Search results

RITTAL 9341050

Category: Modular Motor Control Busbar Support

RIT 9341120 2 EA

Category: Manual Motor Protector Busbars

End covers, description: Side contact hazard protection of the busbar assembly. Packaging Unit: 2 pc(s).

Category: Modular Motor Control Busbar Covers

OZG 7ASDP 7A INERTIA SWITCH N

Category: Water Pump Pressure Limit Switches

RILINE TOP COVER - 700MM

Category: Modular Motor Control Busbar Covers

Pushbutton enclosures PB, material: Door: Sheet steel, all-round foamed-in PU seal, Enclosure: Sheet steel, surface: Enclosure and cover: Dipcoat primed, powder-coated on the outside, textured paint, color: RAL 7035, supply includes: Enclosure with screw-cover with 30.5mm pushbutton hole (s), Rear wall mounting holes, description: These PB enclosures can be used for virtually any application that requires mounting of pushbuttons, pilot lights, selector switches,etc. The PB series ensures NEMA protection through a foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and cover.

Category: Steel Pilot Device Enclosures

Switch, Inertia, 7A Series, 1 Normally Open, 1 Normally Closed Contact, NEMA 7/9, Snap Action

Category: Water Pump Pressure Limit Switches

OZG TBSM SWITCH VIBRATION NEM

Category: Assembled Miniature DIN Safety Interlock Limit Switches

Control Center Name Plate, Legend Stop, Used On NCSEW and Class 441 Control Operator

Category: 30mm Pushbutton Legend Plates

Explosion-Proof Non-Illuminated Pushbutton, Type Short Barrel, Operation Type Momentary, Contact Configuration 1NC, Contact Rating 600 VAC, Cap/Lens Color Red, Enclosure Material Copper-Free Aluminum, Enclosure Class I Div 1 and 2 Group B C D, Class I Zone 1 and 2 Group IIA IIB, Class II Div 1 and 2 Group E F G, Class III, NEMA 4/7BCD/9EFG, Approval UL 886, CSA C22.2, Connection Size 3/4 Inch NPSM, Constructional Feature Explosion-Proof, Application Hazardous Location

Category: 30mm Hazardous Location Pushbutton Operators

Explosion-Proof Non-Illuminated Pushbutton, Type Short Barrel, Operation Type Momentary, Contact Configuration 1NO-1NC, Contact Rating 600 VAC, Cap/Lens Color Black, Enclosure Material Copper-Free Aluminum, Enclosure Class I Div 1 and 2 Group B C D, Class I Zone 1 and 2 Group IIA IIB, Class II Div 1 and 2 Group E F G, Class III, NEMA 4/7BCD/9EFG, Approval UL 886, CSA C22.2, Connection Size 3/4 Inch NPSM, Constructional Feature Explosion-Proof, Application Hazardous Location

Category: 30mm Hazardous Location Pushbutton Operators

Motor Vibration Switch, Type Vibration Switch, Used On Motor/Generator/Engine/Pump/Fan, Approval UL, Material Cast Copper Free Aluminum Enclosure, Finish Gray Epoxy Powder Coated, Inclusion Manual Reset Button, Switch Current Rating 15 Ampere at 125/250/480 VAC, 1/2 Ampere at 125 VDC, 1/4 Ampere at 250 VDC, Switch Power Rating 1/8 HP at 125 VAC, 1/4 HP at 250 VAC, Enclosure Class I Div 1 2 Group B C D Zone 1 2 Group IIA IIB Hydrogen, Class II Div 1 2 Group E F G, Class III, NEMA 4/7B/7C/7D/9E/9F/9G

Category: Assembled Miniature DIN Safety Interlock Limit Switches

L handles, material: Stainless steel 1.4404 (AISI 316L), surface: Brushed, supply includes: Oil resistant gasket

Category: Stainless Steel Pilot Device Enclosures

Base trays, material: Thermally modified hard PVC., Fire protection corresponding to UL 94-V0, color: RAL 7035, description: Side contact hazard protection of the busbar assembly. Packaging Unit: 2 pc(s).

Category: Modular Motor Control Busbar Support

BUSBAR E-CU 30 X 10 X 2400MM

Category: Modular Motor Control Busbars

Busbar support, 1/2-pole, material: Polyamide (PA 6.6), Fire protection corresponding to UL 94-V0, color: RAL 7035 Packaging Unit: 4 pc(s).

Category: Modular Motor Control Busbar Support