Hand Tools

Ratcheting Cable Cutter, Capacity: Copper (Up to 400 MCM), Aluminum/Multi-Conductor Cables (Up to 600 MCM), 10 Inch Length

Category: Cable Cutters

9-1/2" Journeyman High-Leverage Cable Cutter, Capacity: 4/0 Aluminum, 2/0 Soft Copper, 100-pair 24 AWG Communications Wire

Category: Cable Cutters

8-in-1 Multi-Bit Adjustable Length Stubby Screwdriver, Adjustable Length Screwdriver, Shaft Removes To Be Impact Driver Attachment, Nut Driver Sizes: 1/4'' (0.6 cm), Phillips Bits: #1, #2, #3, Slotted Bits: 3/16'' (0.5 cm), 1/4'' (0.6 cm), Square Bits: #1, #2, Magnetic Bit Retention

Category: Multi-Bit Screwdrivers

Impact Flip Socket Set Includes 3 Flip Sockets, A 1/4-Inch Bit Holding Feature, And A Quick-Connect Handle, Hex Sizes Include 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 1/2-Inch, And 9/16-Inch, Hex Shaft And Sockets Are Impact-Rated And Designed For Heavy-Duty Applications, Rare-Earth Magnet To Retain Fasteners For Convenient And Easy Driving, Color-Coded Hex Sizes For Easy Size Identification, Flip Sockets Can Be Stored In Any Order Or Orientation On The Shaft, Cushion-Grip™ Handle Allows For Greater Torque And Comfort

Category: Sockets & Socket Sets

8-1/16" High Leverage Diagonal Cutting Pliers, 2000 Series, Jaw Length: 13/16"

Category: Diagonal Cutting Pliers

Aviation Snips with Wire Cutter, Straight, Cuts 18-22 Gauge Stainless Steel

Category: Aviation Snips

14-in-1 Multi-Bit Adjustable Length Screwdriver, Shaft Removes To Be Impact Driver Attachment, Nut Driver Sizes: 1/4'' (0.6 cm), Phillips Bits: #0, #1, #2, #3, Slotted Bits: 3/16'' (0.5 cm), 1/4'' (0.6 cm), Square Bits: #1, #2, Combo Bits: #2, TORX® Bits: T10, T15, T20 & T25, Magnetic Bit Retention

Category: Multi-Bit Screwdrivers

Quick-Adjust KlawÖ Pump Pliers, 10-Inch

Category: Adjustable Pliers

Replacement Blades for Cable Skinning Folding Utility Knife, Material, 440A Stainless Steel, Blade Length: 2-1/2"

Category: Folding & Lockback Knives

Cable Skinning Utility Knife, Replaceable Blade, Material: 440A Stainless steel, Blade Length: 2-1/2", Blade Thickness 15/64", Hangle Length: 4-3/4"

Category: Folding & Lockback Knives

Locknut Wrench Set Features Opposing Offset Bends Allowing For Access To Difficult To Reach Locknuts, Three Wrenches Included For Most Commonly Used Conduit Sizes, 1/2-Inch, 3/4-Inch And 1-Inch, Two Internal Magnets On Each Wrench Hold The Set Together For Easy Storage, The Slim Alloyed Steel Design Allows For Access When Space Is Limited, Each Wrench Is A Different Color And Marked To Easily Identify Size, Hooked Tip Latches On Locknut For Ultimate Turn Leverage, Steel Design Is Corrosive Resistant And Durable

Category: Combination Wrench Sets

Wire Stripper/Cutter, Capacity: 16-26 AWG Stranded

Category: Wire Strippers

Screwdriver, Length: 11-5/16", Shank Length: 7", Phillips (#2)

Category: Phillips Tip Screwdrivers

28-Piece Socket Set Features: #1, #2 Phillips, 1/4-Inch Slotted, #2 Square, T20 Torx® , And Socket Sizes: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4-Inch And 8 To 17 Mm, Cushion-Grip™ Pass Through Screwdriver Handle Receives Knect™ (M) Sockets Or Adapters, Pass Through 90-Tooth Socket Wrench Drives Hex Nuts On Threaded Rods And Extended Bolts, Requiring Only 4 Degrees Of Swing For Use In Tight Spaces, A 20-Percent Improvement Over 72-Tooth Ratchets, Knect™ (M) Specialized Square-Drive Adapter Allows Any Square-Drive Socket To Be Used On The Pass Through Wrench, 1/4-Inch Magnetic Socket Doubles As A Standard 1/4-Inch Bit Holder, Impact-Rated Adapter Allows All Components To Be Used On A 1/4-Inch Impact Driver, Compact, Modular Storage System Is Designed To Nest Neatly Within The Klein Modbox™ System

Category: Sockets & Socket Sets

Hand Tool (Plier-Type) for Installing A, B, C, PT Non-insulated Terminals and Splices, Includes Wire Cutter

Category: Wire Crimping / Cutting Tools

Strips 10-28 AWG Wire, Crimps 4 Connectors, Double Dipped Comfort Grip Handles Designed for Optimal Leverage

Category: Combination Wire Stripper / Cutter Tools

15-in-1 Multi-Bit Ratcheting Screwdriver, Ratcheting-Directions: Forward, Fixed, Reverse; On-Board Bit Storage, Nut Driver Sizes: 1/4'' (0.6 cm), Phillips Bits: #0, #1, #2, #3, Slotted Bits: 3/16'' (0.5 cm), 1/4'' (0.6 cm), Square Bits: #1, #2, Combo Bits: #1, #2, TORX® Bits: T10, T15, T20, T25

Category: Multi-Bit Screwdrivers

6-in-1 Tapping Tool, Thread Sizes: 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20

Category: Six-In-One Tapping Tools

9" Lighted Level, Magnetic, V-Grooved Edge, Vials: (3), Material: Aluminum, Batteries: 2 AAA

Category: Torpedo Levels

Electrician's Pocket Knife, Material: Stainless Steel Blade, Anodized Aluminum Handle, Blade Length: 3-3/4", Open Length; 8", Wire Stripping Notches from Closed or Open Position, Position Lock, Pocket Clip.

Category: Folding & Lockback Knives

8-3/8" All-purpose Pliers, Strip and Cuts: 8-16 AWG Solid, 12-20 AWG Stranded, Jaw Length: 2-1/4"

Category: Long Nose Pliers

Klein Tools Tape Measures deliver performance and durability expected by professional tradespeople. Safeguarded by a thick and durable protective nylon-coating, the Tough Blade stands out to 13-Foot. Able to endure the toughest of jobsite conditions, this tool also features a strong magnetic double hook, easy-to-read bold lines, and a retraction brake.

Category: Tape Measures & Rulers

Pocket Knife, Blade Length: 3-1/2", Material: Stainless Steel.

Category: 1-Blade Pocket Knives

CAULK GUN 1/UNIT

Category: Caulking Guns