Search results

Transformer, Dry Type, Type QL, 225 KV, 480 Delta - 208Y/120 Volt AC, 150C Rise

Category: 225 - 300 KVA Dry Type Transformers

ABB's Machine tool core and coil transformers are isolation transformers designed to provide a high degree of secondary voltage stability (regulation) during a brief period of overload condition (also referred to as ?inrush current?). They are ideal for applications where power regulation and space optimization are critical. Machine tool core and coil transformers feature welded cores to deliver outstanding performance, long life, and quiet operation.

Category: 130 - 300 VA Industrial Control Transformers

Transformer, Machine Tool, 1.5 kVA, 230/460 - 115, Open

Category: 1 - 1.6 KVA Industrial Control Transformers

TRANSFORMER

Category: 130 - 300 VA Industrial Control Transformers

Transformer, Control, Terminal Board Connection, 80 VA, 120/240 - 12/24, Open

Category: Up To 500 VA Buck-Boost Transformers

Transformer, Wall Mount Bracket, Painted Steel, Frame UX74/UY74, DX75/DY75

Category: Transformer Wall Mount Brackets

Transformer, Dry Type, 5 kVA, 240/480 Volt AC, Primary, 120/240 Volt AC Secondary, 115D Rise

Category: 5 KVA Dry Type Transformers

Transformer, Dry Type, 10 kVA, 240/480 Volt AC, Primary, 120/240 Volt AC Secondary, 115D Rise

Category: 10 - 12 KVA Dry Type Transformers

ABB's Machine tool core and coil transformers are isolation transformers designed to provide a high degree of secondary voltage stability (regulation) during a brief period of overload condition (also referred to as ?inrush current?). They are ideal for applications where power regulation and space optimization are critical. Machine tool core and coil transformers feature welded cores to deliver outstanding performance, long life, and quiet operation.

Category: 250 - 450 VA Industrial Control Transformers

Abb; Power Supply; Voltage Rating: Input: 90 - 264 Vac/210 - 370 Vdc, Output: 24vdc; Amperage Rating: Input: 600 Milamp At 115 Vac, 344 Milamp At 230 Vac, Output: 1.3 Amp At Less Than Or Equal To 60 Deg C; Wattage: 30 Wtt; Frequency Rating:47 - 63 Hz; Phase: 1 Ph; Fuse Rating: 2 Amp At 250 Vac Slow Acting; Material: Plastic Housing; Efficiency: 83 Pct; Insulation: Rated Insulation Voltage Ui: Input/output - 3 Kvac; Cable Size: Fine Strand With/without Wire End Ferrule And Rigid: 24 - 14 Awg (input/output); Enclosure: Ip20; Environmental Conditions: Operating Temperature: -40 To 70 Deg C, Rated Load: -40 To 60 Deg C, Storage Temperature: -40 To 85 Deg C, Damp Heat, Cyclic: (4) 24 Hr Cycles, 40 Deg C, 95 Pct Rh;width: 53 Mm; Height: 91 Mm; Control Time: Less Than 1 Ms; Current Limiting At Short Circuit: 4.2 Amp; Power Failure Buffering Time: 30 Ms; Rise Time: 1 Ms; Tightening Torque: 0.36 - 0.56 N-m; Inrush Current Limiting: 50 Amp At 230 Vac; Wire Strip Length: 6 Mm; Power Consumption: 37.92 Wtt At 110 Vac, 38.16 Wtt At 230vac; Depth: 57.5 Mm

Category: 1-Phase DC Power Supplies

ABB's General purpose encapsulated open core, and coil transformer (also known as Type IP Control Power transformers) are ideally suited for industrial and light-duty loads, HVAC applications, signal and alarm systems, industrial control panels, lighting, and circuit isolation. The optional fuse block adapter kits enable input and output flexibility. Type IP Control Power transformers are an economical alternative to high in-rush/machine tool transformers.

Category: 60 - 100 VA Industrial Control Transformers

Transformer, Control, Terminal Board Connection, 150VA, 240 x 480 - 12/24, Open

Category: 130 - 300 VA Industrial Control Transformers

Core and coil transformers for machine tool applications are used to provide voltage to control devices in applications where regulation and minimum space are important. Fully encapsulated coil is impervious to moisture-Pressure plate terminals ensure secure connections-Terminal board is anchored in the epoxy for greater reliability-Wide variety of fusing options-Rugged, high-impact plastic terminal board-Full head 8 brass screws assure quick, easy terminations with maximum connection integrity-Copper windings -Flexible design allows inp ut or ou tput volta ge to ma tch a ny app lication-CUL, CE, UL approvals-Available fuse-clips offer simple, low-cost fusing with terminal block models and minimum space are important. 58K2808

Category: 250 - 450 VA Industrial Control Transformers

Transformer, Machine Tool, 0.5 kVA, 208/277/380 - 115/95, Open

Category: 500 - 800 VA Industrial Control Transformers

These GE transformers feature an encapsulated core and coil in a NEMA 3R non-ventilated weatherproof enclosure. UL Listed-C-UL Listed-Knockouts provided on back and bottom-High grade silicon steel core-Mounting holes on side for easy access- Wiring compartment includes ground stud 51B0008

Category: 251 - 999 VA Dry Type Transformers

Transformer, Control, Terminal Board Connection, 250 VA, 240 x 480 - 120/240, Open

Category: 250 - 450 VA Industrial Control Transformers