Conduit, Cable
1,464 Found
nVent Caddy
Multi-Function Clip, 1/4"-3/8" Rod, #12–#8 Wire, 1/8"–7/16" Flange, 1/4" Screw
Item #: 48795
CAT #: 4Z4S
UPC: 782856463146
Company wide:
nVent Caddy
Conduit Hanger With Bolt, 4" EMT, 4" Rigid, Steel
Item #: 80260
CAT #: CD9B
UPC: 782856120094
Company wide:
Hubbell-Raco
Conduit Hanger with Bolt, Diameter: 4", Steel
Item #: 271748
CAT #: 2061
UPC: 050169020616
Company wide:
nVent Caddy
Conduit Hanger With Bolt, 1 1/4" EMT, Steel
Item #: 80245
CAT #: CD2.5B
UPC: 782856120254
Company wide:
nVent Caddy
H-MSM Conduit/Pipe to Flange Clip, Side Mount, 3/4", 1" EMT, 5/16"–1/2" Flange
Item #: 80146
CAT #: 16M58SM
UPC: 782856122166
Company wide:
Burndy
Cable Tray Ground Clamp, 6 AWG - 250 MCM, Aluminum
Item #: 1780684
CAT #: BTCGC250SS
UPC: 621945505957
Company wide:
nVent Caddy
H-MSM Conduit/Pipe to Flange Clip, Side Mount, 1 1/4" EMT, 1/8"–1/4" Flange
Item #: 21179
CAT #: 20M24SM
UPC: 782856112204
Company wide:
Panduit
Beam Clamp for 1/8" - 1/4" Flange with 1
Item #: 669379
CAT #: PM24S
UPC: 074983629800
Company wide:
Eaton B-Line
ROD & WIRE FS, #12 WIRE THRU 1/4" PLN ROD
Item #: 269677
CAT #: BW2
UPC: 781011197001
Company wide:
Thomas & Betts
Steel City Conduit Hanger W/ Bolt, Hex Nut, 2 IN, Steel, Electro-Ga
Item #: 69991
CAT #: 6H5-B
UPC: 785991504965
Company wide:
nVent Caddy
Rooftop Pyramid 50 Foam-Based Support, EG, 4"
Item #: 80622
CAT #: RPS50H4EG
UPC: 782856586050
Company wide:
nVent Caddy
EM-P Conduit to Flange Clip, 1" EMT, 3/4" Rigid, 1.181"–1.378" OD, 1/8"–1/4" Flange
Item #: 46984
CAT #: 16P24
UPC: 782856162667
Company wide:
nVent Caddy
Cable Snap Clip, 3/16–9/32" Flange 0.472–0.551"
Item #: 18453
CAT #: SC4D
UPC: 782856798200
Company wide:
Eaton B-Line
Conduit to Beam Fastener, Type: Hammer-On, 1/2 to 3/4" Pipe, Steel
Item #: 271596
CAT #: BG-8-12-E-5-8
UPC: 781011185107
Company wide:
nVent Caddy
Conduit to Flange Clip, 3/4" EMT, 1/2" Rigid, 1/8"–1/4" Flange
Item #: 80003
CAT #: 12P24
UPC: 782856162629
Company wide:
nVent Caddy
Conduit to Flange Clip Side Mount 3/4" EMT, 0.125–0.25" Flange
Item #: 48193
CAT #: 12P24SM
UPC: 782856112624
Company wide:
American Fittings
Conduit Hanger With Bolt, 3/4" Diameter, Steel With Zinc Finish
Item #: 32553
CAT #: CHB1US
UPC: 662364520039
Company wide:
nVent Caddy
Conduit Hanger With Bolt, 3" EMT, 3" Rigid, Steel
Item #: 80275
CAT #: CD7B
UPC: 782856120070
Company wide:
nVent Caddy
Cable/Conduit Clip, 1", 1 1/4" EMT, 3/4", 1" Rigid, 1.654" Max
Item #: 47522
CAT #: K20
UPC: 782856245209
Company wide:
nVent Caddy
Snap Close Conduit/Pipe Clamp, 1/2", 3/4" EMT, 1/2", 3/4" Rigid/Pipe, 9/32" Hole
Item #: 18687
CAT #: 812M
UPC: 782856702108
Company wide:
nVent Caddy
Conduit Hanger With Bolt, 2-1/2" EMT, 2-1/2" Rigid, Steel
Item #: 80290
CAT #: CD6B
UPC: 782856120063
Company wide:
Eaton B-Line
FLEXIBLE FASTENER, DOUBLE RUNS
Item #: 399219
CAT #: BX4M
UPC: 781011010805
Company wide:
Eaton B-Line
Rod/Wire Clip, #12 Wire to 1/4" Rod, Flange 1/8 - 3/8", Steel
Item #: 527970
CAT #: BW2S
UPC: 782051401561
Company wide:
Eaton B-Line
UNIVERSAL BM FS, 1/8" TO 1/4" FLANGE
Item #: 269056
CAT #: BU-2-4
UPC: 781011196004
Company wide:
nVent Caddy
Multi-Function Clip, 1/4"-3/8" Rod, #12–#8 Wire, 1/8"–7/16" Flange, 1/4" Screw
Multi-function clip with 1/4-20" stud and hex nut - Wire Size #12 wire thru 1/4" - Flange Size 1/8"-3/8" Standard Package Quantity: 100.
Item #: 48795
CAT #: 4Z4S
UPC: 782856463146
Category:
Cable/Conduit From Drop Wire Support
Company wide:
nVent Caddy
Conduit Hanger With Bolt, 4" EMT, 4" Rigid, Steel
Conduit Hanger With Bolt, 4 Inch EMT, 4 Inch Rigid, 5/16 Inch Hole, Steel With Galvanized Finish, For Use With Rigid/EMT Conduit
Item #: 80260
CAT #: CD9B
UPC: 782856120094
Category:
Conduit Clamps
Company wide:
Hubbell-Raco
Conduit Hanger with Bolt, Diameter: 4", Steel
Conduit Hanger with Bolt, Diameter: 4 Inch, Steel, For Use With Rigid/IMC/EMT to Threaded Rod
Item #: 271748
CAT #: 2061
UPC: 050169020616
Category:
Conduit Clamps
Company wide:
nVent Caddy
Conduit Hanger With Bolt, 1 1/4" EMT, Steel
Conduit Hanger With Bolt, 1 1/4 Inch EMT, Steel
Item #: 80245
CAT #: CD2.5B
UPC: 782856120254
Category:
Conduit Clamps
Company wide:
nVent Caddy
H-MSM Conduit/Pipe to Flange Clip, Side Mount, 3/4", 1" EMT, 5/16"–1/2" Flange
Flange-Mount Conduit Clips, Snap-Close, 1 Inch Hammer-On Pipe Clip for Flanges 5/16 Inch to 1/2 Inch, Load Limit: 75 lbs. Standard Packaging Quantity: 100.
Item #: 80146
CAT #: 16M58SM
UPC: 782856122166
Category:
Flange-Mount Cable/Conduit Clips
Made in USA
Company wide:
Burndy
Cable Tray Ground Clamp, 6 AWG - 250 MCM, Aluminum
Cable Tray Ground Clamp, 6 AWG - 250 MCM, Aluminum With Tin Plating, Stainless Steel Hardware, Suitable for Outdoor Applications With Flange In/Out Cable Tray Design
Item #: 1780684
CAT #: BTCGC250SS
UPC: 621945505957
Category:
Cable Tray Clamps
Company wide:
nVent Caddy
H-MSM Conduit/Pipe to Flange Clip, Side Mount, 1 1/4" EMT, 1/8"–1/4" Flange
Flange-Mount Conduit Clips, Snap-Close, 1-1/4 Inch Hammer-On Pipe Clip for Flanges 1/8 Inch to 1/4 Inch, Load Limit: 75 lbs. Standard Packaging Quantity: 100.
Item #: 21179
CAT #: 20M24SM
UPC: 782856112204
Category:
Flange-Mount Cable/Conduit Clips
Made in USA
Company wide:
Panduit
Beam Clamp for 1/8" - 1/4" Flange with 1
Beam clamp for 1/8" - 1/4" flange with 1/4"-20 stud, static load capacity: 75 lbs.
Item #: 669379
CAT #: PM24S
UPC: 074983629800
Category:
Flange Clips
Made in USA
Company wide:
Eaton B-Line
ROD & WIRE FS, #12 WIRE THRU 1/4" PLN ROD
Eaton B-Line series all threaded rod and drop wire supports, Conduit and cable, Flange, 1" Height, 1" Length, 1" Width, 0.03lbs, Rod and wire fasteners, .13" Min mount size, .38" Max mount size, #10-24 or .25" rod size
Item #: 269677
CAT #: BW2
UPC: 781011197001
Category:
Conduit Hangers From Wire/Rod & Beam
Company wide:
Thomas & Betts
Steel City Conduit Hanger W/ Bolt, Hex Nut, 2 IN, Steel, Electro-Ga
Steel City Conduit Hanger W/ Bolt, Hex Nut, 2 IN, Steel, Electro-Galvanized
Item #: 69991
CAT #: 6H5-B
UPC: 785991504965
Category:
Conduit Clamps
Company wide:
nVent Caddy
Rooftop Pyramid 50 Foam-Based Support, EG, 4"
Rooftop Pipe Support, 4" Pier, Supports 50 Pound Loads
Item #: 80622
CAT #: RPS50H4EG
UPC: 782856586050
Category:
Pyramid Pipe & Equipment Supports
Made in USA
Company wide:
nVent Caddy
EM-P Conduit to Flange Clip, 1" EMT, 3/4" Rigid, 1.181"–1.378" OD, 1/8"–1/4" Flange
Flange-Mount Conduit Clip, 1 Inch Conduit to 1/8 Inch - 1/4 Inch Flanges, Material/Finish: Steel, Load Limit: 25 lbs. Standard Packaging Quantity: 100
Item #: 46984
CAT #: 16P24
UPC: 782856162667
Category:
Flange-Mount Cable/Conduit Clips
Made in USA
Company wide:
nVent Caddy
Cable Snap Clip, 3/16–9/32" Flange 0.472–0.551"
Cable Snap Clip, Low voltage, data and MC/AC cable to 3/16" thru 9/32" flange thickness, 0.468"–0.562" OD, Standard Packaging Quantity: 100.
Item #: 18453
CAT #: SC4D
UPC: 782856798200
Category:
Flange-Mount Cable/Conduit Clips
Made in USA
Company wide:
Eaton B-Line
Conduit to Beam Fastener, Type: Hammer-On, 1/2 to 3/4" Pipe, Steel
Conduit to Beam Fastener, 1/2 to 3/4 Inch Conduit, 5/16 to 1/2 Inch Flange, Side-Mount, Guide-Rite, Will Rotate 360 Degrees, Install with Hammer and Pliers
Item #: 271596
CAT #: BG-8-12-E-5-8
UPC: 781011185107
Category:
Flange-Mount Cable/Conduit Clips
Made in USA
Company wide:
nVent Caddy
Conduit to Flange Clip, 3/4" EMT, 1/2" Rigid, 1/8"–1/4" Flange
3/4" conduit to 1/8" to 1/4" flanges. Load Limit: 25 lbs. Standard Packaging Quantity: 100
Item #: 80003
CAT #: 12P24
UPC: 782856162629
Category:
Flange-Mount Cable/Conduit Clips
Made in USA
Company wide:
nVent Caddy
Conduit to Flange Clip Side Mount 3/4" EMT, 0.125–0.25" Flange
Flange-Mount Conduit Clip (Push-in). 3/4" conduit to 1/8" to 1/4" flanges. Load Limit: 15 lbs. Standard Packaging Quantity: 100.
Item #: 48193
CAT #: 12P24SM
UPC: 782856112624
Category:
Flange-Mount Cable/Conduit Clips
Made in USA
Company wide:
American Fittings
Conduit Hanger With Bolt, 3/4" Diameter, Steel With Zinc Finish
Conduit Hanger With Bolt, 3/4 Inch Diameter, Steel With Zinc Finish, For Use With Rigid or EMT Conduit
Item #: 32553
CAT #: CHB1US
UPC: 662364520039
Category:
Conduit Clamps
Company wide:
nVent Caddy
Conduit Hanger With Bolt, 3" EMT, 3" Rigid, Steel
Conduit Hanger With Bolt, 3 Inch EMT, 3 Inch Rigid, 5/16 Inch Hole, Steel With Galvanized Finish, For Use With Rigid/EMT Conduit
Item #: 80275
CAT #: CD7B
UPC: 782856120070
Category:
Conduit Clamps
Company wide:
nVent Caddy
Cable/Conduit Clip, 1", 1 1/4" EMT, 3/4", 1" Rigid, 1.654" Max
Conduit Hanger 1-1/4" EMT and Smaller Rods or Flanges. Standard Packaging Quantity: 100.
Item #: 47522
CAT #: K20
UPC: 782856245209
Category:
Conduit Hangers From Wire/Rod & Beam
Made in USA
Company wide:
nVent Caddy
Snap Close Conduit/Pipe Clamp, 1/2", 3/4" EMT, 1/2", 3/4" Rigid/Pipe, 9/32" Hole
M Clips conduit clip. For 1/2"-3/4" conduit. Has 9/32" Plain Mounting Hole. Load limit (vertical): 100 lbs. Load limit (horizontal): 25 lbs. Standard Packaging Quantity: 100.
Item #: 18687
CAT #: 812M
UPC: 782856702108
Category:
Conduit Clips
Made in USA
Company wide:
nVent Caddy
Conduit Hanger With Bolt, 2-1/2" EMT, 2-1/2" Rigid, Steel
Conduit Hanger With Bolt, 2-1/2 Inch EMT, 2-1/2 Inch Rigid, 5/16 Inch Hole, Steel With Galvanized Finish, For Use With Rigid/EMT Conduit
Item #: 80290
CAT #: CD6B
UPC: 782856120063
Category:
Conduit Clamps
Company wide:
Eaton B-Line
FLEXIBLE FASTENER, DOUBLE RUNS
FLEXIBLE FASTENER, DOUBLE RUNS
Item #: 399219
CAT #: BX4M
UPC: 781011010805
Category:
Flange-Mount Cable/Conduit Clips
Company wide:
Eaton B-Line
Rod/Wire Clip, #12 Wire to 1/4" Rod, Flange 1/8 - 3/8", Steel
Rod/Wire Clip, #12 Wire to 1/4 Inch Rod, Flange 1/8 - 3/8 Inch, Steel
Item #: 527970
CAT #: BW2S
UPC: 782051401561
Category:
Cable/Conduit From Drop Wire Support
Made in USA
Company wide:
Eaton B-Line
UNIVERSAL BM FS, 1/8" TO 1/4" FLANGE
Eaton B-Line series beam fasteners, Beams, Flange, 1" Height, 1" Length, 1" Width, 0.05lbs, Universal beam fasteners, .13" Min mount size, .25" Max mount size
Item #: 269056
CAT #: BU-2-4
UPC: 781011196004
Category:
Flange Clips
Company wide:
1,464 Items found