Raceway Boxes - 1-Gang

Wm V2427ga Receptacle W/pigtail

Category: 1-Gang Raceway Duplex Receptacles

Will accommodate commercially available 15A or 20A duplex receptacles. Base has 1/2" and 3/4" concentric trade size KOs. Nonmetallic cover has 1500 and 2600 Series Raceway twistouts on all four sides. Two 1500WC Wire Clips included. Side wiring recommended. Gray finish. NOTE: Certified to Canadian Safety Standards. For sale in Canada. When ordering these products, add ôCö prefix to part number to denote the Canadian version, i.e ôC1546Bö.

Category: 1-Gang Raceway Duplex Receptacles

Non-Metallic, Blank Cover, 2300 Series. Size: 4-1/2" Diameter. PVC, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Device mounting bracket, PVC, Gray, Used to mount NEMA standard single gang electrical outlets and communication devices with either screw-on or snap-on single gang faceplates. Can be used with T-70, Twin-70, and TG-70 raceway.

Category: 1-Gang Raceway Device Brackets & Plates

Single gang two-piece screw together extension outlet box. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 4.99"L x 3.30"W x 1.00"H (126.7mm x 83.8mm x 25.4mm). Breakouts for 1/2", 3/4", or 1" diameter conduit.

Category: 1-Gang Raceway Device Boxes

W-mold 5748swh White Shallow box

Category: 1-Gang Raceway Switch & Receptacle Boxes

Snap-on single gang 106 duplex electrical/communication faceplate. Used to cover one NEMA standard 106 duplex electrical outlet. In communication applications, covers one standard 106 duplex communication module frame.

Category: 1-Gang Raceway Box Covers & Faceplates

Raceway Outlet Box, Low Voltage, 1-Gang, Non-Metallic, Off-White, Adhesive Backing, Use with Pan-Way LD Profile Raceway, 1-3/4" Deep

Category: 1-Gang Raceway Device Boxes

Steel, Downward Duplex Device Bracket, 2400 Series, Ivory.

Category: 1-Gang Raceway Device Brackets & Plates

Single gang one-piece outlet box with adhesive backing. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.09"L x 3.34"W x 1.75"H (129.4mm x 85.0mm x 44.4mm). Breakouts for 1/2"

Category: 1-Gang Raceway Device Boxes

Non-Metallic, 6A, Mini Adapter Bezel Opening. Black.

Category: 1-Gang Raceway Box Extension Adapters

Single Gang Two-Piece Screw Together Intermediate Outlet Box, Use with Pan-Way LD Profile Raceway. Length: 5.1 Inch, Width: 3.4 Inch, Heigth: 2.3 Inch, Off-White

Category: 1-Gang Raceway Device Boxes

Single gang two-piece screw together round outlet box. Box accepts UL/CSA devices not to exceed 10lbs. (5lbs. per CSA). For use with Pan-Way® LD profile raceway. Dia. = 5.48"D x 1.14"H (139.2mm x 29.0mm). Breakouts for 3/4" or 1" diameter conduit.

Category: 1-Gang Raceway Device Boxes

Electrical/Communication Faceplate, 1-Gang, T70/TG-70/Twin 70 Raceway, Off-White

Category: 1-Gang Raceway Box Covers & Faceplates

Steel, Circuit Breaker Housing, Color: Gray

Category: 1-Gang Raceway Device Boxes

Nm Single Recpt Box 1500 Gray

Category: 1-Gang Raceway Telephone Outlets

Use with any nonmetallic round device box to convert into a junction box. Ivory

Category: 1-Gang Raceway Box Covers & Faceplates

Raceway Outlet Box, 1-Gang, Non-Metallic, Adhesive Backing, For use withT-70 and Twin-70 raceway only.y, 1.49" Height, 4.09" Length, 2.34" Width.. Color: Gray

Category: 1-Gang Raceway Device Boxes

Non-Metallic, 6A, Mini Adapter Bezel Opening. Gray.

Category: 1-Gang Raceway Box Extension Adapters

Single gang one-piece deep outlet box with adhesive backing. Box accepts Pan-Way® Screw-On Faceplates or any NEMA standard single gang faceplate. For use with Pan-Way® LD profile raceway. 5.23in L x 3.48in W x 2.75in H (133.0mm x 88.5mm x 69.8mm). Breakou

Category: 1-Gang Raceway Device Boxes

Snap-on horizontal sloped communication faceplate. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on vertical sloped communication faceplate. Accepts two Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, White.

Category: 1-Gang Raceway Box Covers & Faceplates

Snap-on vertical sloped communication faceplate. Accepts four Panduit® Mini-Com® Modules (not included). No additional mounting hardware required, Electric Ivory.

Category: 1-Gang Raceway Box Covers & Faceplates

Non-Metallic, Ortronics® Faceplate, 5500 Series. Size: 4-1/4" Length, 1-11/16" Width. PVC, Fog White.

Category: 1-Gang Raceway Box Covers & Faceplates