Hole Saws / Cutters

GRE 825B-2-1/8 HOLESAW VARIAB

Category: Bi-Metal Hole Saws

1-1/4" Diamond Plus™ Hole Saw

Category: Diamond Grit Hole Saws

Milwaukee; Annular Cutter; Diameter: 7/8 In; Cutting Depth: 2 In; Shank Diameter: 3/4 In

Category: Annular Cutters

1-1/2" Diamond Plus™ Hole Saw

Category: Diamond Grit Hole Saws

GRE 38522B ARBOR-.312 HEX BUL

Category: Hole Saw Arbors

Utility Bit, Bi-Metal, Hex Shank Size: 1/4", Bit Size: 5/8", Length: 6", Cutting Edges: 3

Category: Bi-Metal Hole Saws

For materials up to 3/16ö, these carbide tipped sheet metal Hole Saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the carbide. Milwaukee recommends the use of Hawg Wash« cutting fluid for best results. Hawg Wash« fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2-1/4 inch diameter. Bullets: 7/8 in. bit diameter For use with quick change arbor 49-57-0035 3/16 in. cutting depth 05547

Category: Carbide Tipped Hole Saws

GRE 825B-2-3/8 HOLESAW VARIAB

Category: Bi-Metal Hole Saws

GRE 825B-2 HOLESAW VARIABLE P

Category: Bi-Metal Hole Saws

5/16IN DIAMOND ONE-PIECE HOLE SAW

Category: Diamond Grit Hole Saws

GRE 825B-2-1/2 HOLESAW VARIAB

Category: Bi-Metal Hole Saws

Electrician's/Plumber's Hole Saw Kit, 3/4" through 2-1/2" Conduit Sizes

Category: Hole Saw Kits

ARBOR

Category: Hole Saw Arbors

20percent Thinner Wall Construction Faster Cutting Due To Less Material Being Removed For The Same Size Hole, Duel Alternating Tooth Geometry, More Aggressive Cutting As Well As Increased Chip Ejection, Cuts Up To 15percent Faster, Proprietary Steel And 3

Category: Annular Cutters

TKO Carbide Tipped Hole Cutter, 1-7/16", Smooth Start

Category: Carbide Tipped Hole Saws

Threaded Steel Hawg Cutters, Diameter/Size: 1-1/16"

Category: Carbide Tipped Hole Saws

1/4" Diamond Plus™ Hole Saw

Category: Diamond Grit Hole Saws

Quick Change Steel Plate Carbide Hole Cutter Set, 5PC, Includes: (1) 11/16" Carbide Cutter, (1) 13/16" Carbide Cutter, (1) 15/16" Carbide Cutter, (1) Pilot Bit, (1) Quick Change Arbor with Pilot Bit

Category: Hole Saw Kits

Replacement Blades And Bit For The Adjustable Hole Saw With Auto-Set Arms (Cat. No. 53710), The Adjustable Hole Saw With Auto-Set Arms Provides Smooth Cuts From 2 To 7-Inches (5.1 To 17.8 Cm) In Drywall And Ceiling Tile, Features Integrated Gears For Easy Blade Adjustment And Centered Pilot Bit, Replacement Kit Comes With 2 Blades, 1 Pilot Bit, 2 Hex Keys, 4 Washers, 2 End Screws And 1 Set Screw, Using The Large Hex Key, Remove And Replace End Screw, Washers, And Blade, Using The Small Hex Key, Remove And Replace Pilot Bit Set Screw And Pilot Bit, After Replacing, Ensure All Screws Are Fully Seated And Snug-Tight Before Using The Adjustable Hole Saw With Auto-Set Arms To Cut Drywall Or Ceiling Tile

Category: Hole Saw Adapters

One-Piece Carbide Hole Cutters, 1-7/32 Inch Size, 1/4 Inch Diameter, 3/8 Inch Shank Size

Category: Carbide Tipped Hole Saws

1-1/2IN CARBIDE HOLE CUTTER

Category: Carbide Tipped Hole Saws

1/4 Inch Hole Dozer™ with Carbide Teeth Cobalt Pilot Bit

Category: Hole Saw Pilot Bits

GRE 62PTS-B-3/4 BIT,BULK-3/4"

Category: Bi-Metal Hole Saws

Hole Saw, Bi-Metal, Diameter: 1-1/8 inch, 50-Pack

Category: Bi-Metal Hole Saws