 0.69 Inch Width X 3.15 Inch Height X 2.28 Inch Depth, Supply Voltage: 12 - 240 Vac/Vdc, Switching Voltage: 12 V Minimum; Switching Current: 100 Milamp Minimum, Rated Switching Current: 5 Amp at 230 Vac (Resistive), 0.75 Amp at 230 Vac (Inductive), 5 Amp at 24 Vdc (Resistive), 1 Amp at 24 Vdc (Inductive)

Category: DIN Rail Mount Timing Relays

Safety/Expansion Relay, Sentry BSR23, 24 Volt DC, 4 Normally Open, 1 Normally Closed, No Time Delay

Category: Intelligent Safety Relays

ABB 293B254A18 48V DC AUX RLY

Category: Open Power Relays

ABB R600, 6 Mm Wide, 24v Ac/dc Interface Relay Module With Screw Clamp Connections And A 0.01-6 Amp Rated Spdt Relay Output With Led Indicator 50/60 Hz; Number Of Poles: 1

Category: Signal Converter Interface Relays

ABB 2TLA010029R0000 Rt9 Series Safety Relay With 24v Dc Supply, 22.5mm Wide

Category: Intelligent Safety Relays

Abb 1svr500160r0000 Pulse Gen

Category: DIN Rail Mount Timing Relays

ABB 2TLA020071R8100 JOKAB

Category: Intelligent Safety Relays

Abb; Electronic Time Relay; Ct-ere, On-delay; Timing Range: 3 - 300 S; Coil: 110- 130 Vac; Contact Configuration: 1 C/o; Contact Rating: 250 V, 4 Amp; Mounting:din Rail (en 50022); Connection: Fine Strand With Wire End Ferrule: (2) 1.5 Sq-mm; Enclosure: Ip50 (enclosure), Ip20 (terminal); Size: 78 Mm Length X 22.5 Mm Width X 78.5 Mm Depth; Operating Cycles: Mechanical Switching: 30000000 Cycles, Electrical Switching: 100000 Cycles; Operating Temperature: -20 To +60 Deg C; Environmental Conditions: Storage Temperature: -40 To 85 Deg C; Accuracy: Less Than0.5 Pct Within The Rated Control Supply Voltage, Less Than 0.1 Pct Within The Temperature Range; Recovery Time: Less Than 50 Ms; Indicator: Green LED For Supplyvoltage, Red LED For Relay Status; Switching Current: 4 Amp At 230 Vac (resistive), 3 Amp At 230 Vac (inductive); Output Circuit: 15-16/18; Power Consumption: 2va At 110 - 130 Vac And 220 - 240 Vac, 1 Va At 24 Vac/vdc; Contact Material: Agcdo; Switching Voltage: 250 Vac/vdc Maximum

Category: DIN Rail Mount Timing Relays

RT6 series safety relay with 24V DC supply, 45mm wide

Category: Intelligent Safety Relays