Raceway Boxes - 2-Gang

Two-Gang Device Box û Cover has twistouts for 2000, 500, and 700 Series Raceway. Base has 1/2" trade size KO and rectangular KO for extension to wall box. Base has #10 threaded hole for ground connection. Finish: white enamel finish.

Category: 2-Gang Raceway Device Boxes

Access Floor Module Cover, Length 5-7/8 Inches, Galvanized Steel, Duplex Cover Sloped 45 Degrees, Power Panel

Category: 2-Gang Raceway Box Covers

WMDG4047BR

Category: 2-Gang Raceway Box Covers

Labor saving, over-the-raceway device box. Divided two-gang box allows both power and low voltage at a single point-of-use. For use with commercially available faceplates. Fog White

Category: 2-Gang Raceway Device Boxes

Two-gang device box with extra depth to allow installation of cabling that requires greater bend radius and storage. Cover has twistout on all four sides for 2400 Series Raceway. Base has knockout to enable extension from existing single-gang flush wall box and 1/2" and 1" concentric trade size KOs. Accepts industry standard faceplates for electrical and communication devices. NOTE: Accepts NEMA double-gang standard faceplates. Certified to Canadian Safety Standards for sale in Canada. When ordering this product for Canada, add "C" to the beginning of the part number to denote Canadian versions, i.e. "CV2444" or "C2444-FW". Fog White

Category: 2-Gang Raceway Device Boxes

Mounting Box, 1 Piece, 2-Gang, Raceway, Cable Entrance, Faceplate, 1.89 Inch Depth, White

Category: 2-Gang Raceway Device Boxes

Double gang power rated two-piece snap together outlet box. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD profile raceway. 5.00"L x 6.14"W x 1.62"H (127.1mm x 155.9mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diameter conduit.

Category: 2-Gang Raceway Device Boxes

Double gang faceplate frame accepts up to four 1/2 size module inserts or six 1/3 size module inserts

Category: 2-Gang Raceway Device Brackets & Plates

Double gang two-piece screw together divided outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard double gang faceplate. For use with Pan-Way® T-45 or LD profile raceway. 5.05"L x 5.05"W x 1.62"H (128.2mm x 128.2mm x 41.1mm). Breakout

Category: 2-Gang Raceway Device Boxes

Raceway Device Box, 1-Gang, Depth: 1.75", Non-MetallicRaceway Device Box, 1-Gang, Depth: 1.75 Inch, Non-Metallic

Category: 2-Gang Raceway Device Boxes

Fast-Snap™ Double Gang Power Rated Two-Piece Snap Together Outlet Box. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD profile raceway. 5.00"L x 6.14"W x 1.62"H (127.1mm x 155.9mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diamet

Category: 2-Gang Raceway Device Boxes

12-Fiber OM4 HD Flex Indoor Small Diamet12-Fiber OM4 HD Flex Indoor Small Diameter Trunk LSZH PanMPO Female To PanMPO Female, Method A, Optimized IL, Pulling Eye - 55 Meters

Category: 2-Gang Raceway Device Boxes

Metal Raceway, HBL500/HBL750 Series, Switch and Receptacle Box, Shallow, 2-Gang, Ivory

Category: 2-Gang Raceway Device Boxes

Double gang faceplate frame accepts up to four 1/2 size module inserts or six 1/3 size module inserts.

Category: 2-Gang Raceway Device Brackets & Plates

Double gang two-piece screw together divided outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard double gang faceplate. For use with Pan-Way® T-45 or LD profile raceway. 5.05"L x 5.05"W x 1.62"H (128.2mm x 128.2mm x 41.1mm). Breakout

Category: 2-Gang Raceway Device Boxes

HUB HBL5744S2IV RACEWAY, 2G BOX,

Category: 2-Gang Raceway Device Boxes

WIR 2344SD-2 NM DEEP BOX 2G IV

Category: 2-Gang Raceway Device Boxes

Fast-Snap™ Double Gang Power Rated Two-Piece Snap Together Outlet Box. Box accepts Pan-Way® Snap-On Faceplates. For use with Pan-Way® T-45 or LD profile raceway. 5.00"L x 6.14"W x 1.62"H (127.1mm x 155.9mm x 41.1mm). Breakouts for 1/2", 3/4", or 1" diamet

Category: 2-Gang Raceway Device Boxes

WIR V4047RH SINGLE DEVICE COVER

Category: 2-Gang Raceway Box Covers